20 Most Recent RCA P52939 52" Rear Projection Television - Page 4 Questions & Answers

0helpful
1answer

Rca p52939

Does the Tv pick up a signal ? ( picture/sound ) If not, you may have a tuner problem as the screen will default to blue with no signal apparent. Could also be a cable problem. Hope this helps
Ed
NC Electronic
Mills, Wyoming
1/7/2008 12:55:59 AM • RCA P52939 52"... • Answered on Jan 07, 2008
0helpful
1answer

RCA big screen has gone crazy!

Sounds to me like you may have a cold solder joint in a board ( loose lead on the pc board ) or you might have a b ad eeprom causing the problem. You may need to replace the main board. Also another sitution I have come across is a stuck button on the tuning strip board ( the board/switches that change channels, volume etc ) on the tv. maybe also since the remote sensor is light senative, it may be in the line of the sun ( cover the ir senor on the front of the tv to illaminate that problem ). Good Luck and if you the suggestions don't correct the problem. email me at [email protected] or continue with this at this address. Good Luck
Ed
NC Electronic
Mills, Wyoming
1/7/2008 12:54:18 AM • RCA P52939 52"... • Answered on Jan 07, 2008
0helpful
1answer

RCA 52" Mdl P52939, PTK195S16B

but there are two
quick things you might be able to do. If it is a PTK195 you can most
likely install the updated power supply board. If you can solder and
know safety (like discharging caps) you can update the PS chip from an
STK730-??? to an STK730-180 (IIRC). I found that simply replacing the
chip with an equivalent fails most of the time. The 180s seem to hold
up.
12/19/2007 4:07:07 PM • RCA P52939 52"... • Answered on Dec 19, 2007
0helpful
1answer

TV WILL NOT TURN ON

there are two
quick things you might be able to do. If it is a PTK195 you can most
likely install the updated power supply board. If you can solder and
know safety (like discharging caps) you can update the PS chip from an
STK730-??? to an STK730-180 (IIRC). I found that simply replacing the
chip with an equivalent fails most of the time. The 180s seem to hold
up.
12/19/2007 4:06:12 PM • RCA P52939 52"... • Answered on Dec 19, 2007
0helpful
1answer

No raster

found this on a different forum
http://www.diybanter.com/archive/index.php/t-143488.html
but there are two
quick things you might be able to do. If it is a PTK195 you can most
likely install the updated power supply board. If you can solder and
know safety (like discharging caps) you can update the PS chip from an
STK730-??? to an STK730-180 (IIRC). I found that simply replacing the
chip with an equivalent fails most of the time. The 180s seem to hold
up.
12/19/2007 4:05:33 PM • RCA P52939 52"... • Answered on Dec 19, 2007
0helpful
1answer

Lines

are the lines multiple colors? ie; reg, green, blue? If so you need convergence repair, not really something a lay person can do.
11/29/2007 10:34:24 PM • RCA P52939 52"... • Answered on Nov 29, 2007
0helpful
1answer

RCA P52939 rear projection TV

Vertical sync is an IC function = shop repair = remove light box
and take it to a quality repair facility for an estimate = beware
of "Free Estimates" = pay for diagnosis, get it in writing.Mainly,
I'm finding bad solder connects in this style chassis,sometimes
I work on two or three at a time in my small repair shop........T.

Please rate this solution........................
11/23/2007 9:36:03 PM • RCA P52939 52"... • Answered on Nov 23, 2007
0helpful
1answer

Please Help!

A chirping sound from a TV set is the switch mode power supply trying to start up, but gets shut down because of a major short inside the set or in one of the circuits.. Most likly in this set, the horizontal output transistor is shorted because of a defective flyback transformer. Thats whats the common problem is with this set. A repair like this, if this is the only parts that are bad, will run you about 300 to 400 bucks or so. In some cases, not many but a few times, I have seen poor solder connections on L401 cause the horizontal output transistor to go bad. There are no user replacable parts inside this set, so please play it safe and seek out a pro to assist you in this repair. Good luck PS Please do not forget to rate this thread.
11/19/2007 2:19:50 AM • RCA P52939 52"... • Answered on Nov 19, 2007
0helpful
1answer

RCA P52939 projection TV

Yes you are correct, no days these TV sets have an automatic vertical hoild, and no I am sorry to say, there is no adjustment for you to make. there is a problem in the PIcture in picture circuit if there is one or the sync sepaqrator circuit has a problem. most likely a bad capacitor or a bad diode. This is a solid state set and there are no user replaceable parts inside them unless you know how the circuits work and can trouble shoot printed circuit boards. You are best to call in a pro to assist you in this repair. Good Luck
3/23/2007 8:15:07 PM • RCA P52939 52"... • Answered on Mar 23, 2007
0helpful
1answer

What is the resolution of a RCA SRS Rear Projection Television?

Television resolution, it will produce 1080i or 480p using the component input jacks. No way as sharp as 720p. This is of course dependent on your cable provider ..
12/2/2022 3:22:44 AM • RCA Televison &... • Answered on Dec 02, 2022
0helpful
1answer

Universal Remote codes for my crossly eye juke ?

There isn't one! Televisions, DVD and Set top boxes only. You buy a replacement Crossly remote from the maker. https://www.google.com/search?q=crossly+I+juke ..
11/28/2022 9:21:35 PM • RCA Televison &... • Answered on Nov 28, 2022
0helpful
1answer

What could be wrong with RCA LED55G65RQ with pilot light blinking red?

I assume "pilot light" is the standby light you're referring to. On most Funai brands including RCA, a continual flash of the standy light indicates inverter shutdown, pointing to bad LED backlights, new ones can be ordered from shopjimmy.com and you can install them yourself, no special tools are needed, however watch a couple youtube vids to see some tips on how to do it.
11/27/2022 3:29:51 AM • RCA Televison &... • Answered on Nov 27, 2022
0helpful
1answer

I have an Ilive DVD/CD player. With no remote so I purchased a RCA rcr804bfdr/rcr804br series 4 in 1 universal remote control. I need the code to program this device.

RCA remote control have no set-up code to Ilive brand devices. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.
11/23/2022 6:33:53 AM • RCA Televison &... • Answered on Nov 23, 2022
0helpful
1answer

How to program a RCA 26211 remote to a element DVD player

If you have an RCA 26211 remote, you can program it to control a DVD player by following these steps: 1. Press and hold the "Setup" button on the remote until the red light on the remote blinks twice. 2. Enter the code "9-9-1" on the remote. The red light will blink twice. 3. Press and hold the "DVD" button on the remote. The red light will blink twice. 4. Enter the code for your DVD player on the remote. The code will be four digits long. 5. Press the "Power" button on the remote. The DVD player should turn on. You can find the code for your DVD player in the manual that came with the player, or you can look it up online.
11/21/2022 11:54:40 AM • RCA Televison &... • Answered on Nov 21, 2022
0helpful
1answer

RCA F19421 service menu please. I need to fix the tv's overscan.

RCA Service Menu Instructions In order to access the service menu on your RCA TV you will need to have a remote, if your remote is lost or damaged we recommend that you purchase a Replacement Remote before trying to access the service menu on your set. Method 1
  1. Press the INPUT button on the remote.
  2. Then press the 2, 5, 8, 0 buttons in quick succession.
Method 2
  1. Press the MENU button on the remote.
  2. Then press the 1, 1, 4, 7 buttons in quick succession.
Categories:
11/6/2022 8:57:24 PM • RCA Televison &... • Answered on Nov 06, 2022
0helpful
1answer

RCA TV Model #RTU6549-C where is the backlight fuse?

Of the thousands of models of TV's manufactured in the last 10 years with LED lighting there has never been a set with a fuse in the backlight section. Most likely the lamp strips are bad and need replacing
11/4/2022 12:44:46 AM • RCA Televison &... • Answered on Nov 04, 2022
0helpful
1answer

Need help connecting Bowfell bluetooth sound bar to Upstar 27 tv ?

Hi, bluetooth means that you'll be using a wireless connection. You'll need t set the soundbar bluetooth connection on by first turning on the bluetooth connection within your Upstart 27 tv. Once the tv connection is on then you'll need to activate the bluetooth device search from your Bowfell and search for your tv in order to pair the 2 devices. You might need to reference the soundbar manual to understand what unique buttons on your device to use to move forward with the strategies that I've listed above. Thank you.
11/1/2022 12:31:13 AM • RCA Televison &... • Answered on Nov 01, 2022
0helpful
1answer

I have a 52 inch rca that after moveing it up onefloorwont turn no green it worked downstairs

Is it a projection set without a model number I can only make a guess. If your using "component cables' on it, one of them isn't plugged all the way in or the cable broke while unplugging it, swap out the cble and let me know. Thanks Techman 57
10/25/2022 6:33:30 PM • RCA Televison &... • Answered on Oct 25, 2022
Not finding what you are looking for?
RCA P52939 52" Rear Projection Television Logo

Popular Tags

85 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Jaime Hernandez

Level 3 Expert

2351 Answers

Cindy Wells

Level 3 Expert

6559 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

rca home theater system

  • Televison & Video
Loading...