20 Most Recent Curtis DVD1041 Player - Page 11 Questions & Answers

Check its back-light inverter baord. It is faulty. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/

Use the switch on the front to turn it on and off

yes

Sounds like the main power regulator board [SMPS] is faulty. Contact the authorized service center for Curtis. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/

Main board fault. Replace it. Contact any service technician. Gopakumar Gopalan Google

0126 0143 0154 0169 0190. Try these codes. .If you wish to get more; check the site linked here. It have set-up code list & set-up procedure to many popular brand remote controls.See it in "Mosaic" view.It will make surf easier. http://electrohelponline.blogspot.com/

Hello, Try a soft reset, unplug the TV from the AC outlet then reconnect, then power the TV on. You should get some kind of a start up menu. If you don't then make sure you're DVD is operating normally there might be something wrong with the disc player and that is why it is reverting to disc pick up or disc load.

This is probably a power source problem , This board here http://www.tvtechparts.com/FSP205-4LE03-p/fsp205-4le03.htm