20 Most Recent Logitech Harmony 880 LCD Remote Control Questions & Answers

your remote charges in a base, is the tv very old or new, if its under warranty check where you bought it, if its not, see if you can replace the batteries in the remote, they will get old and malfunction, they are probably small batteries like go in a heraring aid or computer, if there are several, one can go bad causing the others to go bad, clean the terminals on the pad and remote, use a pencil eraser, to clean them, sometimes they spill coke or just your hand can contaminate the conections.Matt

Logitech Harmony... • Answered on Oct 29, 2017

Try this support number: 1800 726 063 (Toll free)
Monday to Friday 11am - 11pm AEST Saturday & Sunday 11am - 8pm AEST
Hope that helps!

Logitech Harmony... • Answered on Jul 12, 2013

1) change the batterie with the same type and fully charged2) clean the contacts battery with c.cleaners3) retight the spring contacts battery with pliers, for a good contacts.v.iMPORTANTE4) PROOF 5) if doesnot resolve the problem6) open the r. control and clean the keypads swithc, for dust,etc, open contacts, or band contacs.7) otherwise you must go to the repair shop TVGod bless you

Logitech Harmony... • Answered on Aug 06, 2012

1) change the batteries with the same type and fully charged2) clean the contacts with contacts cleaner3) retight the springs contacts with pliers for GOOD contacts.very important.4) Proof5) if this does not resolve the problem6) open the remote control, and clean the keypads swithc. very well with contacts cleaners

Logitech Harmony... • Answered on Aug 06, 2012

Try the steps outlined in the link below. This might help find the cause of the issue.


Logitech Harmony... • Answered on Jul 14, 2012

I took the rubber feet off(4) from the underside of the cradle - removed the four screws and separated the top half of the cradle from the bottom. This exposes the two long thin charging arms and points All one piece). I then took some doubled sided tape, similar to what you use to put up temporary 3m picture hooks and cut four small pieces about 1/8th in square. Join two of the pieces back to back to make one piece (double original thickness), then raise one of the long charging arms gently and place the piece of double sided tape under the head of the arm (ie under the very end where the rounded point is, that sticks though the cradle when reassembled (there are two of these). Do this to the other arm.

Why - by inserting the doublesided tape you permanently raise the arms without bending them - ie they will now stay in that position and not bend out of shape, losing contact again . With the cradle reassembled, put the remote back in the cradle you will have more direct contact with the two charging pins. FIXED!!!!!!!! Good luck1

Logitech Harmony... • Answered on Jul 14, 2012

Begin the Setup ProcessStep 1: Create your Harmony LoginIf the Harmony remote web site is not automatically launched, go to the Harmony remote web site andcreate an account.Step 2: Complete the Online Setup ProcessOnce you have created your Harmony login, the online setup process begins. You will guided through aseries of question-and-answer steps to complete each of the five main steps of the online setup process:1. Identification: Requires you to create a login on our member web site.2. Check Connection: Ensures your computer and your Harmony remote are communicatingproperly.3. Set up Devices: Helps you set up a description of your personal home theater system.4. Set up Activities: Helps you set up a description of the connections for devices that allow you toperform Activities (e.g. Watch Television Activity).5. Update Remote: Updates your remote with your personal configuration.

Logitech Harmony... • Answered on Jul 10, 2012

Consult the owner manual--some if batteries removed for a few minutes all programmed units will be deleted but if that you will need to program other units back later.I would suggest if you do not have the manual to google the model number of the set or remote to try to locate one online for free.SD TECH

Logitech Harmony... • Answered on Apr 22, 2012

Hi. Unfortunately Logitech does not provide repair service for any products, so unless you are good at electronics and soldering this might not be an easy thing to fix. When my old Harmony 550 has button issues, I called Logitech about it and they gave me 50% off to upgrade the remote. This could be a good option for you.



Logitech Harmony... • Answered on Aug 30, 2011

Hi. You don't need the CD to install the Harmony software. It can be downloaded at http://logitech.com/myharmony.



Logitech Harmony... • Answered on Aug 27, 2011

If the buttons used to work then yeah it sounds like a hardware issue. You can go ahead and take the remote apart, but I don't think you will be able to fix it, unless you are good at soldering. Cleaning the contacts alone won't help. This same thing happened to the most used buttons on my Harmony One, and I just assigned the commands to the screen, so I could continue using the remote without those buttons.
If you want to try assigning the buttons to the screen, the steps in this article by Logitech will help:
I hope this helps.

Logitech Harmony... • Answered on Aug 17, 2011

Hi, this is a common issue with the Harmony 800 series. What I do, is use an elastic band to keep the remote firmly in place on the charger, so that it does not lose contact.
Hope it helps.

Logitech Harmony... • Answered on Aug 03, 2011

Try updating the firmware on the remote, as this solved most issues. To do this, log in to the software, click "Downloads" at the top of the screen then click "Firmware." Follow the on screen instructions to update your remote's firmware and configuration.

Logitech Harmony... • Answered on Jul 27, 2011

How long is the litium battery in this thing already?Like 2 years or more change the battery and reprogrammed the remote.

Logitech Harmony... • Answered on Jun 13, 2011

Between the battery and the 'door'.

Logitech Harmony... • Answered on Mar 08, 2011

Oh wow! Either delete all 4 devices online and reprogram it making sure to hit the "sync" function or whatever function is provided to complete the process online, or take it back to your dealer for clarification or refund.

Logitech Harmony... • Answered on Feb 21, 2011

If Logitech cannot assist you with this, you can pick up a replacement LCD screen for about $25 on Ebay. It is a very easy fix. The screen is connected to the logic board with a simple ribbon cable. The grey top of the ribbon cable connector is gently lifted up and off and then 4 pressure-fitted tabs are simply squeezed to lift the LCD panel off the board. Good Luck!

Logitech Harmony... • Answered on Jan 10, 2011

Not finding what you are looking for?
Logitech Harmony 880 LCD Remote Control Logo

214 questions posted

Ask a Question

Usually answered in minutes!

Top Logitech Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76582 Answers

Tom Chichester

Level 3 Expert

61695 Answers

Steve Pack
Steve Pack

Level 3 Expert

4342 Answers

Are you a Logitech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Logitech Televison & Video

  • Logitech Televison & Video

Most Popular Question

get replacement usb cable

  • Televison & Video