20 Most Recent RCA F27252GY 27" TV Questions & Answers


No that is not an adjustment issue it is a broadcast issue, the aspect ratio is not able to display on the TV properly.

RCA F27252GY 27"... | Answered on May 24, 2017


Alot of the older RCA chassis required you to press 00, 91, or 92 to get to the external video input.

RCA F27252GY 27"... | Answered on Jan 15, 2012


Hello
Check first whether mute function is ON or not. If it is ON, make it OFF. If mute is OFF and still there is no sound from your TV, connect it to any other audio output sources, like an external amplifier or so, by connecting TVs external audio out sockets at its back and see whether there is sound output form amp. If not, make sure that the audio processing section circuits inside your tV is fulty. If there is soudn from amp, and not from the TV, check the speaker of the TV. If it is ok, then audio output section circuit of your TV is faulty, and need repair. OK.

RCA F27252GY 27"... | Answered on Dec 29, 2011


To solve my problem I use an universal remote, but I have to press the number 00 and automaticaly I pass to Video mode... It doesn't work with the "input mode" on the universal remote...

RCA F27252GY 27"... | Answered on Sep 10, 2011


Try to adjust the picture adjustment at the menu setting and at the screen controller at the flyback.Thanks..

RCA F27252GY 27"... | Answered on Sep 04, 2011


I believe what you have is a solenoid that goes bad and is very famous for this especially RCA's . The little solenoid up by the power button on front of the tv is where it is located ,a lot of times you can tap on it and it will work if it is just stuck if it is dead than a tap wont do it. Get one at the appliance store or the tv shop thats honest and you can just wire it in yourself. You can wire around it but you better know what you are doing.
What happens is the little sound like a click when the tv comes on is the sound of the solenoid cliccking,Ive also seen people get it working without the solenoid (wire around it and use a outlet remote to turn off and on the tv. Good luck

RCA F27252GY 27"... | Answered on Mar 09, 2011


You will need to have the original remote or in this case an RCA universal remote with an input button on it! These are still available in the major discount houses. Thanks for asking and show a few hands of support.

RCA F27252GY 27"... | Answered on Feb 13, 2011


You can try channeling up or down to get to channel 99.Rca in the past has used this to get to the video input. If this does not work you can buy a universal remote. In most cases, after programming the universal remote the major functions such as channel select, volume control and input select will work.
I hope this helps.
Skyassoc

RCA F27252GY 27"... | Answered on Dec 12, 2010


This is the regulator IC for many RCA/GE sets.

You looking for it or what?

Usually if it is bad, set is dead and if you look from the bottom you may find a short from the last two pins which are apart from the rest of the pins.

If you are looking for the part only----On Ebay select advanced search, then search by seller---select: sewsales55 which is Suburban Electronics; they will have it or the one that now subs for it.

I still carry several although I do not see many of those sets now.

If this information helps you, rate this solution as very helpful as I do this here for free.

If you have questions: comment here and I will assist you.

REGARDS, SD TECH

RCA F27252GY 27"... | Answered on Aug 15, 2010


I believe that channel 00 switches the set to the A/V inputs on the rear panel. You may have a bad cable or loose connection. Make sure the RCA plugs are firmly in the jacks at both ends.

The trouble may also be in the VCR. Sound but no picture is often a symptom of dirty heads. Try using a wet-type cleaning cassette and see if that brings the picture back. Wet-type cleaners come with a bottle of cleaning fluid which you apply to the strip inside. It's much more effective than dry type cleaners.

RCA F27252GY 27"... | Answered on Mar 21, 2010

Not finding what you are looking for?
RCA F27252GY 27" TV Logo

32 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

picture tv good but dont sound

  • Televison & Video
Loading...