Top 20 RCA F27450 27" TV Questions & Answers


There should be access to the menu system from the panel controls. Either a menu button or pressing a combination of buttons for a certain period of time to access the menu.

RCA F27450 27"... | 149 views | 0 helpful votes


on your remote it will have a button for "format". set up the size you want

RCA F27450 27"... | 128 views | 0 helpful votes


Doubtful. That's long before digital broadcast was implemented. You will need an adapter box.

RCA F27450 27"... | 51 views | 0 helpful votes


if it turns off in the same amount of time every time, and can turn right back on, check your sleep settings... it is a feature that turns the tv off for you.

RCA F27450 27"... | 43 views | 0 helpful votes


Try by pressing "0, 0" by remote control. If it do not changes, there is no other way with select it by universal remote control.

RCA F27450 27"... | 205 views | 0 helpful votes


what model number?

RCA F27450 27"... | 25 views | 0 helpful votes


The width of the picture is less than normal. It can be adjusted by entering in to its service menu options. But, entering service menu options and adjusting data values there is a skilled task. It will be best to contact any expereinced service techinician ot do this. Or Visit the site named 'Electro-help' for more details. Check this link and select the site. View it in 'Flip card' option, which can be selected from the drop down box menu at the left top corner or the display window. It will make search easy. If you are confident that you can do this, just proceed. If not, do not tamper the TV.

RCA F27450 27"... | 48 views | 0 helpful votes


it is listed here as a 27 inch set--can you confirm the brand and model number for me ???

RCA F27450 27"... | 216 views | 0 helpful votes


FIRST GREEN LIGHT WOULD COME ON. TOOK IT AWHILE BUT ITWOULD FINALLY TURN ON...NO NOTHING. IT'S GETTING SPARK CAUSE WHEN I PLUG AND UNPLUG IT AT THE SOURCE OF ENERGY IT SPARKS. FUSE IS NOT BLOWN

RCA F27450 27"... | 163 views | 0 helpful votes


Hi,
The problem on your tv is the leaky electroltytic capacitor on the regulator section.
Replaced the capacitor on that area and your unit will be back to normal again.
If you don't have an experience in electronics find a qualified technician to do the job for you.
Have a nice day!
Thanks for using fixya.
JDVillanueva

RCA F27450 27"... | 147 views | 1 helpful votes


menu should have screen format options,,check ur manual also,,or rca website

RCA F27450 27"... | 54 views | 0 helpful votes


The codes for your tv are, 005,014,015,018,019,036,041,049,053,075,076,077,087,103,114,212,216,223,228,229,233,231,235,236,237,..turn tv on press and hold tv button till blinks,enter one of the numbers above,press power off, if tv turns off, that would be the code,..may have to repeat the steps with another number if not,...hope this helps...

RCA F27450 27"... | 82 views | 0 helpful votes


You did not mention which input you attached the RCA cables to. If it was component it would be one selection, if it was composite it would be another. If you do not have your operations manual you can find the manual at http://www.retrevo.com/samples/RCA-TV-manuals.html Download it and starting on page 7 look at the diagrams they show for hooking up the DVD. Inspect your hookup and make sure it is correct. If it is then follow the procedure they give for selecting the device. Using this manual you should be able to sort out your problems. This unit has quite a few inputs but they all should be available on the menu. I suspect that you are looking at the wrong one. Get the manual and look at the pages that I mentioned. Let me know if you need anymore help.

hardrocko

Thanks for using FixYa

RCA F27450 27"... | 102 views | 0 helpful votes


Sounds like you have a bad picture tube. It would not be worth replacing.

hardrocko

Thanks for using FixYa

RCA F27450 27"... | 89 views | 1 helpful votes


Check the main fuse and see if it is blown. It should be a 4 or 5 amp 125v fuse. Thanks for using fixya.

RCA F27450 27"... | 81 views | 0 helpful votes


I would check the set up menu of your cable,satellite receiver set top box, they usually have a format selection in the menu and it sounds like you want to set it for 4:3 ratio format, but just find that adjustment and play around with it until you get the picture to look as you want it.If you haven't allready also check your TVs menu for the same adjustments. Good luck and Merry Christmas!

RCA F27450 27"... | 102 views | 0 helpful votes


hi,
this is a coman problum.
this is a pin.amp scaction problum. it is not expancive pls.fix this problum with NR.tv.techincean esyly.

RCA F27450 27"... | 135 views | 0 helpful votes


These are the RGB inputs which connect in to give direct Red, Green, Blue inputs from one source to another, they will give a better quality of picture.

RCA F27450 27"... | 112 views | 0 helpful votes


yes. easy. you have a bad capacitor in vertical circuit. most common are the little red capaictors 2.2 microfarad. there is also a red capacitor 2.2 by the signal processor

RCA F27450 27"... | 106 views | 0 helpful votes


Tries 1-800-Factory remotes originals Website.
U get same as the original remote.

RCA F27450 27"... | 562 views | 0 helpful votes

Not finding what you are looking for?
RCA F27450 27" TV Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76455 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6199 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

sony rear

  • Televison & Video
Loading...