20 Most Recent
Questions & Answers
My 52in big screen just started to get a blurry screen to it
If you wish to get some details; visit the site linked here. Pull up older posts.
faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts
RCA HD52W66 Projection TV will not come on but the light flashes on the front
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
If blinks continue without any pause, the main board is faulty.
My rca projection tv powers on then off what can it be
Many conditions can cause this...too many to be specific. A short on the circuit board, thermal protection opens when too much heat trips the fuse. A bad power supply, leaking tubes, dirt/dust collection on main board, etc.
How to fix led tv sound problem?
What is the problem you faces with its sound? Provide more details; please. did you checked all the sound settings.
Check the speaker/s first. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Viewing it in "Mosaic
" or "Magazine
" will make surf easy. Surf the site with patience. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box.
Murphy MT014600101B tv will not switch on and the
Flashes of this light are fault indications. From the number of flashes occurs at one time switch ON, you can get an idea about the faulty circuit stage inside it. Count this number carefully after switch ON power at one time, and if you wish to get more details check the site linked here. It has details about these blinking codes to many brand TVs.
Pull up previous posts or type in the brand name and
model number to of your set
, to its search box, and press 'Enter'
view it in Mosaic / Timeslide
If you forget your password, simultaneously press and hold the MENU/
OK button on the front panel and VOL- button on the remote for three
seconds. This resets the password and unlocks the TV.
Not finding what you are looking for?