20 Most Recent Samsung SV5000W VHS VCR - Page 4 Questions & Answers

No one uses Universal Remotes these days! https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote

Samsung TV Remote codes for Universal ... - DirecTutor

DirecTutor https://www.directutor.com > content > remote-control... Remote Codes Samsung TV using GE Universal Remote · 0105, 007, 70076, 0109 · 0007, 0009, 0004, 0005 · 0085, 0172, 0942, 0358 · 0012, 0015, 0080, 0104, 0106. ..

Here ici https://www.google.com/search?q=samsung+cs21k30ml+schematic+diagram ..

That sounds like a pixel issue and a replacement CCD imager is the only cure. Probably too large, more than a few pixels out, to cancel it with software.

Even if you choose to browse the selections on the Samsung site, check the specifications of the new DVR to ensure that it supports the same type of cameras and has the same number of channels as your current DVR. That information would most likely be in the hands of Samsung or the manufacturers of your cameras. I would check with their customer support. and/or a download of the user manual of the DVR of interest. Possibly someone at Best Buy might have access to compatibility information being a retailer of such. Some of the other popular brands that offer security DVRs include Hikvision, ZOSI, and Dahua.

https://samsungtechwin.com/program-samsung-remote-bn59/ Good luck

If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/

The Humax Box has a lot of issues! https://www.google.com/search?q=Samsung+DV3+connect+to+Humax+YS-5000 ..

It sounds the Roku Dongle has failed. Have you got a DVD that you can use on the set to prove it is the Roku and not the television? Actually, no need, it is a well documented fault!! https://www.google.com/search?q=roku+device+causes+snow ..

You need a new television or professional repairs, 120,000 volts does a lot of damage. You can put a claim into the electricity utility company as they will have notice of the surge and they are supposed to keep the voltage even. You can also claim on home insurance.

Question edited for clarity, spelling and remove abbreviations. Question moved from Motorcycles category. It has a feature called 'Ambient Mode'. You would better off having the Weather Network App on the television and on your Smart Phone and set it for Notifications. The App is free. The TV app is available for download on Roku, Apple TV, FireTV Stick, Amazon FireTV, AndroidTV, Panasonic, Sharp, Sony, Samsung, Philips, LG, Huawei, and through most other Smart TV and Streaming devices.

The Weather Network, M?t?oM?dia TV Apps - FAQ

Use Ambient Mode on your Samsung TV

Samsung https://www.samsung.com > answer > ANS00082422 You can display d?cor, weather info, news, photos, and artwork. You can even ... Press the Down directional button to change these settings: Color and Theme ...

Ambient Mode on your Samsung TV

Samsung https://www.samsung.com > answer > ANS00088842 With Ambient Mode, you can display a variety of content on your TV screen, including images, artwork, weather updates, news headlines, and even music. To use ... It is a nice set! https://www.samsung.com/us/televisions-home-theater/tvs/qled-4k-tvs/65-class-q60-qled-smart-4k-uhd-tv-2019-qn65q60rafxza/ ..

0396,0392. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/

Press the Menu button on your remote control. Navigate to Picture and select it. Scroll down to Expert Settings and select it. Scroll down to Auto Motion Plus Settings (Picture Clarity Settings) and select it. Change the setting to either Off or Custom.

Hi Andy, first off, please don't use caps when sending a message as it's harder to read and seems like your screaming. With that being said there are a few things in your message that I need to address, I pulled up a service manual on your TV and it doesn't have a tcon board, this set only has 3 boards, the power, main and wi-fi card, so not sure what boards you're calling the tcon boards. Next thing I don't understand is you said when you disconnect the power going to the main you have sound, that's not possible, if you unhook the power to the main you would never get sound so I assume you may have unhooked what's called the LVDS plug, that's the flat ribbon cable going from main to in this case to the panel boards. On Samsung sets if the connector is unhooked going to the main board the inverter that drives the backlights will come on and you will get backlights if they're working like they are in your case. You said if you hook it back up you get a fluctuation of a blue and black (no backlight) issue. What I believe you have going on is a short in either one of the COF (chip on film) IC's or another device on one of the panel boards is bad. What I want you to do is unhook one of the panel board connectors at a time and see if you get half a normal picture, you need to power the set off when you go from one ribbon connector to the next, I think you will find one of the boards is working and you get half a picture. Now for the not so good news, if the panel is bad the set isn't fixable, you can try searching "fixing a TV with a piece of tape" for an idea of how you may be able to get the set working again but it may not work totally correct.. I'm not going to describe this procedure as you will see how it works by the videos.

Well, it could be any of about 25 components that are bad, start by testing bridge rectifiers, if they look good test the main power mosfet, of that looks good look for a shorted component on the cold side of the power supply, Unless you have some form of degree in electrical engineering this may be a bit over your head.

No such option given in the Owner's Manual Samsung MW1080STA Owner's Manual download pdf (manymanuals.com)

It sounds like you have an issue with the Anynet+ (HDMI-CEC) function. When the home theater system is connected to a compatible TV by an HDMI cable, you can sync the operations when this is enabled on both the TV and the home theater system. You need to be turn the feature off on one or both devices. If you have another HDMI port on the TV, you could move the HDMI cable to that port. (Most TVs only have one HDMI-CEC enabled port.) Note: this turns off the audio return channel option. If you only have the HDMI cable connected between the TV and the HT-EM53C, you will need to connect another cable. Depending on the TV, this could be an optical audio cable, analog RCA audio cable or headphone (3.5mm) to RCA audio cable. The manual for the Samsung HT-EM53C is available at ManualsLib here: https://www.manualslib.com/manual/355628/Samsung-Ht-Em53c.html . A summary of the Anynet+ feature is here: https://www.manualslib.com/manual/355628/Samsung-Ht-Em53c.html?page=29#manual . Accessing and navigating the Settings menu is discussed here: https://www.manualslib.com/manual/355628/Samsung-Ht-Em53c.html?page=25#manual . Press the Home button on the remote and go to the icon with the gear. I hope this helps. Cindy Wells

Our Fixya television Expert Larry provides a great answer Larry Oct 09, 2023 I can give you some help on your TV. This is a plasma set so there won't be backlights. Capacitors in this set don't "blow up" unless they're over driven, but I doubt you have cap issues, a guess as to what made the pop sound was one of the transistors on the x-sus board, the one with the 2 large black heat sinks. Those are kind of known for giving issues and it's normal for them to short, and sometimes this causes a pop sound. Best way to fix it if you want to spend the money is replace both the x-sus and x-driver boards, a replacement sus board may fix it but a lot of times the issues starts with the driver, so a replacement sus can be damaged unless both boards are replaced, btw these boards won't be cheap, and they're hard to find, do NOT buy one from ebay, www.shopjimmy.com is the best place to get boards however I doubt they will have them on a tv of this age. Also don't try replacing the bad field affect transistors, they will blow again. ..

This will sound like a very obvious answer but have you tried contacting Samsung with the details of the item and asking if they can supply you with one!

Question edited for clarity and what I think you thought you were saying, except for 'Tv is oler'. Older or OLED? You don't say WHY you want to connect your phone to your television. This television is VERY basic. The HDMI Ports will be looking for a DVD or Video tape player AV data signal, not a phone. https://www.usa.philips.com/c-p/32PFL5322D_37/81-cm-32-inch-lcd-integrated-digital

Philips 32PFL5322D/37 Manuals

ManualsLib https://www.manualslib.com > ... > LCD TV PHILIPS 32PFL5322D/37 Manuals. Manuals and User Guides for PHILIPS 32PFL5322D/37. We have 4 PHILIPS 32PFL5322D/37 manuals available for free PDF download: User ...

Check in the service menu.