Sharp SX9860 2-Channel Amplifier - Answered Questions & Fixed issues

The IC may be available through a source like Digikey if it is not propprietary to the amplifier.If it is proprietary to the amplifier, a site like encompassparts.com may have it.Otherwise you may need to search on Ebay for the part(s).

Which is it 9860 or 9800? (No web search hits for the 9800).

JVD Tuner?

The RCA jacks on any amp so-equipped are for any external Line Level source like a tuner.

In any 'connection' question there are at least two participants and specific answers require specific details about all joined equipment.

Type carefully if you want good answers.

2 channel power amp
you will need additional equipment for this beast to work right.
1. you need a pre-amp, all audio connections go into the preamp which control sorces, volm, bass and treble.
2. out from the preamp into the power amp and out to your speakers

3. you can freak it if you have an 1/8" stereo to RCA stereo plug in this caee you can play your ipod, phone or mp3 player thru this amp using your input device (ipod, phone or mp3 player ) like a preamp to control volm, bass and treble.

I assume you don't mean the mains lead. I think it's most likely a power lead for a turntable or something of that kind. If the plug has two pins on it, it could be what's known as a "USA Plug".

l means left r means right connect speaker wires by phono sockets or if no phono sockets then the wires go direct into the colour sockets red to red etc

check all fuses. Sounds like the power supply might be working, at least the transformer which you hear. Try fuses first then that's all you can do, unless you are a tech. You might have to remove the cover to see the fuses, and then again some fuses might not be a glass type. For you, only look for glass fuses. Make dang sure there is no power plugged in when you do this. A visual check for you is enough, as to explain how to use a meter would just be confusing. If you find a blown fuse ( the center wire is broke inside the glass) then take it out if it isn't soldered and make sure you get an exact match. After you replace it, if it blows again or still doesn't work then you need tech help. find a ham operator with techno skills, or take to a shop.

your best bet is to contact Sharp directly over the net, if not try googling the model# , there would be one out there somewhere, Ebay is also a good option, there are tonnes of service manuals on there for different electonic items, especially audio gear

Hi...
You can get fuses at radio shack

Try :

http://www.encompassparts.com/

For parts

You will need a preamp of some kind.

A unit with tone and volume controls.

An audio mixer would work too.

PLease rate my help if this helps...Thanks

apply a spray contact cleaner in headphone socket(the place where you put your headphone jack)-and insert the jack in and out many times because it maybe problem inside-check your speaker cable for good condition.and firmly connected.

any luck??

You need Audio/Video Cables. Connect one end at TV Audio Out and other end to Amplifiers's Line In. It will work. I am sharing manuals for your help. Quick-Start-Guide-58Q7330.pdf (sharptvusa.com) User manual Harman Kardon AVR 146 (English - 60 pages)

I am uncertain how to present this to you. Press the ALARM ON/OFF button to turn off the alarm. If you want to turn on the alarm again, press the ALARM ON/OFF button once more. Detailed instructions regarding the controls can be found in a manual I think available at the following location: Sharp Alarm Clock Manuals and User Guides PDF Preview and Download (all-guidesbox.com) I don't have a guide to the internals of this clock but here is a tear down of a similar model if you are game to explore the workings. You could go through that and maybe get an idea of how the systems work together. If you are unable to fix the problem, you will find the contact details for Sharp support in the manual. Here is the tear down link: SHARP spc800 alarm clock Teardown - iFixit

Less than 12 months old so under warranty. Take it back for a free replacement.

sharper image su502 world time clock/radio To set the time: Make sure the 'power' is OFF by depressing the PWR button Depress MODE to start the setup and depress that key to accept each setting

The SPC900 has 2 alarms. On the back of the unit there is a buttion labeled "Alarm On/Off". Press the that button to cycle through the alarm on/off possibilties. On the screen you will see what alarm(s) is (are) turned on. There are4 possible settings: off (no alarms displayed), alarm 1 only, alarm 2 only or both alarms. The indicators are just above the seconds display and to the right of the big hour/minute display.

Press the Set Time button. https://www.google.com/search?q=Sharp+alarm+clock+SPC005+manual ..