20 Most Recent
Cisco -Valet Wireless Router - Page 3 Questions & Answers
Basic computer knowledge
I think you could go directly to Windows XP as it will be a bit more up to date. What you need to do is never lose patience, get yourself started with a book to learn the basics and practise a lot.
Never be scared if the computer stops working as you can always reload everything on it. That will be the best way to learn, by find it problems and then finding a solution to them.
How many VLANs are supported by a Cisco 1921 router?
There are 2 ways that the 1921 can support vlans.
If you purchase a 4 or 8 port switch module (EHWIC-4ESG or EHWIC-D-8ESG) for the 1921, the switch module can support 16 vlans.
The other option is set up one of the routed ports with sub-interfaces (one sub-interface per vlan) and attach the port to a trunk port on a switch.
You can create up to 1200 sub-interfaces on the 1900 (although I doubt you'd need that many without maxing the performance specs of the router)
Active call disconnected when another caller leaves a voicemail
Many things could be an issue, without being at the desk it would be hard to tell. First check your ports on MWI and VM. You may also use unity connection's port configuration test and check unity connections server for updates/upgrades have you tried turning MWI off and having someone call and leave a VM.
How to change password on Cisco router E3200
A Cisco E3200 has a default IP of 192.168.1.1
Make sure you are connected to the router through an ethernet cable if you dont know the current wifi password yet.
Enter that number into your browsers address bar exactly as I had shown. It will ask you for a username and password. Usually for the E3200, the default user and pass are both " admin ", so you should be able to log in rather quick.
From there you can find the security settings and change the password which will look like WPA Key or WPA2-PSK depending on personal preference.
You should choose WPA2-PSK, as its the strongest in terms of security and cannot be hacked easily.
More Information on the E3200:
Linksys Official Support Linksys E3200 High Performance Dual Band Router...
How do I reset PW and username for Linksys, Cisco WRT 7160 router
To factory reset a router, there should be a reset button on the back of the unit near the power button. Usually you can press and hold this with a pen or pencil (or bent paperclip point) while the unit is plugged in, then unplug the router while holding the reset button down and power it back on. Do this for about 5-10 seconds and it should return it to factory spec.
Not finding what you are looking for?