Top 20
Broksonic CTVG-5463GVC 19" TV - Page 4 Questions & Answers
Tv change from air to cable
Have you tryed to go in to your TV menu and look for cable setup. Then change it to cable Not off air... Hope this was helpful.
6/2/2013 1:38:38 AM •
Broksonic...
•
66 views • 0 helpful votes
Need a code for a RCA Universal Remote on a Broksonic Flat Panel TV
If you have the code book just hold the device you want to set uplike tv, vcdr, etc. and the power button at the same time. The power botton will stay lit. Put in your 5 digit code...hold it till the tv,vcr turnsoff. Turn it back on and try the rest of the functions. If it dose not workon certain function just hold down that key till that function works. Hope this helps.
9/24/2012 5:39:39 PM •
Broksonic...
•
116 views • 1 helpful votes
How do I change my
go to the main menu and select on the screen untill you reach to the language selection then select english as you purpose
9/21/2011 8:16:12 PM •
Broksonic...
•
93 views • 1 helpful votes
Trying to connect HDMI
Only a LCD or a Plama tvs have the capabilities of the HDMI hubs to do the connections for the HDMI cable.Standard CRT tvs can't get HD signal or have the capabilities of the HDMI hubs for the HDMI cable to connected to it.
4/24/2011 2:54:15 AM •
Broksonic...
•
185 views • 0 helpful votes
Hola. No se si sirva
Hola, posiblemente el circuito integrado donde se realiza la seleccion de audio sea el problema y no el amplificador de audio ya que funciona con el DVD, habria que determinar cual IC realiza esta funcion tomando como referencia la salida demodulada de audio desde la etapa de frecuencia intermedia o adonde convergen todas las entradas de audio del TV.
2/26/2011 5:36:06 AM •
Broksonic...
•
329 views • 0 helpful votes
Need remote
Hi,
Kindly mention the model number so that i could provide the link to buy the remote?
Thanks and Regards
taran_2005
4/24/2011 3:13:22 AM •
Broksonic...
•
45 views • 0 helpful votes
Video does not work I
When you try to program what??? usually you connect the XBOX OUTPUT to the same INPUT on the TV (RF ch 4 or 3), (RCA) yellow, white, red connectors or the RGB connectors, and for some newer 360 boxes you have the HDMI connector, it has nothing to do with the COMCAST CABLE unit... it is just a matter of having the correct cable/connections and the correct input set on the TV...
Good luck!
2/28/2011 2:01:37 AM •
Broksonic...
•
128 views • 0 helpful votes
Just got tv 1st day
hi there, it seems your TV is not that complicated to remedy. Try to check the power cord for any cut or open wire. also check the internal fuse if still works. if it has a burn appearance try to replace it with same type and amperage. if still not works focus on the power supply section if some capacitor are bulgy or deformed. worst is that you have a defective power MOSFET. this must be service by a technician. hope this help good day. please rate and vote.
3/17/2011 1:55:07 AM •
Broksonic...
•
73 views • 0 helpful votes
We own a Broksonic combo
You can follow the below links to order for the Remote:
http://remotes.com/remotes/servlet/rs?a=gmi&smodel=076N0HH010&brand_pn=BROKSONIC_076N0HH010&mode=large&v=1&uuid=A12991846721771
https://www.encompassparts.com/webwiz/wwiz.asp?wwizmstr=WEB.SEE&partnumber=5930579
You can order for the Operating Manual from the following link:
http://www.encompassparts.com/products/?SC20145-OM
3/3/2011 8:23:34 PM •
Broksonic...
•
93 views • 0 helpful votes
Dvd keeps say incorrect disk,
are you using bootleg dvds?some players will not play them.if this is not the case maybe something is wrong with your dvd
10/11/2010 12:56:51 PM •
Broksonic...
•
109 views • 0 helpful votes
I have a 19 inch
Hi.
If the problem is restricted to two channels only, and the rest of the stations are working, then it can be a faulty tuner device. If you are using an external tuner box, test using a replacement tuner.
If you are using the built in tuner (aerial connected straight to coax socket at the back of TV), then the problem may be the internal tuner.
Before contacting repair or purchasing part, ensure that the problem is not low signal (bad reception). Video and audio digital signals are carried on different channels.
Test the TV performing a channel tuning and resetting to factory settings.
In some case the problem may also be caused by connection used. If for example the sound is carried from a receiver to the TV through RCA cables (red and white), you may have no sound from some digital channel. If the TV uses an external receiver box, test using different kinds of connection.
7/12/2010 3:32:29 PM •
Broksonic...
•
56 views • 0 helpful votes
Will not read DVD it says incorrect disc
Clean the dirty optical drive with one of those commerical DVD cleaning kits they sell at the box stores. Also, could be the DVD is region specific. Region 1 is USA meaning the DVDs will only play on Region 1 DVD players. You can buy region free DVD players on e-bay for cheap.
Theres a reason they call these DVD players Broksonic. Because they are always Brok. Spend a few dollars and get a name brand next time, because they last longer since those companies invest more in R&D and quality control.
1/31/2010 1:23:36 AM •
Broksonic...
•
248 views • 2 helpful votes
Not finding what you are looking for?