20 Most Recent RCA F27450 27" TV - Page 2 Questions & Answers


I had a similar problem with my Phillips 42 in. LCD HD TV.

Here's the problem. The Power Supply Board. I opened my TV up(warranty was up of course) and found several bad capacitors. Phillips and several other companies were sold capacitors that although were highly rated failed within 5 years because of a lack of preservatives. All sorts of electronic equipment is now being effected due to these defective capacitors.
Solutions?
1. Take it in and have it fixed
2. Open it up, check the board for faulty capacitors(bulged or leaking) Buy a new Power supply board and install it.
3. Remove PSB, remove faulty capacitors and replace with compatible new ones.

Hope this helps

RCA F27450 27"... | Answered on Dec 09, 2010


menu should have screen format options,,check ur manual also,,or rca website

RCA F27450 27"... | Answered on Nov 03, 2010


The codes for your tv are, 005,014,015,018,019,036,041,049,053,075,076,077,087,103,114,212,216,223,228,229,233,231,235,236,237,..turn tv on press and hold tv button till blinks,enter one of the numbers above,press power off, if tv turns off, that would be the code,..may have to repeat the steps with another number if not,...hope this helps...

RCA F27450 27"... | Answered on Mar 15, 2010


You did not mention which input you attached the RCA cables to. If it was component it would be one selection, if it was composite it would be another. If you do not have your operations manual you can find the manual at http://www.retrevo.com/samples/RCA-TV-manuals.html Download it and starting on page 7 look at the diagrams they show for hooking up the DVD. Inspect your hookup and make sure it is correct. If it is then follow the procedure they give for selecting the device. Using this manual you should be able to sort out your problems. This unit has quite a few inputs but they all should be available on the menu. I suspect that you are looking at the wrong one. Get the manual and look at the pages that I mentioned. Let me know if you need anymore help.

hardrocko

Thanks for using FixYa

RCA F27450 27"... | Answered on Feb 27, 2010


Sounds like you have a bad picture tube. It would not be worth replacing.

hardrocko

Thanks for using FixYa

RCA F27450 27"... | Answered on Feb 27, 2010


Check the main fuse and see if it is blown. It should be a 4 or 5 amp 125v fuse. Thanks for using fixya.

RCA F27450 27"... | Answered on Jan 12, 2010


I would check the set up menu of your cable,satellite receiver set top box, they usually have a format selection in the menu and it sounds like you want to set it for 4:3 ratio format, but just find that adjustment and play around with it until you get the picture to look as you want it.If you haven't allready also check your TVs menu for the same adjustments. Good luck and Merry Christmas!

RCA F27450 27"... | Answered on Dec 25, 2009


hi,
this is a coman problum.
this is a pin.amp scaction problum. it is not expancive pls.fix this problum with NR.tv.techincean esyly.

RCA F27450 27"... | Answered on Nov 16, 2009


These are the RGB inputs which connect in to give direct Red, Green, Blue inputs from one source to another, they will give a better quality of picture.

RCA F27450 27"... | Answered on Nov 11, 2009


Tries 1-800-Factory remotes originals Website.
U get same as the original remote.

RCA F27450 27"... | Answered on Aug 17, 2009


  • Hi, thank you for visit fix ya.
Do you have problems with tact switch controls ( power, vol+,ch+...).
Located in the panel front tv.
Go to, for parts:
http://www.encompassparts.com/tritronics//
Replace all and you will repair your tv.
Thank you

RCA F27450 27"... | Answered on Jul 27, 2009


There is a problem in electrolytic capacitors, probably the 300V one in the primary section of the power supply.
You should measure if there is a stable 300 V available in the primairy section...

RCA F27450 27"... | Answered on Jul 07, 2009


well not good try to call factory see what they suggest okay i woul say take to repair shop they
can replace that eeprom or chip its goona cost little bit to fix that frustrating problem okay good luck shad

RCA F27450 27"... | Answered on May 03, 2009


this is a very old problem.
dont break that tv. the amplifier is not working.
change the audio amplifier IC in your tv
okay

RCA F27450 27"... | Answered on Apr 30, 2009

Not finding what you are looking for?
RCA F27450 27" TV Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76443 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6197 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

sony rear

  • Televison & Video
Loading...