RCA F27450 27" TV - Page 8 - Answered Questions & Fixed issues


1- Manually turn ON your device (TV, VCR, Cable Box) 2- Press and "HOLD" CODE SEARCH 3- Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once. 4- Release CODE SEARCH. 5- Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second). 6- Once the device turns off, press and release ENTER. 7- With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

RCA Televison &... | Answered on Sep 29, 2019 | 44 views


You can connect through the video output of the VCR (Yellow/White/Red) into the TV input (Yellow/White/Red or some newer TVs have component input so you would use Green), or you can use the coaxial input and tune to channel 4 on the TV (make sure the VCR is switch to output 4).

RCA Televison &... | Answered on Sep 29, 2019 | 33 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
https://homenol.blogspot.com/
https://remotesearch.blogspot.com/
https://electronicshelponline.blogspot.com/
https://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. See the site by a desktop. Mobile view has no search box. If you are viewing it by your mobile, see it in webview]

RCA Televison &... | Answered on Sep 17, 2019 | 77 views


At first, you should make sure that the remote control you have, had a code for your TV brand. If yes, you can program that remote control to control your TV. Make sure it first. If there is no code said, you can't.
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
https://homenol.blogspot.com/
https://remotesearch.blogspot.com/
https://electronicshelponline.blogspot.com/
https://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. See the site by a desktop. Mobile view has no search box. If you are viewing it by your mobile, see it in webview]

RCA Televison &... | Answered on Sep 17, 2019 | 40 views


You can find the Owner's Manual and the Programming guide at the Voxx International Zendesk site for the antenna rotator: https://voxxintl.zendesk.com/hc/en-us/articles/225488908-Information-Owners-Manual-and-Support-for-the-RCA-VH126N-Antenna-Rotator . The Owner's Manual has the installation directions; the current link to the manual is http://www.voxxintl.com/search/?sku=VH126N&t=OM .

I hope this helps.

Cindy Wells

RCA Televison &... | Answered on Sep 13, 2019 | 47 views


Does anyone have a answer for this problem I'm going through the same thing here?

RCA Televison &... | Answered on Sep 12, 2019 | 1,391 views


Hi Yvonne, as you comment, there may be two reasons for failure, the internal RCA straps stretched and therefore fail to transmit the movement so that it works correctly and the other reason, the VHS tapes, which are wet
Observe through the two upper windows of the Video cassette, that the tape is without any white spots, if white spots appear, these are due to moisture and the tape with humidity, it cannot move correctly inside the video cassette, and can cause the fault what do you describe
Also verify that the drum of the video heads is clean and free of moisture
I hope you can watch your videos
Regards Franco Dosil

Hola Yvonne, por lo que comentas, puede haber dos motivos de falla, las correas internas del RCA estiradas y por lo tanto no logran trasmitir el movimiento para que fun cione correctamente y el otro motivo, las cintas VHS, que se encuentren humedas
Observa por las dos ventanas superiores del Video cassette, que la cinta se encuentre sin ninguna mancha blanca, si te aparecen manchas blancas, estas son por humedad y la cinta con humedad, no puede desplazarse correctamente dentro de la video cassettera, pudiendo producir la falla que describes
Verifica tambien que el tambor de los cabezales de video, se encuentre limpio y sin humedad
Espero puedas ver tus videos
Saludos Franco Dosil

RCA Televison &... | Answered on Sep 04, 2019 | 43 views


Hi Ernest, you can have a problem both on the Power Supply board, as well as on the Main Board
Hola Ernest, puedes tener problema tanto en la placa de Fuente de Alimentacion, como asi tambien en la Placa Principal

RCA Televison &... | Answered on Sep 03, 2019 | 63 views


Tienes que buscar el lista de c?digos y marcas para ver si el tuyo se encuentra y sigue los pasos

RCA Televison &... | Answered on Aug 19, 2019 | 83 views


The digital TV recorder shown is an ATSC (digital OTA) to NTSC (analog OTA) signal converter. It connects between an OTA antenna (RF, RG59/RG6 connector) and an older television or VCR/DVD recorder with a NTSC tuner. Some wired security cameras use a BNC connector to the security system receiver.

I wish that I had better news for you.

Cindy Wells

RCA Televison &... | Answered on Aug 19, 2019 | 57 views


Go into cable box settings , audio, select use closed caption

RCA Televison &... | Answered on Aug 18, 2019 | 68 views


How handy are you? If you are somewhat handy just order a digitizer assembly off eBay and replace it. It’s only a few small screws to remove and a couple of ribbon cables to unhook and reconnect to swap it out

RCA Televison &... | Answered on Aug 16, 2019 | 19 views


Sounds like a definite power supply issue, if you open the TV, there is likely a bulging capacitor on the power supply. Even if not a obvious capacitor problem, the Power board is likely the culprit.

I'd suggest trying to get the repair done outside of a electronic repair shop, they would likely charge upwards $400 for replacing the power supply in most TV

Can buy new one on many websites, or used on ebay.
at Shopjimmy.com you can search based on board #, and will give you list of compatible power boards, as well as a list of any other TV's that use the same power board, that will give you more options as far as finding a cheaper or even a used replacement to keep your costs to a minimum
make sure you buy based on the part # listed on the board, and not by the model number of your TV, as there are usually many sub-models that all have different interior parts, and most are not compatible with each other.

RCA Televison &... | Answered on Jul 23, 2019 | 218 views


Chances are you have backlight issues, I believe this set only has one strip down the middle of the TV with 13 lamps in it, if one is shorted it shuts down the power supply LED driver section, and I'm guessing this is what is happening

RCA Televison &... | Answered on Jul 07, 2019 | 228 views


Big difference. RCA is analog. HDMI is digital. When you convert the signal backwards you lose quality.

RCA Televison &... | Answered on Jun 30, 2019 | 42 views


Hi Eugene, I sent you the link to download the user manual for your RCA and follow the steps to program it
Hope this can help you
Greetings Franco Dosil

Hola Eugene, te env?o el link para que descargues el manual de usuario para tu RCA y sigas los pasos para programarlo
Espero que te sirva
Saludos Franco Dosil

http://www.fixya.com/answer/answerpageslideview.aspx?ctg=mine&fml=0&brd=0&thid=27690180#
http://www.specsserver.com/CACHE/FRUBOVYUEHOV.PDF

RCA Televison &... | Answered on Jun 22, 2019 | 39 views

Not finding what you are looking for?
RCA F27450 27" TV Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...