Top 20 Bush DVD142RC 14 in. TV/DVD Combo - Page 2 Questions & Answers

When selecting a country, chose Australia not the UK as Australia broadcast in VHF, whereas the UK do not. Then hit the search button and it should pick up the 4 Irish channels, no problem.

Try these codes http://www.dvddemystifiziert.de/codefree_en/bush.html
If none of them work then sorry, you can't use it to view the disk.

Hi.

If you are using a replacement remote, or a programmable remote, then the remote needs to be programmed correctly for the DVD. You will need to use auto-program.

If instead you are using the original remote, then either the remote is malfunctioning, or more likely there is a problem with the DVD IR sensor, that is separate from the TV one.

There are method of cleaning that can and will take care of most of these problems, what happens over extended use the DVD player lens gets debris and dust on it, Thus you might need to go out to a best buy or radio shack as for a dvd cleaning disc and what you do is load that and it will clean the laser on it.

Now if this does not help in any way then the unit may need to be repaired. But lets not put the wagon in front of the horse just yet.

Thanks I hope this solutions does work please do click the accept button for my efforts. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

HAve you a manual for it as I have not got a manual. Do you know if I can get one or download one..I do not know how to play video

try to use auto search :)

If the set does not have a DVD in it when it is powered up, it should come up in TV mode by default, otherwise, it needs to be repaired.

try pressing plus and minus channel on the tv at the same time. works with my daughters tv

Press menu button then press 7935, if like me you bought a display model it will be set to hotel mode, this hides all the menus, once accessed switch hotel mode off, job done x

HI,. this is a lens assembly fault. the lens is malfunctioning or, it may have stopped reading. this wrong disc code is just a universal warning that is concerning a fault if the main board doesn't receive any data(audio,video) when the disc is inserted.

Due to the integrated status of your unit, this will be a costly repair because, the entire assembly is combined together with the vcr section as well.

You will need to replace the entire assembly to fix this issue. the lens has burned out.

you can confirm my diagnosis by preforming a cleaning of the lens with a cleaning disc. if the unit continues to not read or play a CD after the cleaning, this will confirm my diagnosis.

Please rate and have a great day:)

press the AV buton which is on remote control & tv

www.tv.manualsonline.com
or
www.bush.user-manuals.com

Did you check the casing for a reset button (sometime it an itty ***** hole)
Hope this helps
Trap

download available at safemanuals.com (diplodocs)

verify in the setup menu of your dvd ie put no disc in and go to setup check to see if there is a region setting in there and that it has not been switched

It could be not inputing any number on the timer. Or sometimes hitting the button many times until you get it to zero setting. Or sometimes, the cheat of not setting the time clock of the tv.

I'm looking too, but no luck yet. I'll let you know if I succeed.

Persevered til we got the correct tuning

No it is not worthy, you will spend around $100, but brand new combo 13'' cost $80 and DVD starts from $22. You can use an external one.

Switch on t/v press TV / DVD button on remote to ensure it is in TV mode. Select DVD by pressing

AV button once or by using input select menu

Press TV /DVD button until DVD RC appears on top left (The remote is now set to DVD mode)

Insert disc ensuring label is to rear of set and Auto play function will start