Sharp XL-HP505 CD Shelf System - Answered Questions & Fixed issues
Hi, do you know if
The manual mentions a couple of things that could account for excess bass, one being the Extra Bass button (X-Bass indicated on front); the other being the ROCK setting, which boosts bass.
http://www.retrevo.com/support/Sharp-XL-HP505-manual/id/285dj790/t/2/
Placement of the speakers relative to the room surfaces and the listening position can affect their perceived bass response. Experiment. Corners and close wall reinforce the bass, moving the speakers out from them would lessen it.
Sharp XL-HP505 CD players won't open.
Hi,
I don't know what the code is but have you pushed the reset button. If you do push it you will have to reprogram the unit. Otherwise it will have to go in for service
Hope this helps
Kurt
Sharp XL-HP505 Not playing CDs
Hi try this.....
Put the system in standby (ie off but plugged
in) then whilst pressing down the record button and the X-BASS/DEMO
button, press the PRESET DOWN (i.e.left hand one) button until "CLEAR
ALL" appears, then power on your system.
This gave me some functionality back i.e. i can play normal wave CD's but not mp3 ones....
Hope this helps
"NO DISC" reading
Try this CD realignment process built into the Sharp XL HP505: Have unit off.
Hol down the square (stop) button and the X-BASS button while pressing the ON button. This starts the CD TEST. press play, the memory, then memory, memory, memory, adjustment lights will come on the screen. FOF, TOF, TBAL, TGAN, FGAN, RFLS. press cd1 - track 4, press cd2 - track 9, press cd3 - track 15. Press square (Stop).
If all the cd trays are full, then will light up . This worked for me.
I need to find an instruction manual sharper image
sharper image su502 world time clock/radio
To set the time:
Make sure the 'power' is OFF by depressing the PWR button
Depress MODE to start the setup and depress that key to accept each setting
12/29/2022 10:07:32 PM •
Sharp Audio...
•
Answered
on Dec 29, 2022
•
387 views
Sharp model GX-CD 610 GY has error 000 what does error 000 mean
The basic binary errors are usually something small. 0000 is usually a cleaning error. I would try to clean the lens with the recommended cleaner and then try again. If problem persists the lens may be saying its dirty due to a scratch on it. These are hard to diagnose because it's a process to remove. I would clean it then replace the lens if needed.
2/23/2022 4:37:02 PM •
Sharp Audio...
•
Answered
on Feb 23, 2022
•
140 views
Not finding what you are looking for?