20 Most Recent Behringer PMP1680S Europower 10-Channel Powered Mixer (1600 Watts) Questions & Answers

0 Answers

When turned on, lights only blinked. Why nothing further?

Behringer... | Posted on Dec 28, 2015 | Be the first to answer

1 Answer

Last night my desk all of a suddenly started clipping in the mic imputs

I would suspect the power supply.

Behringer... | Answered on Apr 08, 2015

1 Answer

Why do i lose connectivity on left channel of amp on start

Sounds like a power phase issue.

Behringer... | Answered on Dec 23, 2014

0 Answers

What caused my Behringer power mixer main output no sound please advice?

Behringer... | Posted on Jun 26, 2014 | Be the first to answer

1 Answer

Bridge amp

Hello,

With this type of mixers i highly recommend to change the whole power amp module in order to avoid later distasteful and strange mixer behavior, hope it helps.

Behringer... | Answered on Nov 06, 2013

1 Answer

Unit will not power up fuse is good

Hello,

Output section unfortunately went out, this is why it does not turn on as the power supply is a switch mode type and detects some issue in the amp module and this is why it refuses to turn on.

Behringer... | Answered on Nov 05, 2013

0 Answers

Behringer pmp 1680 right side not working

Behringer... | Posted on Mar 31, 2013 | Be the first to answer

0 Answers

Europower mixer PMH8805 has 3 low impedence mic plugs out need schematic

Behringer... | Posted on Sep 27, 2012 | Be the first to answer

1 Answer

Monitors not audible with Behringer 1680S

Assuming you're trying to power the monitors from this unit as well as the mains.....Confirm that the amp switch is in the middle position which splits the internal amps....one for main and one for monitors. Output A would power the monitors.... B would power the mains.

Behringer... | Answered on Aug 27, 2012

0 Answers

Just got TWO Behringer PMP 1680s mixers & the monitor channel seems louder than the mains channel on both mixers? I've tested both channels on both mixers on the same speakers & it's a

Behringer... | Posted on Jan 06, 2012 | Be the first to answer

1 Answer

I have a 1680S. How do I hook up my in-ear

DO NOT connect your in-ear monitors to the power amp out using the MAIN/Mon speaker option as it would be goodbye hearing and fried ear buds..
Get a very small and in-expensive headphone amp and connect its input to the 1/4 inch Monitor output jack.

Behringer... | Answered on Dec 31, 2010

1 Answer

My Behringer 1202fx mixer works perfect for about an hour, then a hiss starts, eventually getting louder, till sound then gets intermittent. I turn off. Feels hot on side of mixer. What to do next?

I am guessing that the parts inside of your mixer are starting to wear out and your mixer is starting to die on you and you should buy a new one and the motor could be going bad too.

Behringer Music | Answered on Feb 23, 2021

1 Answer

K450FX. Why does second channel have low signal output?

There is a problem with the internal circuitry. There may be one of more components that have failed or weakened.

Behringer Music | Answered on Jan 06, 2021

1 Answer

Behringer Europort EPA300 having issue: no lights in Effects/ Bass/Pan/Level/Trebel area of unit,controls no longer work. Not getting full sound.System used for karaoke or to play music outdoors.

$95 an hour! seriously i don't know why more people haven't tried this, i work two shifts, 2 hours in the day and 2 in the evening...and whats awesome is im working from home so i get more time with my kids. heres where i went Copy Here........EARN75.com

Behringer Music | Answered on Dec 24, 2020

0 Answers

Europort EPA300. Why is there no panel illumination in Effects/Treble/Bass Level section and no control operation?

Behringer Music | Posted on Dec 22, 2020 | Be the first to answer

2 Answers

The fan in my Behringer Bass amp has broken. I don't have the amp with me but need to buy a replacement but I don't know the size.

Radio Shack may have the fans or can order it for you take the fan to a local Radio Shack store.

Behringer Music | Answered on Dec 14, 2020

1 Answer

Right output channel not working on main mixer

In order to help you we would need the make and model of the mixer.

Behringer Music | Answered on Apr 30, 2020

1 Answer

We have a Behringer X32 mixer and an S32 snake connected with a cat5 cable. I cannot get the two to connect. Do you have any suggestions?

Behringer recommends using a shielded CAT 5e cable with Ethercon connectors wired to the T568B standard to connect the two. Also you need to make sure that the board is completely powered on before turning on the S32 for proper connection. Make sure you are connecting between the Aes50A ports. When connected you should be able to see a green light next to Aes50A in the main screen. Then you will need to properly route the channels.

Behringer Music | Answered on Nov 13, 2019

1 Answer