20 Most Recent Logitech (980240-0403) Microphone - Page 3 Questions & Answers

just make sure that you are hocking up you mic in the right plugs int he back of the computer. just match the colors. you need also to go to the audio panel (it is called volume icon)and check in for mic and make sure that is not muted there. if you use the mic for msn for instance, you need to go to tools, audio and video options and just follow dircetions.good luck

Sounds like the mic is bad. The only way to confirm this is to plug a different mic into the computer and see if that works. If the second mic gives no sound then the computer may have an issue. Hope this helps.

15V DC 3A

fixya doesnt sell or manufacturer products -notify manufacturer --electronic shop or online search for assistance

Here's a helpful link: https://blog.jseaber.com/2010/02/27/logitech-z-2300-control-pod-disassembly/comment-page-3/

The Aux connection should work for either an iphone or android phone. That would be a good test to see if the speaker is still working. The top mounted iphone/ipod connecter can collect dirt and lint that will cause the proper connections to be made. Try cleaning these.

Here's a link to the manual. https://www.logitech.com/assets/35723/setup-installation-guide.pdf This is important: 3. A. If you have a PC and a: • 6, 7 or 8 channel (5.1, 6.1 or 7.1) sound card: Connect all 3 colored plugs from the audio input cable to the color-coded jacks on the sound card. 1. If jacks on your soundcard are not color coded, plug the audio input as follows: • green to front L/R (or #1) • black to rear L/R (or #2) • orange to center / sub (or #3) • 4-channel sound card: Connect the green plug from the audio input cable to your sound card's front jack and the black plug to your sound card's rear jack. Do not use the orange plug. • 2-channel sound card: Connect the green plug from the audio input cable to the "line out" jack on your sound card. Do not use the black or orange plugs.

If you try to open these speakers they will never work properly again. There are no screws. All the joints are stapled and glued.

What are you connecting speakers to?

What are you connecting the speakers to?

If its a speaker, YES.

This is for a fuse. DC volts - 1.5 amps. There should be a screw on cap that retains the fuse. These are common fuses and available at most electronic stores.

You can't. The control console is integrated into the system. This is a gaming speaker system meant to connect to a computer or game console.

What model Logitech speaker? What model iphone?

Hello I need to wiring order of this coupling.

s120-quick-start-guide.pdf - Logitech

https://www.logitech.com > assets > s120-quick-st... PDF S120 STEREO SPEAKERS. HAUT-PARLEURS ST?R?O S120. Complete Setup Guide ... www.logitech.com/support/S120. ADJUST THE VOLUME ... this manual.

• S120 Slim Lightweight Stereo Speakers - Logitech

  https://www.logitech.com > en-ca > products > s120-sli... This slim speaker design offers easy setup via any 3.5 mm input and access to all controls on the right speaker. 4.4 Watts Peak/2.2 Watts RMS power produces ... INTERNAL wiring https://www.google.com/search?q=Logitech+S120+transformer+wiring ....

https://www.elektroda.com/rtvforum/topic3093184.html and it looks like they were the only ones to take a crack at it. https://www.google.com/search?q=logitech+z323+connector+pinout Have you tried Logitech Support direct? ..

well doing that new GPU Card now has new GPU HDMIL sound channels so in sound setting change outputs to z323 not told you how the z323 wired to the PC. mine uses, FIBER optics. and never fails. the only way to lost LEFT size only is jacks not fully seated (baring hard failures , of the 323) mine is 900 series, and does fiber. (no hum fiber is king) yours has no such things. you are using RCA jack into the speaker right? NO PC told at all. mine has a custom soundcard, and can do it all, you name it, ALL. the problem is posting not tell at al what PC this is of endless vast. there are. desktops can do it all. laptops not. back of the sub has 2 RCA jacks aux input.both must be good and working back to the PC sound card. the sound card must be set up correcty and the silly (no GPU card told) card, must be output all turned off on hdmi. that is all I can do blind , I can not see what you own or what is connected or not. sorry

The sub woofer is active and should not be connected to amp.