20 Most Recent RCA B27TF680 27 in. TV/VCR/DVD Combo - Page 2 Questions & Answers

0helpful
1answer

Hi does the RCA F32649 Have Digatil Tuner?

Unfortunately no, I checked your manual as well and your RCA F34649 does not have a digital tuner.

I hope this solution is helpful. Please take a moment to rate this solution.
2/11/2009 10:31:07 AM • RCA B27TF680 27... • Answered on Feb 11, 2009
0helpful
2answers

Ant/cable hole on back of set looks broken

You are going have to soldered a new coax connector into the tuner, which is not an easy thing to do. It would be a lot easier just to replace the tuner. Check with Andrews Electronics, and get someone knowlegeable in electronics to help you with the soldering.
9/18/2008 3:47:04 PM • RCA B27TF680 27... • Answered on Sep 18, 2008
0helpful
1answer

DVD SETUP

hi try these Code For Model RCR450 (the closest i found) Code 1000/3160/2000 for RCA TV/VCR/DVD Code 1000/3408/2000 for RCA TV/VCR/DVD http://www.rca.com/customerservice good luck windman
4/20/2008 8:22:02 PM • RCA B27TF680 27... • Answered on Apr 20, 2008
0helpful
1answer

RCA TV VCR/VCR combo

(1). Go to dollar store buy 4in1 remote control has all codes for all tvs cost $5.00 also you can enter menu on front of tv press menu button on front of tv when menu comes up use your channel up and channel down for up&down menu -- use vol- & vol+ to change settings
1/27/2008 3:15:51 PM • RCA B27TF680 27... • Answered on Jan 27, 2008
0helpful
1answer

DVD player won't play new movies

Try this

1.While the previews are playing, press the Menu Button on your DVD player remote to access the DVD's Main Menu.
2.Go to Scene Selection and press your Enter or Ok button on your DVD player remote.
3.Highlight Scene 2 and press the Enter or Ok button. This will start the DVD in Scene 2.
4.Use your rewind or reverse button on your DVD player remote to rewind back to the beginning of Scene 1.

Walt Disney Home Entertainment Technical Support
1-800-723-4763, Monday's 9:30-7:30 and Tuesday through Friday 9:30-6:30 CST

Excerpt from email tech support Walt Disney
12/7/2007 11:10:58 PM • RCA B27TF680 27... • Answered on Dec 07, 2007
0helpful
1answer

RCA model f32649

Hi, Based on your post/description, it would appear that the TV tuner of the RCA is at fault. Chances are the the VHF Low is not working right but the VHF High is. This is an inshop repair probably requiring component replacement. You may want to confirm by checking your TV's setup in the menu, you should have Cable selected instead of Air or STd and do a Memory + (scan and add channels). If still a no go, then back to the tuner suspect. The VCR will not display any movie since it normally transmits in Channel 3 (which is VHF Low). If there are no other problem with the VCR then you might still be able to use it by connection it to the A/V inputs of the TV. If the VCR works in A/V mode, then perhaps you may want to save the repair expense of the RCA TV and use the tuner of the VCR to watch TV and switch channels. Post back should you need additional information. Good luck and kind regards.
11/22/2007 12:08:06 PM • RCA B27TF680 27... • Answered on Nov 22, 2007
0helpful
2answers

Playing DVD'S

If you sure that the system supports the disc's format.. And it play other only once... try to clean the CD lens.
10/23/2007 7:43:23 AM • RCA B27TF680 27... • Answered on Oct 23, 2007
0helpful
1answer

No VCR/DVD Picture or sound

Your unit may have been switched to Progressive Scan mode, which a normal analogue TV can't recognise. Check your VCR/DVD manual for instructions to change picture settings and set it back to PAL TV.
Failing that try a new 3 conductor lead from unit to TV.  Also unless you yourself were actually the one who accidentally unplugged the unit, it is just possible that whoever did has not (for whatever reason)disclosed to you the full detail of what actually happened to cause it to fail. If it was in fact dropped or fell, pulling on the AV leads they could have been rendered useless or the unit itself might have suffered a Gforce-shock causing component failure or circuit board fracture.
All the best with this one

Anthony
10/21/2007 8:02:00 PM • RCA B27TF680 27... • Answered on Oct 21, 2007
0helpful
1answer

No sound on two local channels?

Do you have the original remote? it will look like the one here:http://www.remotes.com/remotes/servlet/rs?a=gmi&smodel=B27TF680&brand_pn=RCA_B27TF680&mode=large&uid=11758883061400 If you do not have the original remote you will not be able to switch off the SAP setting, without it as there is a button that controls the sound. when this button is pressed you see where to turn off the SAP setting. Good Luck
4/6/2007 11:59:39 PM • RCA B27TF680 27... • Answered on Apr 06, 2007
0helpful
2answers

New Remote

Theres not alot you can do as most universal remotes, you cannot get into the menu to program the TV sets ot use any special audio functions. But this is an RCA universal so you should be able to get into the audio menu with it and change to nornmal audio. Also You should see if anybody you know has a RCA remote that may work for you That you can borrow to do this with
9/22/2006 6:53:52 PM • RCA B27TF680 27... • Answered on Sep 22, 2006
0helpful
1answer

Trouble conecting soundbar to Element HD LCD TV ELDFT404

Your TV's Component 1 and 2 (and the Composite 1 and 2) RCA ports are video and audio inputs. They do not connect to the sound bar audio input. Based on the image here, https://www.manualslib.com/manual/509607/Element-Eldft404.html?page=8#manual , your TV has a coaxial digital Audio Out. You need a converter to connect the TV to the sound bar. A coaxial to optical digital audio converter is here: https://www.amazon.com/C2G-40018-Coaxial-Converter-Compliant/dp/B0002J2MV4 . There are also many digital audio to analog converters available, https://www.amazon.com/DA-Converters/b?ie=UTF8&node=3224445011 . Some of these support both coaxial and optical digital audio to analog. Note: many of these do not come with the audio cables. You have to purchase them separately. I hope this helps. Cindy Wells
7/18/2021 9:28:05 PM • RCA Televison &... • Answered on Jul 18, 2021
0helpful
2answers

Can't get the timer light to go off on my RCA VCR

Other RCA VCRs have had problems with flashing timer lights. Those could be fixed with service from an electronics repair person if it doesn't stop even after being unplugged for a while. But, try leaving it unplugged for a few hours. If that doesn't work, the electronics repair might be the way to go, or get a different VCR on eBay or from the local thrift store for pretty cheap.
7/17/2021 3:38:28 PM • RCA Televison &... • Answered on Jul 17, 2021
0helpful
1answer

What cable do I need to connect rca model drc200n to my tv?

RCA stereo cables you need to connect rca model drc200n to your tv
7/3/2021 8:52:23 PM • RCA Televison &... • Answered on Jul 03, 2021
0helpful
1answer

Can I program a rca universal remote to rca converter box stb7766g1

Probly not since its not a tv. But search utube or pinterest
7/2/2021 3:37:42 AM • RCA Televison &... • Answered on Jul 02, 2021
0helpful
1answer

RCA TV with built in DVD player, without remote, where is the eject button?

The eject button is on the remote control only. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. All the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check these sites too. http://remotesearch.blogspot.com/ https://elektrotricks.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops; as well as online shops. Visit the sites by Desktop computer and type in the brand name of your device in the search box at the right column. It will help you find the remote you have to buy. Mobille view has no search box.
6/19/2021 1:52:00 PM • RCA Televison &... • Answered on Jun 19, 2021
0helpful
1answer

Where are the fuses in this model RCA television?

IF there is one, it will be hard soldered to the power supply board. https://www.fixya.com/support/r29790007-repairing_own_television ..
5/26/2021 1:36:35 AM • RCA Televison &... • Answered on May 26, 2021
0helpful
1answer

Model SLD40A45RQ smart TV. Why doesn't it stay on?

we could never figure it out but perhaps your local repair service can
4/30/2021 2:30:04 PM • RCA Televison &... • Answered on Apr 30, 2021
0helpful
1answer

Hi, I have a Zenith SB1327W TV and a RCA niteglo remote that I am trying to program. I don't know the product number for the remote, so I cannot find the manual online.

Programming procedure https://voxxintl.zendesk.com/hc/en-us/articles/225309147-Programming-the-RCA-RCU4GLW-Niteglo-Remote-Control Zenith Remote Codes Zenith Universal Remote Codes Zenith Universal Remotes Codes for all devices: 101, 142, 149, 177, 201, 224, 225, 229, 237, 153, 154, 172, 401, 460, 461, 498, 501, 502, 521 In reality, the days of Universal Remotes are over. People buy remotes SPECIFICALLY for the set you have from places like this. A direct copy aka, a facsimile copy. https://www.replacementremotes.com/zenith/sb1327w-tv ..
4/29/2021 3:42:39 PM • RCA Televison &... • Answered on Apr 29, 2021
Not finding what you are looking for?
RCA B27TF680 27 in. TV/VCR/DVD Combo Logo

34 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76708 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Cindy Wells

Level 3 Expert

6307 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

stuck dvd

  • Televison & Video
Loading...