You need to have a decoder box from a over-the-air (DTV), cable or satellite provider that has an HDMI, "S" video, composite video, VGA or component video outputs to connect to the TV's input. The coaxial cable only plugs into the decoder box. Apparently your TV doesn't have a tuner for coaxial RF.

NEC PlasmaSync... | Answered on May 02, 2015

1 Answer

Is this just a monitor or is it a television as well?

This is a monitor only. You have had a tuner unit to get on-air stations. Electro help

NEC PlasmaSync... | Answered on Apr 06, 2015

1 Answer

No sound or picture on goodmans tv

I'm not sure if it's powering up from your question.

If the power is on, chances are someone hit the input button so it has no reception or it's on an obscure channel other than 3 or channel 4 in some cases.

I'd start by checking the inputs with the remote or the button on the TV itself.

If you can scrool through each input and let it sit on each for a few seconds you might find something...same as the channels making sure it's on channel 3.

If none of these work, you may need to take it in for servicing.

NEC PlasmaSync... | Answered on Feb 08, 2015

0 Answers

I have onida igo series colour tv but iam not abel to read scroling news due to screen adjustment problem how i can adjust

NEC PlasmaSync... | Posted on Jun 05, 2014 | Be the first to answer

0 Answers

Onida igo 21 1x3 service repair and circuit

red color not display in onida 21 black tv

NEC PlasmaSync... | Answered on Feb 28, 2014

0 Answers

I need a base pedestal stand for an Akai PDP42z5TA

NEC PlasmaSync... | Posted on Feb 08, 2014 | Be the first to answer

1 Answer

Vm2g remote needed

If you wish to buy a genuine remote control, contact the authorized service centre, or authorized dealer. If you wish to buy a universal remote control, you should first make sure about the number of digits in the set-up code, for the device you have. For example: some brand sets will have four digits in its set-up code, some of them will have three digits, and so on. There are devices that need even a single digit or 2 digit or 5 digit codes. Check how many digits code your device has to synchronize with. It is so easy to check, just enter any digit from your remote control, when the set asks for code. See, if you're entering Zeros, repeatedly, when the set asks code, and the set allows you to enter only 3 Zeros, means, the set-up code to your set should have Three Digits one.
Now visit the sites I've linked here. Both the sites have set-up code list, and set-up procedure to many popular brand remote controls. Check it, and find out which brand remote control have set-up codes to your device, and buy that one according to availability. Keep in mind; when you buy a universal remote control, it will have set-up code list, and set-up procedure along with its catalogue. Never accept a remote control, with out this document. See the sites by "Mosaic" view; which will make surf easy.
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/

NEC PlasmaSync... | Answered on Jan 22, 2014

1 Answer