Sharp XL-HP515 CD Shelf System - Answered Questions & Fixed issues

1)Press the ON/STAND-BY button to turn the power on.

2)Press the CD button.
3)Press the1 button and within 5 seconds, press the OPEN/CLOSE button to open the disc tray 1.

4)Place the CD on the disc tray 1, label side up.

Be sure to place 8 cm (3") CD in the middle of the disc trays.

5)Press the OPEN/CLOSE button to close the disc tray 1.

------------

6) You can place discs on the trays 2 - 5 by following steps 3 - 5.

7) Press the forward / reverse button to start playback.

And the unit will start playing. See CD play indicator.

--------

Playback will begin from track 1 on the DISC 1. After that disc fin

ishes playing, the next disc will automatically play.

"After the last track on the fifth disc is played, the CD player stops

automatically.

"When there is no CD in one of the disc trays (1 - 5), the empty

tray will be skipped to the next tray with a CD.

---------------------

This will help.Thanks.Helpmech.

Hi Russell,
Click the link http://shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=sharp+xl-hp515&_sacat=See-All-Categories to see the price of that unit.
Hope it may help you.
Give a thumb if you find it useful.
Have a nice day.

After you shut it off, push the x-bass/demo button.

If you're using an old-school turntable that doesn't contain a phono preamp that will happen.

A traditional turntable requires a Phono preamp inline with it to PRE amplify and frequency-balance the minute signal produced by it's cartridge for later amplification by a power amp. Most stereo receivers and preamps have Phono connections and internal preamplification strictly for that purpose.

Recent AV Receivers generally do not.

The result would be very low, tinny sound.

If so, you need to get an external Phono Preamplifier.

Some modern TT

dear sir good day you can get it from http://www.dealtime.com/xPO-Sharp-150W-Micro-System-with-5-CD-Changer-2-Way-Speaker-System-Silver-Gray-XLHP515 and if it not cheap you can get a universal remote from any radioshake store thanks

HI.This will occur when the optical assembly becomes unstable. this ((Whole One Piece)), assembly incorporates the spin/load motor, optics housing /arm, tracking device and tracking rail. This is connected to the loading dock assembly. This 'NO Disc' or CD NOT PLAYABLE, code is the result of a failed or burned out lens. It is possible that you have a dirty lens cap. you can try using a cleaning disk in this case to confirm actual lens failure. if the cleaning doesn't restore normal reading capabilities, this will confirm my diagnosis.

You will need to have the optical assembly replaced in this case. once replaced, your unit will be able to read and track once more.

Undo the screws and take the cover of you'll be able to take them out ... But only if you don't have a warranty if u have the take it to the place where u bought it from

Ther clicking is probably coming from a relay and it is cycling because either the power supply itself or possibly an audio output power module has failed, the latter will overload the power supply so it tries to protect itself by interrupting either the AC or a DC voltage supplied by it.
This problem will likely require the hands-on of technical help. 

You need to identify the fault using a multimeter

Compra un disco limpiador de lentes laser y puede que esto solucione tu problema ya que puede ser solo suciedad en el lente.

when it says "hello" do all lights randomly light up? if they do, press "X-BASS"

wait a bit... it will happen with all the other decks, too. we had this happen and the first time the suggestion from the Sharp folks worked. We left the unit unplugged overnight to reset the electronics (and of course all the station presets, etc.) now, we have it happening again and all 5 drawers are out. the "read TOC" then report "no disk". i will try the lens cleaner but if that doesn't work, we will take it to a repair shop. our unit is actually almost 3 years old so it is past the extended two year warranty, but still it is too soon for it to be acting up. i hate cheaply made stuff like this! good luck.

You need Audio/Video Cables. Connect one end at TV Audio Out and other end to Amplifiers's Line In. It will work. I am sharing manuals for your help. Quick-Start-Guide-58Q7330.pdf (sharptvusa.com) User manual Harman Kardon AVR 146 (English - 60 pages)

I am uncertain how to present this to you. Press the ALARM ON/OFF button to turn off the alarm. If you want to turn on the alarm again, press the ALARM ON/OFF button once more. Detailed instructions regarding the controls can be found in a manual I think available at the following location: Sharp Alarm Clock Manuals and User Guides PDF Preview and Download (all-guidesbox.com) I don't have a guide to the internals of this clock but here is a tear down of a similar model if you are game to explore the workings. You could go through that and maybe get an idea of how the systems work together. If you are unable to fix the problem, you will find the contact details for Sharp support in the manual. Here is the tear down link: SHARP spc800 alarm clock Teardown - iFixit

Less than 12 months old so under warranty. Take it back for a free replacement.

sharper image su502 world time clock/radio To set the time: Make sure the 'power' is OFF by depressing the PWR button Depress MODE to start the setup and depress that key to accept each setting

The SPC900 has 2 alarms. On the back of the unit there is a buttion labeled "Alarm On/Off". Press the that button to cycle through the alarm on/off possibilties. On the screen you will see what alarm(s) is (are) turned on. There are4 possible settings: off (no alarms displayed), alarm 1 only, alarm 2 only or both alarms. The indicators are just above the seconds display and to the right of the big hour/minute display.