20 Most Recent Sharp Multi-System Mini Component System Shelf System - Page 5 Questions & Answers

0helpful
1answer

Unit will not turn off when OFF button is pushed.

I followed the instruction on how to reset the computer components, but the unit keep flashing Normal, Bypass and Phantom. The clock was flashing, so I resent the clock, and the flashing back and forth stopped. I just tried it again to be sure it was still working properly and it is!
1/29/2009 3:23:44 PM • Sharp... • Answered on Jan 29, 2009
0helpful
1answer

Says Protect on the screen when i plug it in

Most likely cause could be a blown power amp IC. The part number is STK402-040.
9/6/2008 3:02:12 AM • Sharp... • Answered on Sep 06, 2008
0helpful
1answer

Cd stuck err 0306 message

Since the cds are stuck inside, you need to open the unit and remove them. There are four screws on the top cover. Remove them (2 on each side) and lift the cover. You should see the cds, remove them, then plug on the unit.
6/26/2008 6:28:01 AM • Sharp... • Answered on Jun 26, 2008
0helpful
1answer

Sharp mini system error code 20

The code CD20 means Tray error. The cd mechanism will have to be reset by a serviceman .
3/29/2008 9:38:32 AM • Sharp... • Answered on Mar 29, 2008
0helpful
1answer

POWER PROBLEM

Check for an open fuse in the power supply.
3/27/2008 10:52:38 PM • Sharp... • Answered on Mar 27, 2008
0helpful
1answer

My hifi

Most likely cause could be a blown power amp IC.
12/19/2007 1:00:51 AM • Sharp... • Answered on Dec 19, 2007
0helpful
1answer

Sharp cd player

Most likely cause could be a blown power amp IC.
12/19/2007 12:59:57 AM • Sharp... • Answered on Dec 19, 2007
0helpful
1answer

I need to find an instruction manual sharper image

sharper image su502 world time clock/radio To set the time: Make sure the 'power' is OFF by depressing the PWR button Depress MODE to start the setup and depress that key to accept each setting
12/29/2022 10:07:32 PM • Sharp Audio... • Answered on Dec 29, 2022
0helpful
1answer

Sharp RP-107 turntable not working

12/11/2022 1:23:41 PM • Sharp Audio... • Answered on Dec 11, 2022
0helpful
1answer

I have a sharp atomic clock model spc900 and the alarm goes off every night at midnight. I don't know how to stop it.

The SPC900 has 2 alarms. On the back of the unit there is a buttion labeled "Alarm On/Off". Press the that button to cycle through the alarm on/off possibilties. On the screen you will see what alarm(s) is (are) turned on. There are4 possible settings: off (no alarms displayed), alarm 1 only, alarm 2 only or both alarms. The indicators are just above the seconds display and to the right of the big hour/minute display.
5/30/2022 8:28:20 PM • Sharp Audio... • Answered on May 30, 2022
0helpful
1answer

My Sharp CD-BH950 mini component system will not change tracks on CD's. Have tried all trays and multiple CD's with no luck. It just plays the first track over and over.

Look over your player and see if a program is set. Sometimes you can set a program on the CD player to play the first song on cds. Turn program play off. It’s sometimes called delete bank where all song are skipped except first track. Or you can have the repeat button on. Turn that off. There also could be a malfunction with the player. If your still having problems reset the system.
3/22/2022 6:26:44 AM • Sharp Audio... • Answered on Mar 22, 2022
0helpful
1answer

My sharp 3 disc rotary won't play past the first track on any disc

Sounds like the laser is stuck and cannot move because the slide motor has failed.
3/15/2022 2:23:55 PM • Sharp Audio... • Answered on Mar 15, 2022
0helpful
1answer

Sharp model GX-CD 610 GY has error 000 what does error 000 mean

The basic binary errors are usually something small. 0000 is usually a cleaning error. I would try to clean the lens with the recommended cleaner and then try again. If problem persists the lens may be saying its dirty due to a scratch on it. These are hard to diagnose because it's a process to remove. I would clean it then replace the lens if needed.
2/23/2022 4:37:02 PM • Sharp Audio... • Answered on Feb 23, 2022
0helpful
1answer

I have a Sharp CD-DH950P.. For all 5 trays I get the cannot read signal. I tried a CD disk cleaner and I get the same message.

Possible laser failure. Could be dust on the lens ... CD cleaners do more harm than good and are sold because people want them.
12/15/2021 3:23:10 PM • Sharp Audio... • Answered on Dec 15, 2021
Not finding what you are looking for?
Sharp Multi-System Mini Component System Shelf System Logo

132 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

 Grubhead
Grubhead

Level 3 Expert

5750 Answers

Gary
Gary

Level 2 Expert

126 Answers

Are you a Sharp Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Audio Players & Recorders

  • Sharp Audio Players & Recorders

Most Popular Question

sharp bh950 some reason come used work

  • Audio Players & Recorders
Loading...