Top 20 Sharp MD-MS702 Personal MiniDisc Player Questions & Answers

Well, what it means is TOC errors often mean the recording head/optical block is cooked. A cleaner might work, but often it's the end of the MDR. Are you sure the battery is correctly (fully) charged? Try removing the battery and running on (only) the charger. try cleaning the lens with a minidisc lens cleaner. open the unit and check the laser position - it should be all the way to the left. that's where it should start to read the disk. TOC errors often mean the recording head/optical block is cooked. A cleaner might work, but often it's the end of the MDR. Read these: https://groups.google.com/forum/#!topic/alt.audio.minidisc/63uCBegyG8A http://www.minidisc.org/repair_q2.html http://forums.sonyinsider.com/topic/21439-fun-with-the-sharp-702-utoc-error-fixed/ http://www.mazdas247.com/forum/showthread.php?98358-TOC-Error-on-brand-new-disc! http://www.borus.de/minidisc/303.htm

That does not sound good. Being optimistic, though, what happens if you record something and then finalize it? Will it play then?Will it play a previously recorded MD?

users manual http://www.minidisc.org/part_Sharp_MD-MS701+MS702.html

manual http://www.minidisc.org/part_Sharp_MD-MS701+MS702.html

Possible that the disc is not reading and so the the TOC- table of content error must be referred.
It can be due to a poor head tracking or the failure of the data being read or processed.
Clean the head and use a good disc to be checked once again. If so the optical head can be faulty as it might be getting weaker.

Unfortunately you've done all that you can. The unit is broken and parts are unavailable, even if they were, portable MD players were always fiddly and labour intensive to repair.

It's not all bad news though: as they're obsolete technology there are millions of perfectly good ones lying around unused and unwanted. Every single bit of minidisc equipment which I own has come from my local FreeCycle and Freegle groups, either as a response to an offer or via a request (but note that all such groups usually insist that you must make an offer before you can post a request, but there's no restriction on replying to offers already made).

When you FINISH recording, the Minidisc recorder Writes the TOC (Table of Contents) - so you see it flashing TOC or Update when you finish recording - you need to Leave POWER ON and have the unit on for about 30 seconds for it to finish this. IF you don't, the unit doesn't know where to find the files since there is no TOC. Try a Sony home unit - you might get one more shot at it working with that.

My friend got an owners manual from the sharp corp. website.
many thanks
edward

I'm sorry this isn't much help, but I had the same problem with my 702 unit. From what I've read it's very common with this model - Sharp claims to have remedied the error with their 831 unit. Luckily, when I had this problem, my recorder was still under warranty and I have to say that Sharp fixed it promptly and returned it to me. Have you tried contacting them? Since it's a design flaw, they might be amenable to working something out with you...

the solution which seems to have worked for most people is to take the unit apart and make sure that the ribbon cables inside the unit are all attached properly.

Marcus

You need Audio/Video Cables. Connect one end at TV Audio Out and other end to Amplifiers's Line In. It will work. I am sharing manuals for your help. Quick-Start-Guide-58Q7330.pdf (sharptvusa.com) User manual Harman Kardon AVR 146 (English - 60 pages)

I am uncertain how to present this to you. Press the ALARM ON/OFF button to turn off the alarm. If you want to turn on the alarm again, press the ALARM ON/OFF button once more. Detailed instructions regarding the controls can be found in a manual I think available at the following location: Sharp Alarm Clock Manuals and User Guides PDF Preview and Download (all-guidesbox.com) I don't have a guide to the internals of this clock but here is a tear down of a similar model if you are game to explore the workings. You could go through that and maybe get an idea of how the systems work together. If you are unable to fix the problem, you will find the contact details for Sharp support in the manual. Here is the tear down link: SHARP spc800 alarm clock Teardown - iFixit

Less than 12 months old so under warranty. Take it back for a free replacement.

Press the Set Time button. https://www.google.com/search?q=Sharp+alarm+clock+SPC005+manual ..

Look over your player and see if a program is set. Sometimes you can set a program on the CD player to play the first song on cds. Turn program play off. It’s sometimes called delete bank where all song are skipped except first track. Or you can have the repeat button on. Turn that off. There also could be a malfunction with the player. If your still having problems reset the system.

Sounds like the laser is stuck and cannot move because the slide motor has failed.

The basic binary errors are usually something small. 0000 is usually a cleaning error. I would try to clean the lens with the recommended cleaner and then try again. If problem persists the lens may be saying its dirty due to a scratch on it. These are hard to diagnose because it's a process to remove. I would clean it then replace the lens if needed.

Direct from the maker https://sharpclocks.com/support/

SPC1107 Manual_OL - Sharp

https://sharpclocks.com > uploads > 2019/01 > SP... PDF The remote sensor transmits the outdoor temperature. To receive the outdoor temperature, place the ... M.Z. Berger will repair or replace the clock.

• SPC1107A - SharpClocks

  https://sharpclocks.com > products > spc1107a The Sharp Atomic Clock will always be accurate to within one second as it receives daily WWVB updates. The Wireless Sensor transmits the outdoor temperature to ...