20 Most Recent RCA F27442 27" TV Questions & Answers

0helpful
2answers

The TV is connected to cable but only shows snow.

Sounds like your "input source" is not set to cable.
12/1/2017 4:56:27 PM • RCA F27442 27"... • Answered on Dec 01, 2017
0answers
0helpful
1answer

On tv inputs, what does frnt mean

front
8/24/2016 10:21:08 PM • RCA F27442 27"... • Answered on Aug 24, 2016
0helpful
1answer

TV has no sound

Hello

You haven's specified nothing about the picture. Picture is Ok and there is no sound I thinks and posts this solution

Either your TVs speaker or its sound out put ic has damaged. To check it and conifrm you just do this first. There is a stero headphone socket on the front panel of your TV. Insert a headphone pin inot it and listen whether there is sound output come ffrom it or not. If there is sound output from the headphone socket, and not from the speaker, be sure taht the speaker is out.
If there is no sound output from the headphone socet, wither your TVs sound output ic is damaged or it doesn't get proper voltage to go on. It is very easy to locate this IC, as speaker wire goes directly to this section. Just follow the speaker wire and locate the IC, usually screwed on to a metal heatsink. Check its input voltage. If there is no voltage to that IC, check the track associated with that pin. If there is voltages and still not works. first resolder all the pins of that IC by applying a little more solder, whout shorting the adjecent terminals. If this does not helps, replace that IC with same type and number. OK.
11/7/2014 6:14:28 AM • RCA F27442 27"... • Answered on Nov 07, 2014
0answers
0answers
0answers
0answers
0answers
0helpful
1answer

Zenith tv is blurry

There are two adjustments on your flyback. If there is not an access in the back of the set to turn the adjustments then you need to take the back off of the tv. One adjustment is for brightness and the other is your focus. Just slowy turn the adjustment right or left until the picture gets clearer and your done.
3/20/2013 6:11:56 PM • RCA F27442 27"... • Answered on Mar 20, 2013
0helpful
1answer

Ario 42" hgtv I need the codes for my RCA universal 6 device rcu600dsn

Check these codes. 000/ 003/ 004/ 005/ 007/ 009/ 011/ 048/ 078/ 082/ 083/ 094/ 096/ 098/ 099/ 101/ 102/ 103/ 107/ 113/ 129/ 133/ 167/ 179/ 181/ 187/ 188/ 194 If you wish to get four digit or five digit codes, check this link.
2/20/2013 12:13:52 PM • RCA F27442 27"... • Answered on Feb 20, 2013
0helpful
1answer

No remote. how do i know what remote to buy ?

Setup codes for RCA brand TVs are given below. If you want more details and codes to various remote controls, check the sites given here. Just enter them, and see which one has setup codes to RCA brand TVs, and buy one according to availability. Check these sites.General setup codes to RCA TV are: 0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188
1/13/2013 12:32:50 PM • RCA F27442 27"... • Answered on Jan 13, 2013
0helpful
5answers

RCA TV f27422 TURN OFF THE GUIDE PLUS

Hello, I have had my TV for 3-4 years and have dealt with this stupid guide popping up for the last 2 when I got curious to see if it was something I wanted to use. FINALLY I came across a solution - so far so good but tomorrow it could be back? I did not have the option field some suggested to use. So saw another suggestion for something else and so far so good. When going into the setup guide. Select the USA, place all 0's in the zip code area and NO for everything else.... no VCR no cable, etc.
Hope this helps..
I also was able to do this without the remote - IF you can get the menu to pop up you just have to use the numbers to select what you need. Found the remote and saw nothing different as far as menu options. Good luck.
12/11/2012 5:35:10 PM • RCA F27442 27"... • Answered on Dec 11, 2012
0helpful
1answer

Did the 24c08 cause it

What is the problem you faces with this TV? Provide more details, please.
10/4/2012 1:37:22 PM • RCA F27442 27"... • Answered on Oct 04, 2012
0helpful
1answer

How do i enter the service mode on RCA F27442 TV

Check this link for more details.
9/30/2012 3:44:07 PM • RCA F27442 27"... • Answered on Sep 30, 2012
0helpful
2answers

Picture too low in screen

Picture too low in screen can be from a circuit inside the TV.These can be caused from among the components in it.Here is a sample image to describe it : Guide on How to find Vertical IC and these Vertical IC derives power from Flyback Transformer There is no manual adjustment for Vertical height, these requires servicing.( a component level troubleshooting )let us know if you need further assistance!
9/29/2012 1:47:56 PM • RCA F27442 27"... • Answered on Sep 29, 2012
Not finding what you are looking for?
RCA F27442 27" TV Logo

159 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6687 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

rca tv f27422 turn off guide plus

  • Televison & Video
Loading...