20 Most Recent Epson WorkForce WF-4630 Wireless Color All-in-One Inkjet Printer - Page 3 Questions & Answers

First, pull the power cord from the 3800. Open the top cover, then, plug the power cord back in. After a few seconds the head will leave the parking station and move to the left. Pull the plug again before the head has time to move back to the parking station. OR In case You Need Online Assistance Then follow Us For ON: Epson Printer Support

this link explains how to set time on Epson 520 http://files.support.epson.com/htmldocs/wf520_/wf520_ug/wwhelp/wwhimpl/js/html/wwhelp.htm

Try to clean the film.

It could be possible that both of the cartridges you're using are empty. Also, Epson released a Firmware update on all workforce printers that really fix a lot of bugs that are with the systems. If you know they're both full, put the printer in the change in position (press ink button while printer is in standby with the power light steady) wipe the chip of the cartridge and blow on the metal connector inside the cartridge carriage. After doing all these processes close the door to the carriage, press the ink button and it should take right off.

Click the start button on the bottom left had sid of screen. Find and click control panel. In the top left hand of the screen click on classic view. the icons will be in alphebetical order. look for device manager and click. I hope this helps.

Go to your Program files and find Epson. Then go into the folder and find the scan program. You will know which one it is if when you open it your scanner program will run. Once you find it, right click on it and send it to the desktop as a shortcut.***If you need any technical help on printer then you can reach at here