20 Most Recent Cavs JB-99 - Page 7 Questions & Answers


ic 76931 7n 59y4 service mode

Televison &... | Answered on Jul 09, 2020


WE WANT VIDEOCON CTV IC 9370PS SERVICING REMOTE CODE

Televison &... | Answered on Jul 09, 2020


The resistor should be 220R metal film 1W

20200527_140431-undefined-undefined-0.jpg

Televison &... | Answered on Jul 09, 2020


If you wish to get some details; check the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/
faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.
Screen-shots to defective LCD and Plasma panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.

Televison &... | Answered on Jul 09, 2020


Go to first time installation.Complete process and sound will return.

Televison &... | Answered on Jul 09, 2020


Open fuse or failure of a power supply component

Televison &... | Answered on Jul 09, 2020


If the power board was faulty, you would have no sound either.
Shine a torch at the screen, if there is a picture then the back light is faulty.

Televison &... | Answered on Jul 08, 2020


TRY CHANGING THE INPUT SOURCE

Televison &... | Answered on Jul 08, 2020


Hi there, I've just looked on Amazon and there is remote controls for a Fire TV for about £30, have a look and you should be able to buy one. Don't get mistaken by the Fire Stick remote as they sell those alongside the TV remote, good luck.

Televison &... | Answered on Jul 08, 2020


Use the phone that has ir blaster as a remote.
Like all the Xiaomi phones have ir blaster

Televison &... | Answered on Jul 07, 2020


Hi. Without a photo is hard to say with sure. But probably you have a lcd or led tv, so verticals lines is a screem defect with sure and unfurtunatly this doesn't repairable.
The solution will be replace the display screen, but I don't think it's worth it.

Televison &... | Answered on Jul 06, 2020


What is the model number of your smart TV. Without it, it is difficult to advice you. Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details of many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.
View the site by desktop or webview on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts.

Televison &... | Answered on Jul 06, 2020


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Televison &... | Answered on Jul 06, 2020


It is impossible to unlock it, without its original remote control. No universal remote control will go. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops; and by Online shopping

Televison &... | Answered on Jul 06, 2020


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Firmware updates and other details of may devices are given.

Televison &... | Answered on Jul 06, 2020


? STAY AT HOME & WORK AT HOME FOR USA ? I started earning $350/hour in my free time by completing tasks with my laptop that i got from this company I stumbled upon online...Check it out, and start earning yourself . for more info visit any tab this site Thanks a lot Here............................www.livejumps.com

Televison &... | Answered on Jul 06, 2020

Not finding what you are looking for?
Televison & Video Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Cavs Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Cindy Wells

Level 3 Expert

6133 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Cavs Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cavs Televison & Video

  • Cavs Televison & Video

Most Popular Question

machine in bar burned lots smoke damage

  • Televison & Video
Loading...