20 Most Recent Sanyo VWM-800 VHS VCR Questions & Answers

This link should help. http://www.manualslib.com/v/vwm-800.html?filter_type=id_manufacturer&filter_value=2922

Try this link out. Vwm 800 Free Pdf Manuals Download

Use channel up and down butten it will work for some vcrs

Check the sensor located at the entry of the tape on the VCR. Clean it and try.If this doesn't clear the problem then it is more complicated

Try these: 1022, 1045, 1047, 1070, 1131, 1172, 1192, 1203.

Give more details. Did open the cover for cleaning. The video heads ARE DELICATE, you can do more harm than good if you over-clean them.

I copiedanother one someone had. SoI was fortunate to do so.

Here is the manual for the next model up. It should be similar enough to fix your problem. I hope this helps. http://www.retrevo.com/support/Sanyo-VWM-900-VCRs-manual/id/311ag907/t/2/

Try to Google the model number of the remote for a "manual" which if old may not exist but if found will have codes to try.

Well there is a tiny button on the back of the VCR you can bearly see it but its there.
So you will have to take a small flatend screw driver like for eye glasses and see if it can press that button to see if the tape will now eject out. If not it will have to be repaired then.

Well you would have to take the VCR apart so that you can get your cats tail out of the VCR player.

Well it has happened with one of those tv's at my Gido's house in Windsor well a person that fixes theese electronics might be able to take out the tape and fix that tv then.

Your english is not good so I assuming you want to connect your VCR to copy the pictures to your PC?

The best way I have found is to get a Video Mate C100 Video/Audio Capture Card. This slots into a card slot on your pc and that's all you need do. You will need a scart lead for the VCR with phono plugs on. Image below.
The C100 comes with Software to convert and capture video and make DVD's.
You can get it at Ebuyer.
http://www.ebuyer.com/search?q=video+capture+card

video is yellow, audio are normally red and white, please rate me if this helps

You can attempt to do a full power off. Unplug the power cord. While unplugged press and hold the power button twice for 30 seconds each time to dissipate any residual power.Now plug it in and turn it on.
If this doesn't resolve the issue, I'm afraid that you are due for a new unit.

Sincerely,
Mark