20 Most Recent Samsung HCM4215W 42" Rear Projection Television Questions & Answers

0helpful
1answer

Cannot not line up the red and blue lines on my

Needs new convergence amps and possibly a few low ohm resistors.
Those Samsung amps usually run hot to the touch and sometimes only last 4 to 5 years depending on usage.
9/25/2019 1:12:09 AM • Samsung HCM4215W... • Answered on Sep 25, 2019
0helpful
1answer

El tv samsung al cambiar

English!
12/1/2017 10:15:14 PM • Samsung HCM4215W... • Answered on Dec 01, 2017
0helpful
1answer

HCM4215W SAMSUNG TV TURNS ON AND TURNS OFF AFTER ABOUT 5 SECONDS

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
3/29/2017 1:52:51 PM • Samsung HCM4215W... • Answered on Mar 29, 2017
0answers
0helpful
1answer

I need to order a new covergence board for my

best go to Samsung technical support to deal with this.
2/2/2017 12:05:50 PM • Samsung HCM4215W... • Answered on Feb 02, 2017
0helpful
1answer

I just had my lamp replaced and when I turned of the 50 incTV, the light was still on. Is the cable connected incorrectly?

is it the lamp light shining out the back? or the lamp indicator on the front of the tv being on? if it's just an indicator light, there should be an option in your tv's set up menu to reset that light, generaly speaking unless something was forced, the lamp cartage will only fit one way, just make sure the covers are closed, if it working and the nag light is still on that should be able to be reset in the tv;s set up menu
11/13/2014 8:41:17 AM • Samsung HCM4215W... • Answered on Nov 13, 2014
0helpful
1answer

Picture is getting dark.

Try changing the lamp, some times as they age the electrodes in the arc lamp evaporate and depositing inside the arc tube, causing it to darken, if the lamp is clear there is a good change that the light tunnel is broken or has other problems with the light engine
11/13/2014 8:35:21 AM • Samsung HCM4215W... • Answered on Nov 13, 2014
0helpful
1answer

Samsung Model # HL-P5674N

nothing else is required except inserting it right which is not hard==lamp does not seem to be your problem, Other things will cause this issue as well, it is not always the lamp that is bad.One thing you might want to do is remove here the new lamp unit to make sure it went in clean and straight, With it removed look in the direction the lamp faces for the color wheel, look to see it is intact and not shattered, I attach a photo.I mention as this is also a common issue in this set, usually proceeded by a high pitched fan like sound or even when failing a grinding noise. 4_5_2012_11_57_23_am.jpg
4/5/2012 11:57:42 AM • Samsung HCM4215W... • Answered on Apr 05, 2012
0helpful
1answer

Samsung HCM 4215W when on, no picture timer blinks & chirp sounds

Sounds like a shorted component in the power supply or the high voltage circuit.
Time to call a professional.
12/2/2011 4:35:25 AM • Samsung HCM4215W... • Answered on Dec 02, 2011
0helpful
1answer

When I turn the television on, the red comes on,

If this tv is a Samsung HCM4215W with the symptom you described you are likely to have fluid leak on the board. Sounds like a classic fluid leak problem since the audio does come on and then going intermittent. If you find fluid from the tube(s) on the board then the set could not be worth fixing unless you can break up the fluid with degreaser spray. The fluid is conductive and will cause intermittent or shut down altogether the set. Look for the fluid as a clear substance. Also you may have a bad proscan board (module) Comes on with audio and no picture then on/off REPLACE PRO SCAN MODULE BP95-00077A. Do a search online for part for availability. But look first for the fluid leak.
10/31/2011 1:32:35 AM • Samsung HCM4215W... • Answered on Oct 31, 2011
0helpful
1answer

THERE IS A BRIGHT WHITE

Get a new one
9/23/2011 3:29:56 PM • Samsung HCM4215W... • Answered on Sep 23, 2011
0helpful
1answer

Light blinks there is sound but no picture

We have a Samsung DLTV that does this when the bulb needs to be replaced. We have to replace the bulb quite frequently. You can look up the bulb you need online using the model number of your TV. I hope this helps.
9/14/2011 6:23:07 PM • Samsung HCM4215W... • Answered on Sep 14, 2011
0helpful
1answer

Unable to adjust the blue

Your convergence has failed and needs to be repaired. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. You can call in a repair shop or you can get the parts and instructions from www.TvRepairKits.com and do the repair yourself. Its a fairly easy DIY fix.
8/11/2011 9:51:54 PM • Samsung HCM4215W... • Answered on Aug 11, 2011
Not finding what you are looking for?
Samsung HCM4215W 42" Rear Projection Television Logo

Popular Tags

197 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Ekse

Level 3 Expert

13435 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Samsung Televison & Video

  • Samsung Televison & Video

Most Popular Question

cannot not line up red blue lines

  • Televison & Video
Loading...