20 Most Recent
Canon PowerShot SX610 HS Red - Page 5 Questions & Answers
Canon powershot has e32 message
turn off the camera .
place the camera with the lens facing up and check the spacing between the lens and housing. if you notice a gap gently press down the lens on the side where the gap is . try powering the camera back on
How do I get the CD rom for my Canon powershot Sd900?
Perhaps you can type canon powershot sd900 software into Google and download it from the internet. As long as it is from the canon website, it should be safe. Ask a techy friend to help you if you're not sure. Good luck!
How to recover deleted photos
If the photos were on a memory card and you haven't done anything to the card since you deleted the photos then you may be able to recover at least some of the photos. Do a Google search for "data recovery software" and select a program for your computer and operating system. Take the memory card out of the camera and put it into a card reader attached to your computer. Cross your fingers and run the program.
Why won't my Dell computer, using windows 7, recognize my Canon Power Shot A720is when I try to download pics ?
Try NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa ( http://picasa.google.com
How do i fix a Canon s3 stuck shutter?
There is a guy on Bay that fix this issue for a low price. Fix is for Canon S2, S3, S5 with stuck shutter. here is the link in case you need: http://www.ebay.com/itm/141414188140
How to fix E32 error on canon powershotSD1300IS
This error normally comes when your Canon camera lens gets stuck in the barrel itself. There are some steps which can be followed to resolve this problem which as follows,
STEP 1: Switch on the camera while you hold the shutter button and connect it to the AC adapter or to the USB cable at the same time.
STEP 2: Now by default the lens should get properly aligned if not try to twist them slightly by holding down the camera lens with soft hands.
STEP 3: Just push and pull the lens slightly as it extends automatically.
STEP 4: Now when the lens is in the hard surface power on your camera.
STEP 5: Try to hit the camera softly beside the lens which might solve the issue.
You can try to format the memory card completely and then reinsert to your camera which might be the issue at times.
All of a sudden my power Shot SD1000 Digital Elph is taking blurry pictures. HELP.
Camera shake is more likely the reason. These cameras do not have image stabilizers so a steady hand is a must. A mini tripod is a great item to use. Or just sit it on a ledge and press and see if it is any better. Also setting it on self timer (while on the ledge) gives the camera a chance to be stable without you touching it. Hope this helps. Also check what setting you have it on.
Format feature does not light up
Check your shooting mode. Some features are available for a given mode only. If you set your camera to a pre-programmed mode, many features will be greyed - not available.
Not finding what you are looking for?