20 Most Recent RCA F27450 27" TV - Page 9 Questions & Answers


1- Manually turn ON your device (TV, VCR, Cable Box) 2- Press and "HOLD" CODE SEARCH 3- Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once. 4- Release CODE SEARCH. 5- Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second). 6- Once the device turns off, press and release ENTER. 7- With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

RCA Televison &... | Answered on Sep 29, 2019


You can connect through the video output of the VCR (Yellow/White/Red) into the TV input (Yellow/White/Red or some newer TVs have component input so you would use Green), or you can use the coaxial input and tune to channel 4 on the TV (make sure the VCR is switch to output 4).

RCA Televison &... | Answered on Sep 29, 2019


could be the power supply , check the ballast if the part is ok most likely is the power unit

RCA Televison &... | Answered on Sep 17, 2019


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
https://homenol.blogspot.com/
https://remotesearch.blogspot.com/
https://electronicshelponline.blogspot.com/
https://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. See the site by a desktop. Mobile view has no search box. If you are viewing it by your mobile, see it in webview]

RCA Televison &... | Answered on Sep 17, 2019


At first, you should make sure that the remote control you have, had a code for your TV brand. If yes, you can program that remote control to control your TV. Make sure it first. If there is no code said, you can't.
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
https://homenol.blogspot.com/
https://remotesearch.blogspot.com/
https://electronicshelponline.blogspot.com/
https://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. See the site by a desktop. Mobile view has no search box. If you are viewing it by your mobile, see it in webview]

RCA Televison &... | Answered on Sep 17, 2019


You can find the Owner's Manual and the Programming guide at the Voxx International Zendesk site for the antenna rotator: https://voxxintl.zendesk.com/hc/en-us/articles/225488908-Information-Owners-Manual-and-Support-for-the-RCA-VH126N-Antenna-Rotator . The Owner's Manual has the installation directions; the current link to the manual is http://www.voxxintl.com/search/?sku=VH126N&t=OM .

I hope this helps.

Cindy Wells

RCA Televison &... | Answered on Sep 13, 2019


Does anyone have a answer for this problem I'm going through the same thing here?

RCA Televison &... | Answered on Sep 12, 2019


Hi Yvonne, as you comment, there may be two reasons for failure, the internal RCA straps stretched and therefore fail to transmit the movement so that it works correctly and the other reason, the VHS tapes, which are wet
Observe through the two upper windows of the Video cassette, that the tape is without any white spots, if white spots appear, these are due to moisture and the tape with humidity, it cannot move correctly inside the video cassette, and can cause the fault what do you describe
Also verify that the drum of the video heads is clean and free of moisture
I hope you can watch your videos
Regards Franco Dosil

Hola Yvonne, por lo que comentas, puede haber dos motivos de falla, las correas internas del RCA estiradas y por lo tanto no logran trasmitir el movimiento para que fun cione correctamente y el otro motivo, las cintas VHS, que se encuentren humedas
Observa por las dos ventanas superiores del Video cassette, que la cinta se encuentre sin ninguna mancha blanca, si te aparecen manchas blancas, estas son por humedad y la cinta con humedad, no puede desplazarse correctamente dentro de la video cassettera, pudiendo producir la falla que describes
Verifica tambien que el tambor de los cabezales de video, se encuentre limpio y sin humedad
Espero puedas ver tus videos
Saludos Franco Dosil

RCA Televison &... | Answered on Sep 04, 2019


Hi Ernest, you can have a problem both on the Power Supply board, as well as on the Main Board
Hola Ernest, puedes tener problema tanto en la placa de Fuente de Alimentacion, como asi tambien en la Placa Principal

RCA Televison &... | Answered on Sep 03, 2019


Tienes que buscar el lista de c?digos y marcas para ver si el tuyo se encuentra y sigue los pasos

RCA Televison &... | Answered on Aug 19, 2019


The digital TV recorder shown is an ATSC (digital OTA) to NTSC (analog OTA) signal converter. It connects between an OTA antenna (RF, RG59/RG6 connector) and an older television or VCR/DVD recorder with a NTSC tuner. Some wired security cameras use a BNC connector to the security system receiver.

I wish that I had better news for you.

Cindy Wells

RCA Televison &... | Answered on Aug 19, 2019


Go into cable box settings , audio, select use closed caption

RCA Televison &... | Answered on Aug 18, 2019


How handy are you? If you are somewhat handy just order a digitizer assembly off eBay and replace it. It’s only a few small screws to remove and a couple of ribbon cables to unhook and reconnect to swap it out

RCA Televison &... | Answered on Aug 16, 2019


This is not true. The “service only” USB port can be used for watching movies, viewing photos or text documents. I was shocked to find a hidden menu that I cannot access using the provided rca remote control. I have old android box which I was using for its USB port and it just so happens that the “info” button opens up the secret menu. Once open I have to use the provided rca remote control to navigate. It actually reads more file types than a Sony tv that has USB port as a marketed feature. It made this RCA 39” RLDRD3956A worth the $189 CDN Walmart was selling it for.
To hell with these companies blocking out features so they can market them on more expensive TVs. Effff these crooks. Never believe the lies Specialistal.
3_16_2018_7_23_38_am.jpeg

RCA Televison &... | Answered on Jul 28, 2019

Not finding what you are looking for?
RCA F27450 27" TV Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76455 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6198 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

sony rear

  • Televison & Video
Loading...