Top 20 Sharp 13VT-K100 13 in. Combo Questions & Answers


try ebay with the model number; I had the same thing with a sharp set I own---only way to access the menu and do things is with an original remote--if this was helpful please vote for me.

Sharp 13VT-K100... | 1,435 views | 4 helpful votes


If you Google the model number or look at:

http://www.audioreview.com/pscTelevisions/TV-VCR,Combo/PLS_2729_830crx.aspx

It shows on the above address having a msrp of $269.00

If this has helped you, I do this here for free so take just a minute and give me a vote here.

REGARDS, SD TECH

Sharp 13VT-K100... | 85 views | 0 helpful votes


Hello,This set is Analog and will need a converter boxThank you,Shuttle83http://www.electron-age-technologies-llc.com

Sharp 13VT-K100... | 135 views | 0 helpful votes


Hello, I want you to do a test first. Take you TV and connect a DVD player to it and see if this problem occurs. I bet you it wont, because the problem is not with the TV nor the CD of the karaoke machine. The problem is with the sync pulses of the signal from the karaoky, and the inability of the Tv to sync-up with those signals. What I would use is a video stabilizer between the TV and the DVD player. If the TV still has the problem with the DVD player I would then check the TV for a vertical section problem. I hope this helps, Thank you, Shuttle83 http://www.electron-age-technologies-llc.com

Sharp 13VT-K100... | 148 views | 0 helpful votes


on some models the menu button is on the front disguised as the volume up/down or channel up/down buttons. you have to push both up/down buttons on either one of these to bring up the menu.

Sharp 13VT-K100... | 816 views | 0 helpful votes


Greetings horsepoor2,

Yes, there are a few options for new remotes for this unit. You can find several of them at the "order parts" option found at the bottom of www.bestbuy.com. In fact there is an option to purchase the unit that matched up directly with your television
which is RRMCG1330PESA!

I hope this helps.

Thank you,

Dorothy
Go Ahead. Use Us.

Sharp 13VT-K100... | 258 views | 2 helpful votes


call tech support

Sharp 13VT-K100... | 204 views | 0 helpful votes


Ouirkygirl, a TV\VCR combo can only watch TV on a channel & record THAT channel. If the monitor is connected directly to the VCR then u should be able to RECORD what u see. Do you have a separate channel changer [buttons that say up\down channel ?] on the face of the VCR portion? If so, then u should be able to change the channel ON the VCR, record that channel, then change the channel ON the TV, .... I don't think so,.........any thing is possable

please explain your words :: "but when I record something it jumps to tha channel evern if I am watching something else at the time."

Sharp 13VT-K100... | 128 views | 0 helpful votes


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Sharp Televison... | 40 views | 0 helpful votes


unscrew cable and put antenna connection there change the source to air or antenna

Sharp Televison... | 34 views | 0 helpful votes


What is the model number of your TV?
Give us clear specifications. . If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician

Sharp Televison... | 27 views | 0 helpful votes


go into set up and go to diagnostics

Sharp Televison... | 30 views | 0 helpful votes


the only proper way is to remove the rear cover and resolder the connector back on the circuit board my advise is to get a tv engineer to fix it for you or you can use a differant input ie.scart or hdmi etc.using a set top box or a dvd recorder or similar using the tuner within that hope that helps you

Sharp Televison... | 31 views | 0 helpful votes


try checking input or source also see if set on game mode

Sharp Televison... | 38 views | 0 helpful votes


Maybe its anothr issue...chec utube or repairbooks in library

Sharp Televison... | 30 views | 0 helpful votes


please remove. Not a question!

Sharp Televison... | 27 views | 0 helpful votes

Not finding what you are looking for?
Sharp 13VT-K100 13 in. Combo Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Televison & Video

  • Sharp Televison & Video

Most Popular Question

any way access screen menu sharp 13f m50

  • Televison & Video
Loading...