Broksonic CTVG-5463GVC 19" TV - Answered Questions & Fixed issues

0helpful

14answers

General electric Universal remote control codes

i lost my code book for my ge remote control

Read full answer

11/11/2018 6:02:45 PM • Broksonic... • Answered on Nov 11, 2018 • 14,120 views

0helpful

1answer

How can i get an instruction manual for Broksonic CTVG-5463GVC 19" TV?

www.retrevo.com/ Try this link to download the manual for free. Electro help

Read full answer

8/15/2014 1:11:13 PM • Broksonic... • Answered on Aug 15, 2014 • 135 views

0helpful

1answer

What is the V-chip unlock code for Broksonic CTVG-5463GVC 19" TV?

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ V-Chip unlock procedure and codes to many popular brand TVs are given.

Read full answer

8/15/2014 1:09:44 PM • Broksonic... • Answered on Aug 15, 2014 • 92 views

0helpful

1answer

How to unlock channels for Broksonic CTVG-5463GVC 19" TV?

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Unlock procedure to many popular brand TVs are given.

Read full answer

8/15/2014 1:08:48 PM • Broksonic... • Answered on Aug 15, 2014 • 77 views

0helpful

1answer

Ge remote control codes for a SHARP tv

031,038,030,037. Try these codes.For more information http://electrohelponline.blogspot.com/Setup procedure, and setup code list to many popular remote controls are given.Pull up older posts.

Read full answer

12/10/2013 6:03:03 AM • Broksonic... • Answered on Dec 10, 2013 • 44 views

0helpful

1answer

Broksonic tv with dis remote 4.0

The Dish remote only has about 50 codes built into it---suspect it will not program to the brooksonic.......

Read full answer

10/30/2012 2:49:19 PM • Broksonic... • Answered on Oct 30, 2012 • 120 views

0helpful

1answer

Red blinking light

The TV is in protection mode. There is some shorted component/s on its main board. Contact any experienced service technician.

Read full answer

8/4/2012 4:13:11 PM • Broksonic... • Answered on Aug 04, 2012 • 81 views

0helpful

1answer

GENERAL ELECTRIC REMOTE 2150-V2 CODE FOR A SYLVANIA TV

Check these codes.0062 0004 0009 0135 0189 0183 0227 0456 0008 0068 0075 0141 0161004, 006, 008, 019, 062, 068, 069, 074, 075, 076, 077, 088, 116, 161, 183, 184

Read full answer

6/24/2012 4:27:17 PM • Broksonic... • Answered on Jun 24, 2012 • 195 views

0helpful

1answer

Block channels dont have password

Make a factory reset to this TV. Refer to its user manual for details.

Read full answer

5/19/2012 9:06:44 AM • Broksonic... • Answered on May 19, 2012 • 66 views

0helpful

1answer

I need the Dish Network code for the Remote for

Hey there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. Each of our different models of remotes have a few different codes that could work. I will list here for you the best codes for the more popular models of remotes that we have and the instructions for addressing the remote to the TV. I hope this information helps and if you have any further questions please let me know! Remote Model #'s Codes for TV3.0, 3.1, 3.2, 3.4 IR remotes - codes 720, 748, 752, 661.5.0, 5.2, 5.3, 5.4 IR remotes - codes 720, 748, 752, 656.4.0 and 4.4 IR/UHF remotes - codes 720, 748, 752, 721, 656.6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 720, 748, 752, 533, 656.20.0 IR and 21.0 IR/UHF remotes - codes 834, 899, 750, 748, 533, 622, 754.Instructions for addressing the remote to the TV

Turn the Television On.
Press and hold the TV mode button until all the mode lights light up red.
Enter the three-digit code using the buttons on the number pad.
Press the pound(#) button once. Note: The LED will flash three times.
Test functionality with the TV.
Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Read full answer

10/11/2011 9:30:11 PM • Broksonic... • Answered on Oct 11, 2011 • 424 views

0helpful

1answer

TV remote control code for Broksonic TV's

hi! i have here a couple of codes for your tv, just try them 1114, 1121, 1382, 1383, 1484, hope this helps! goodluck!!!!

Read full answer

6/6/2010 12:23:56 PM • Broksonic... • Answered on Jun 06, 2010 • 747 views

0helpful

1answer

Language selection

you must go into the menue and set up wich is gona be hard because you are in another language but good thing is setup usualy the first menue selection once the main menue comes up then you gota figure out witch one says english snd hit enter

Read full answer

5/6/2010 8:18:07 PM • Broksonic... • Answered on May 06, 2010 • 190 views

0helpful

1answer

Lost password for the V-CHIP on a Broksonic brand

http://safemanuals.com/user-guide-instructions-owner-manual/APEX/GB43HD09-_E try that :)

Read full answer

4/15/2010 4:30:42 AM • Broksonic... • Answered on Apr 15, 2010 • 207 views

0helpful

3answers

I need over-ride code for

Try these codes:

136 / 147/ 121 / 111/ 112/ 114/ 122/ 123/ 124/ 173 /

004/ 009/ 014/ 023/ 024/ 025/ 026/ 027/ 030/ 032/ 033/ 034/ 035/ 036/ 037/ 038 /

One of these codes should work.

Good luck and have a great day!

Read full answer

1/22/2010 7:58:35 PM • Broksonic... • Answered on Jan 22, 2010 • 287 views

0helpful

1answer

I'm having trouble programming my universal remote

I first need to know the brand of your tv or the model this would help me
out then i can tell you how to program your remote thanks

Read full answer

11/29/2009 8:47:07 PM • Broksonic... • Answered on Nov 29, 2009 • 162 views

0helpful

1answer

Digital chanels will not come through

have aq service tech come and check your digital tuner. first check and see if you are using that particular tuner. some tv's come with two types a digital and an analog tuner.

Read full answer

11/6/2009 8:00:06 PM • Broksonic... • Answered on Nov 06, 2009 • 86 views

0helpful

1answer

Have a remote g e and don t have the codes fore the t v

Hi

Universal remotes can use 3, 4 or even 5 digits in these codes. Ideally you need to specify the exact remote make and model of the remote for me to answer this question.

However - I have a number of 3 and 4 digit codes that are associated with Broksonic TVs.

If your remote uses 4 digit codes you will need to go through each of these until you get one that works.

Broksonic TVs commonly use these;

1114, 1121, 1382, 1383, 0147, 0135, 0250, 0257, 0310, 0394, 2053, 2072, 2284
These are the 3 digit codes
236, 463, 003, 180, 277.

Hope this helps. Please do rate my answer. Thanks.

Read full answer

9/7/2009 12:44:30 PM • Broksonic... • Answered on Sep 07, 2009 • 532 views

0helpful

1answer