Cisco -Valet Wireless Router - Answered Questions & Fixed issues
Blinking lights
when the router looses connection, it is best to just leave it as it tries to reconnect automatically
the blinking lights is the communication process and when connection is made for each section the light stays full on
there should be a on/off button that you just press to restart the searching process or a reset button under a small hole that you use a paper clip to gently press to reset
remember that it is not always the router that looses the connection but the server that it is connecting to
7/10/2017 9:53:36 AM •
Cisco -Valet...
•
Answered
on Jul 10, 2017
•
258 views
What does it mean to Console into the router?
Normally means communicating with the router via a cable attached to a port on the router normally labelled "console". This is the most basic form of communicating with the router for start up config. Usually a serial connection to a PC or laptop using something like Hyperterminal or PuTTY.
7/23/2014 10:41:09 AM •
Cisco -Valet...
•
Answered
on Jul 23, 2014
•
55 views
What does it mean to "console into the router."
Log in to the router. Open a browser and type in your Ip address to the router and the login password. (They should be on the label on bottom of router. )(NOT THE WIFI PASSWORD) once inside you can change the WiFi password.
7/22/2014 3:22:07 PM •
Cisco -Valet...
•
Answered
on Jul 22, 2014
•
89 views
Wirless isn't picking up on device
i dont get your problem, but if you want to access the desktop of the other device, you need to enable remote desktop.however,if you want to access the drive of the other device,you need to configure a mapped network drive.
11/7/2013 5:02:11 PM •
Cisco -Valet...
•
Answered
on Nov 07, 2013
•
58 views
How do I retrive my password
HelloAfter connecting internet, try google, type in the ID number into the address bar of your browser and clck "Enter" button on the keyboard to set the router settings. ID will be somewhat 122.245.2.34 or like format. Get you ID from your service provider; and follow. Your ID will be different to this, but look like this. OK.
2/13/2012 5:42:22 AM •
Cisco -Valet...
•
Answered
on Feb 13, 2012
•
103 views
I can not get the router to power on I plug it in
This can be due to two issues hardware or firmware.
1) Hardware :- try to access the router console if you are unable to access console than you have to take it to the company for repair.
2) Firmware :- try to access the router console and if you are able to access console try to upgrade the firmware of your router you can download compatible firmware from internet. Usually such issue with wireless router is because of firmware corrupt.
7/3/2011 5:49:32 PM •
Cisco -Valet...
•
Answered
on Jul 03, 2011
•
101 views
I need my security code
Hi,
Welcome to Fixya. If you need you Security Key or Password (Network Key) on your router you need to access the Wireless Settings Page. To access the router page you need a working computer that is connected to the router. To access the router page just open a browser then type 192.168.1.1, the Default username is admin and the password is admin. Go to the Wireless Settings and you'll find the Network Key or Passphrase (Security Code). You can alsoThen Personalize you Network Key or Passphrase so that you can easily remember it.
Thanks for using Fixya.
2/25/2011 6:32:05 PM •
Cisco -Valet...
•
Answered
on Feb 25, 2011
•
452 views
Cisco Router Customer Care Phone'@#[+1^84433O*233O-] numbeR USA
Warning SCAM - DO NOT CALL THESE NUMBERS. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website
Not finding what you are looking for?