Try unplugging your TV for about 10 minutes and also hold the power button on the TV for about one minute and then plug your TV back in again and turn it on to see if the white screen is still showing up again. It could be the capacitors inside of the TV have gone bad or the powerboard is not working.Check the cables and the connections to your TV to make sure they are fully connected. Or the TV connections are bad and should be replaced.
Hi,
it's sounds like a group of the screens leds have overheated and/or burned out. If you just got the tv, this would be strange. However if you've owned it for years, then this might happen. Please attempt one power cycle and then flip through channels to see if the issue remains.
If so, you might need to set a tv diagnostic-appointment with a company like geeksquad/ home depot after attempting a factory reset on the tv.
Thank you.
Question edited for full 'make model (what it is)'.
Question moved to Sanyo.
Could be the power supply, it could be the main board. My advice regarding home television repair, unless our Television Expert Larry comes along.
https://www.fixya.com/support/r29790007-repairing_own_television
..
Is it attached to the aerial/cable socket.?
If it is, then the main control board has probably failed.?
Changing it out is a fiddly but achievable job, but it's probably only worth it if you can pickup a used replacement part from eBay or similar.?
Otherwise a brand new replacement board may be up to $150.?
Hi,
Please adjust your tv's contrast and brightness to try an overcome the issue. If there are accessories linked to your tv, please temporarily remove those accessories and restart your tv to see if the issue goes away.
If all else fails, a factory reset would be the next option.
Thank you.
No, because it isn't a smart television, just a nice one. Also it doesn't connect to the Internet.
https://www.sanyo-av.com/ca/product/product.php?id=570
This is because the Blu-ray movie you play is not officially released one and it is a copy one of Cinavia-prrotected Blu-ray movie.
To get rid of the Cinavia Message Code 3 on your player, you can try Leawo Blu-ray Cinavia Removal which is a program that can be able to remove the Cinavia protection with ease. With this protection removing tool, you can easily get a 1:1 Cinavia-free Blu-ray copy.