Top 20
RCA 20F510TD 20 in. TV/DVD Combo Questions & Answers
How do you set TV To AUX
Usually, on TVs of this type, you will have a MENU or DISPLAY or STATUS button which you will press. This brings up the first of the status settings. Press again and you'll go to the next one, etc. When you reach the one you need, you will either press the volume UP or channel UP button to change the status to what you want. When complete, the completed function will simply disappear from the screen if no activity is noted within a few seconds. Good luck
RCA TV doesn't power on
Check the fuse. Check is you smell any burned fume from the TV..Next time give the model and year of your TV.
Front panel locked rca tv/dvd combo.tv turns on my
HelloEnter this four digit code when to reset the parential code of your TV and then reset all the settings The four digit code to unlock is [5898]. Then enter a new four digit code. All the settings will come to its original factory settings.
Rca parental lock. Model 20f510td
Hello
Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you. - Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
- Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
- Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
Rca model 20f510td. parental lock
Hello
You must have its original remote control to unlock the parential lock. If you haven't it with you now, try to buy it or gather it from any of your friends or relatives who owns the same model; just to unlock it. After unlock, you can use universal remote or so.
Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you. - Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
- Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
- Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET. OK.
I am able to get
Hello
Just unlock it following any one of the methods described below. Then reset it as your desire. One amoung the following methods will surely unlock your RCA and give you option to do others.
Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
- Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
- Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won
DVD door will not open
Hello
Either its loading belt in the DVD mechanism, or its loading motor has damaged. It is common that the loading belt will get loos of break. Loading belt is a small belt fasted between loadin motor to loading gear mechanism. Replace the same first. You have to open your TV and pull out the DVD mechanism outside for repair. If replacement of loading belt doesn't help, loading motror is faulty, and should be replaced. OK.
We took a lightning strike and my RCA 20f510td has
Hello
The faults occurs during lightning strike is not predictable. At present, the power supply inverter section of your RCA ahs damaged. A thorough chekup must be done to detect whether there is any other faults also occured or not during this time. OK.
I am trying to program my CISCO AT6400 remote to
Hello mw.... This remote does have a "search code" that works for the TV and the DVD mode.
So for the TV you first turn on the TV, then press and hold the TV mode key. While holding the TV mode key also press and hold the OK key. Release both keys and all the mode keys blink twice. Enter 922 by pressing the numeric keys on the remote. The TV mode key blinks twice to indicate a successful entry. Point the remote toward the TV and press play. I had to hold it to make it work. Once the TV turns off press Enter (at the bottom right).
Now I wanted to control the Power button for both the set-top-box (receiver/PVR) and the TV at once. To do this you have to press the STB mode key on the remote. Without releasing the STB mode key, press and hold the OK key. Release both keys and all mode keys blink twice. Enter the programming code 977. The STB mode key blinks twice. For the deconf device, press the applicable mode key (TV, DVD or AUX). The selected mode key blinks twice. You can select all three (TV, DVD or AUX) devices. Press Enter top complete the power switch control programming. The last selected mode key blinks three timesto indicate a successfull entry.
Hope this helps. Joe
thanks for choosing Fixya!!
Not finding what you are looking for?