20 Most Recent Fujitsu Plasmavision 42" TV - Page 5 Questions & Answers

A user manual is available from this link:-
http://safemanuals.com/user-guide-instructions-owner-manual/FUJITSU/PLASMAVISION%20PDS4221-_E
Check for a hidden power switch under the lower left or right under corner of the screen, ensure it is ON (- not sure if this switch is fitted to your model, but it does exist on other Fujitsu models).
Fujitsu no longer support or manufacture plasma screen TVs - therefore no parts are available from them. [Fujitsu only serviced to board replacement level - very expensive].
The Fujitsu models (generally, after 4 or more years use) suffer from cracked solder joints on circuit boards (due thermal cycling stress).
See Fixya tips:-
"Fujitsu Plasma 42" random shutdown - continuous flashing red led".

Have the Power supply replaced in this model, it is nortorious for failure.

You probably have a bad Power Supply. There are usually 1 or 2 fuses on the P.S. board. You can check them with a cheap ohmmeter (make sure the TV is unplugged first!). If they are bad, you have a bad Power Supply. Don't bother replacing the fuses without finding out what caused them to blow, or else they will just blow again. Take the set to a qualified technician.

On the video selection you have to go to HDMI and not video 5

power supply is faulty.

Most likelly, you have to use BNC to RCA adaptors.

Ur main video backlight board is dead,must be replaced.

You have not fully identified the model number of your unit, but
this is most likely caused by the Main Power pcb.
For models P42HHxxxxx and P42HCxxxxx see Fujitsu Service Bulletin on this problem. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A competent service technician should be able to implement the service bulletin.

Try this site for free manual download:-
http://www.eserviceinfo.com/index.php?pagetogo=1&what=search2

Number of pixels 852 (H) x 480 (V)

Try this website for free download:-
http://www.retrevo.com/samples/Fujitsu-TV-manuals.html

Try this website for free download:-

http://www.retrevo.com/samples/Fujitsu-TV-manuals.html

for this you need to take that fans out and read on it some serials and then you can find on google and buy new one

Take it to a TV repair technician. It is either a cracked solder on the power supply board or requires a complete new power supply. No easy fix sorry.....

Black vertical line indicates horizontal deflection section not working. Change horizontal linearity coil the problem is fixed

Sure. Can you tell me how many times it blinks before each pause. Please do provide this information correctly as this will help in effective diagonosis of the problem.

Regards,
Sai.

Need to have the power supply checked by a qualified technician.