20 Most Recent RCA P52937 52" Rear Projection Television Questions & Answers

Check the lamp and its inverter. If lamp has failed, replace it along with it ballast [inverter]. It is the best practice. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Lamp replacement procedure to many brand projection TVs are given with illustrations. Never forget to reset the lamp time after replacement.

RCA P52937 52"... • Answered on Jul 30, 2014

sound like the high voltage is dead and needs repair.This unit has three projection bulbs and one HV transformer.The HV transformer is common to all three CTRs

RCA P52937 52"... • Answered on Oct 25, 2013

I am not sure what your needing but you can get the PTK195 Service manual which is what your set is from www.servicemanuals.vstore.ca by download within minutes of ordering.

RCA P52937 52"... • Answered on Jun 11, 2013

Sounds like it could be your bulb going bad I would check some places like rivervalleyelectronics.net or hdtvpartstore.com and see if they have your bulb is in stock it may not be to cheap but i beats buying a TV. I would direct you to the manufacturer but they probably have stopped supporting this type of tv.

RCA P52937 52"... • Answered on May 14, 2013

The beeping is usually caused by failed HOT Transistor and also possibly the flyback. You can get the Flyback and HOT repair kit from www.tvrepairworld.com

RCA P52937 52"... • Answered on Feb 06, 2013

Are you sure the model number listed here is the one on the back of your set? This older model listed here should not "beep". A lot of questions here get posted with wrong model number.

RCA P52937 52"... • Answered on Dec 23, 2012

I know the set well and would like to help---FIRST THING IS DISCONNECT THE POWER TO THE SET---a few minutes will be enough.Plug set back and a good chance it will have returned to normalIf not let me know and let me know if on the front of the cabinet it has the "GUIDE PLUS" LOGO.

RCA P52937 52"... • Answered on Dec 07, 2012

send a email request to [email protected] they should be able to provide those items.

RCA P52937 52"... • Answered on Jun 15, 2012

Common problem and RCA recommends the following to cure: replace R17520 with p/n# 218508, C11503 with p/n# 194903, and crystal.

RCA P52937 52"... • Answered on May 21, 2012

What you are describing can be due to a number of different settings.

Focus on the red and green guns
Sharpness on the red and green guns
Horizontal position and size
Vertical position and size.

Please consult a professional for adjustment on these items as they are all near or connect to parts that have Hazardous Voltage.

RCA P52937 52"... • Answered on May 13, 2012

If the issue is convergence off I can tell you what part/s are most commonly bad.

RCA P52937 52"... • Answered on May 04, 2012

Not finding what you are looking for?
RCA P52937 52" Rear Projection Television Logo

211 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76584 Answers

Cindy Wells

Level 3 Expert

6259 Answers

Paul Bade

Level 3 Expert

1688 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

rca home theatre premiere guide plus

  • Televison & Video