20 Most Recent RCA T13208 13 in. TV/VCR Combo Questions & Answers


use the buttons on the tv.

RCA T13208 13... | Answered on Jul 18, 2010


check all your cables installed in your vcr and tv it might be grounded.

RCA T13208 13... | Answered on Aug 09, 2009


The tv has a set of imputs for audio and video ,there is a posibility your dvd is not working right,you can also try a vcr by using the rca audio and video outputs of the vcr to the rca audio and video imputs of the tv,that will tell you if the dvd is not working ,the tv should have a switch selector for video and antena or have a channel below 1 called aux.

RCA T13208 13... | Answered on Feb 17, 2009


There should be an input button on either your remote or TV.

I hope this solution is helpful. Please take a moment to rate this solution.

RCA T13208 13... | Answered on Feb 11, 2009


Recording speed is the last item on the timer programming. SP or SLP. Some remotes have a button that will allow you to change the speed, when recording manually.

RCA T13208 13... | Answered on Sep 18, 2008


i had the same problem i ordered it from this site $10
https://www.vancebaldwin.com/webwiz/wwiz.asp

RCA T13208 13... | Answered on May 24, 2008


i have the same set i used a rca universal remote rcr311w i think its the oem one i bought two of them at walmart i don,t know if they still carry them 

RCA T13208 13... | Answered on Feb 07, 2008


Try clean the AC head with a
foam type head cleaning Q-tip
when you take the cover off
tle AC head is the device
to the R of the drum that
resembles a recordling head
because thats what it is
clean the dark strip up
uner the littl ridge at the
top

RCA T13208 13... | Answered on Nov 22, 2007


You or someone may have press record and the set is in record mode. that way whatever time it's set for it will come on. Or you have to unplug to reset. Leave off for atleast 1hour then plug back in.

RCA T13208 13... | Answered on Sep 26, 2007


I am sorry to have to tell you this, but the only way to change the recording speed is with an original remote. If you look on the original replacement remote link I posted here you will see the SP/EP selector, this is to change the recording speed. Good Luck. http://www.remotes.com/remotes/servlet/rs?a=gmi&smodel=DS13TVR90&brand_pn=FISHER_DS13TVR90&mode=large&uid=11755283300930

RCA T13208 13... | Answered on Apr 02, 2007


Ok you did not cause the problem as you could always turn on the TV set from the front panel button,, If the TV set will not turn on even with the front panel button, there is a major fault with the TV set. This is not a reset that can be done by the user as there is a circuit fault and will require you to take the TV set into a shop to be diagnoised or replaced. Good Luck

RCA T13208 13... | Answered on Mar 27, 2007


The safety circuit is sensing a problem and is why it will not let the tv stay on,the cause could be a problem on the mechanics of the vcr,you need to get an estimate to see if it is worth the repair and might be able to keep using just the tv.

RCA T13208 13... | Answered on Sep 24, 2006


Theres no reset as I know but I only had a couple of these types of RCA and both had tv problems.. In todays VCR's there are no belts to replace or go bad. Mostly all nylon gears and plasic chassis. Most of the faults that lie with todays VCR's are bad Capstan motors ,defective tape loading carriages, defective mode switchs or sometimes even bad cylinder motors. If any of the gears break or cracks it will completely throw the unis mechaism out of alighnment and you will need to know from the manual where to set every gear ,lever and switch or it will never work.. Thats why most VCR;'s today are throwaway as you have to buy a service manual spoend time finding out why the mechanism dosent work and then buy the parts to correct the fualt. Good Luck to ya and heres a # you can call if you do decide to take the unit in for service by an RCA guy.. https://www.rca.com/secure/service/contactrca/1,,,00.html

RCA T13208 13... | Answered on Apr 20, 2006


Lots of videos and text based articles

https://www.google.com/search?q=connect+my+old+GE+VHS+player+to+my+flat+screen+RCA+TV

Sorry we are a year late. I removed your email address. There are over a million views on this site every year, so I hope you didn't end up on a mailing list.

RCA Televison &... | Answered Yesterday


Use code search on your GE URC to find something that works. If a search through all codes stored in your URC fails, try a different URC, e.g, RCA.

RCA Televison &... | Answered Yesterday


Search files for your tv model copy to flash drive and flash your tv needs a software restore or update

RCA Televison &... | Answered 3 days ago

Not finding what you are looking for?
RCA T13208 13 in. TV/VCR Combo Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6164 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

rca t19064 get menu

  • Televison & Video
Loading...