20 Most Recent Samsung HLN4365W 43" Rear Projection HDTV-Ready Television - Page 8 Questions & Answers


It is most likely that your power supply PCB is faulty. Some have had luck with the following procedure to correct it, so you might try this:

Unplug the TV for 30 seconds, and then plug it into a working outlet.
  1. If the standby light comes on (and doesn't flash or blink), your TV is receiving power and will probably turn on now just fine. ...
  2. If the standby light comes on but flashes or blinks, or if the standby light still doesn't come on, service is required.

Samsung... | Answered on Nov 27, 2020


If you've switched on your TV and the sound comes through fine, but you're not seeing any picture; there are 3 potential issues. No video with normal audio on a Smart TV will the result of one of the following issues: ? A connection issue; the most common problem. Where there is a bad connection, faulty cables or improper installation.
? An issue with the device connected to the TV. There may be a video output setting on the device that you must set properly before it will output to the TV.
? There is something wrong with the TV, which will require a technician to assess the TV and find a solution.

Samsung... | Answered on Nov 25, 2020


Request the diagram from Samsung.

Samsung... | Answered on Nov 25, 2020


Applicable code(s) would be in a compatible remote control

Samsung... | Answered on Nov 25, 2020


When a TV is showing vertical colored lines, a loose wire cable in the TV might be the cause. If you knock on the back of the TV, the vertical colored lines MAY disappear temporarily. This is a sign that a cable is loose or the T-Con board is faulty.
A black screen could just be a sign that the TV is turned off, although if it is producing sound then you know that's not the case. When your TV has a black screen even when it's on, it's quite possible it could actually be your external device and not your TV.

Samsung... | Answered on Nov 23, 2020


You seem to have solved the issue yourself!

If the Backlight issue has been resolved and you are sure they are not the issue then if the diffuser screens have been replaced in a different order or reversed then this is the problem!

To resolve it you should dismantle the TV and rearrange the diffuser screens and test before re-assembling the TV.

Samsung... | Answered on Nov 21, 2020


its very easy.
browse www.ifixit.com
there you will get all the information , solutions and codes.

thanks

Samsung... | Answered on Nov 21, 2020


1. Open internal fuse
2. Power supply failure

Samsung... | Answered on Nov 20, 2020


Please don't post follow-ups as new posts. It doesn't work as your new post has no context to you previous posts. Messages are not threaded here! Post to the original post by clicking COMMENT under the person you are replying to. Here is your posting history.

https://www.fixya.com/users/paakwesi

..

Samsung... | Answered on Nov 17, 2020


Contact Samsung to request it.

Samsung... | Answered on Nov 17, 2020


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Samsung... | Answered on Nov 16, 2020


Sears Parts Direct lists the part numbers for the WF317AA/XAA-00 washing machine here: https://www.searspartsdirect.com/model/2dzt64b7oq-001482/samsung-wf317aas-xaa-00-washer-parts . Look at the control panel diagram. The main control PCB board appears to be MFS-WF317-00. The control panel is MFS-F2WLHA-S0. However, no sources appear to have the parts for this model in stock.

I hope this helps and I wish that I had better news for you.

Cindy Wells

Samsung... | Answered on Nov 13, 2020


It is an easy process to setup Mobdro on Samsung Smart TV. Samsung Televisions are not Android exactly but they are hybrid of Web OS and Samsung's Smart Hub. To Set up Mobdro on Smart TV follow the steps: https://www.juststream.io/how-to-install-mobdro-on-smart-tv

Samsung... | Answered on Nov 13, 2020


If you are handy enough to take the back off the set, look at the caps (capacitors) on the main board, I had 4 popped on my samsung with a similar problem. $4 repair.

Samsung... | Answered on Nov 11, 2020

Not finding what you are looking for?
Samsung HLN4365W 43" Rear Projection HDTV-Ready Television Logo

Popular Tags

70 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HL Samsung

  • HL Samsung

Most Popular Question

replaced color wheel in samsung hln4365

  • Televison & Video
Loading...