Simbans TM S10W 10 Inch Tablet PC - QUAD CORE CPU, 8GB HDD, Android 4, Dual Camera, 1024x600 pixels - WHITE - Answered Questions & Fixed issues


You just connect it with you USB cable and transfer using Windows Explorer. It will be shown as a Removable Drive.

No drivers or software exists. Brand leader is iPad, which does have some capabilities via iTunes.

Simbans TM S10W... | Answered on Aug 24, 2018 | 188 views


I can help you reset it, but you will likely lose your photos, if interested send me make/model at [email protected]

Simbans TM S10W... | Answered on Mar 23, 2016 | 90 views


If you have little experience with the modification of Android devices then it's unlikely that you will be able too, but if you have a micro SD card in then you can pull it and plausibly save your pictures

Simbans TM S10W... | Answered on Mar 23, 2016 | 158 views


On your internal storage SD card there is an App partition. This is where all your apps are stored. Many devices have a small App partition like maybe 1 gigabyte. It doesn't take long to fill this up with additional apps.

Many Android devices display this App partition storage bar graph in Settings > Storage. It's usually the top horizontal bar graph. If it's all one color then it's full and it will perhaps say something like 1 gigabyte of 1 gibabyte used. The only way to get
more room to download new apps is to delete some of the old ones, or in some case a few of them might be able to be moved to the external SD card if your device has one in its slot.

Simbans TM S10W... | Answered on May 24, 2015 | 202 views


Whats your tablet brand and model ? Do you want to unlock your tablet from carrier lock? If so, use unlock code . You can get it from any of the online vendors like SimpleUnlocking.com to unlock it .

Simbans TM S10W... | Answered on Oct 25, 2014 | 354 views


Hi Wanda,
First make sure that it is fully charged before you use it. Then push the button on the side. Here is a youtube video on how to use it:
http://www.youtube.com/watch?v=b210pnWgKMM

Best regards,
Bill

Simbans TM S10W... | Answered on Oct 25, 2014 | 105 views


As you probably realise you are entering the wrong pattern! You will have to wipe everything with a factory reset back to when new!

Simbans TM S10W... | Answered on Oct 25, 2014 | 148 views


Sounds like the power button switch has given up on you. With a lot of care and time, you can fix this yourself for a few dollars if you buy the part and tools on eBay, or you can just take it to a repair shop.

Simbans Tablets... | Answered on Jun 07, 2018 | 164 views


swipe down from the top and check the settings in "audio profiles" See if the speaker is muted.

Simbans Tablets... | Answered on Jan 25, 2018 | 113 views


Your manual is here.

Turn your device on and off To turn on your device, press and hold the power key.
To turn off your device, press and hold the power key, and then tap Power off?OK.


Manuals

Simbans Tablets... | Answered on Dec 29, 2015 | 627 views


To reset your tablet you need to go to setting then find backup & reset and when you are there you should click on factory reset

Simbans Tablets... | Answered on Aug 18, 2015 | 252 views


If you did a hard reset to factory then that would return the tablet to as new when there was no password!

Something does not make sense!

Tablets &... | Answered 17 hours ago | 43 views


First of all, check the device's power is off. Then open the sim card slot and place the sim with gold plating downward and close the slot. You are good to go with your tablet.

Tablets &... | Answered 21 hours ago | 357 views


How to Recover Data from Android Phone with Black Screen

Broken Android data Extraction can help you recover data from black screen of Android phone.Note that currently the data recovery from black screen phone supports to Samsung galaxy S6/S5/S4,note 5/4/3.

You will be able to recover contacts, photos, messages, videos, music, call history, WhatsApp chats, documents from black screen Android phone.Generally speaking you should be able to recover data from broken Android phones by this program with broken screen, black screen, touch screen not work, can't enter system or more circumstances.

LEARN MORE





Tablets &... | Answered Yesterday | 129 views


Hi, you need to perform a factory reset, follow these instructions:

  1. Turn tablet off. You may need to use two hands in this process to press and hold buttons properly.
  2. Turn on the tablet with power button, wait a full 2 seconds from the time the tablet starts showing the red Motorola logo, then press and hold the down Volume key. (you should not hold down the power button after it turns on and logo appears)
  3. "Android Recovery" will appear on top of screen if timing is done correctly. Release volume button. (if you continue to press volume down at that message, the message will cycle through "RSD, Fastboot, and back to Android Recovery. Make sure message states Android Recovery before you go to next step). If stuck at a RSD protocol or Fast boot screen, reboot the tablet by holding power button then pressing the volume up).
  4. While screen states "Android Recovery", Press volume up button, the screen will say "Entering Android recovery mode" and a few seconds later an Android robot graphic will appear alone on the screen. Release buttons.
  5. Hold down power button and then press the volume up key together to see the Android Recovery screen menu selections.
  6. Use the volume buttons to move up and down through selection in this menu.
  7. Using the volume down button, scroll down to "Wipe data/factory reset"
  8. Tap Power hard key to select option.
  9. Scroll down to select "Yes, delete all user data".
  10. Tap the power button to select. Wiping and formatting data will take a few minutes.
  11. You will return back to the Android recovery screen menu.
  12. Tap the Power button to "Reboot system now" which will power-cycle tablet and eventually power back on to the Initial Set-up / Welcome screen present when you first turned on your tablet.

Tablets &... | Answered Yesterday | 380 views


I had same problem looping startup just showing Aenova screen, i tried the pin thing ended up doing a factory reset IT WORKED WAHEY!!
How can I do a Factory Reset on my tablet? If your tablet freezes often or if you get error messages during the start up of your tablet, you can use the recovery mode to reset your tablet to its factory settings, removing all installed applications as well as any data or content.
Your tablet must be up to date with the latest firmware - downloadable from the downloads area of this website.

To access Recovery mode on the ARNOVA 10bG3
To access to the recovery mode:
1. Hold down the volume button + and press the ON/OFF button.
2. Once the boot logo ARNOVA is displayed, release the volume button +.
The ANDROID green robot is displayed.
3. Once the ANDROID green robot is displayed, press simultaneously the volume button + and the ON/OFF button.
The Android system recovery screen is displayed.
a. Use the volume buttons to navigate
b. Use the ON/OFF button to select an option

To restore the default parameters of your tablet:
1. In the Android system recovery, select Wipe data/factory reset;
2. Select Yes -delete all user data.
3. Select Reboot system now.
Your tablet reboots. Redefine your parameters through the wizard.
Your tablet is restored to its default settings.


To access Recovery mode on the ARNOVA 9G3
To access to the recovery mode:
1. Hold down the Home button and press the ON/OFF button.
2. Once the ARNOVA boot logo is displayed, release the Home button.
The ANDROID green robot is displayed.
3. Once the ANDROID green robot is displayed, press simultaneously the volume button + and the ON/OFF button.
The Android system recovery screen is displayed.
a. Use the volume buttons to navigate
b. Use the ON/OFF button to select an option

To restore the default parameters of your tablet:
1. In the Android system recovery, select Wipe data/factory reset;
2. Select Yes -delete all user data.
3. Select Reboot system now.
Your tablet reboots. Redefine your parameters through the wizard.
Your tablet is restored to its default settings.


To access Recovery mode on the ARNOVA 8cG3/8bG3
To access to the recovery mode:
1. Hold down the volume button - and press the ON/OFF button.
2. Once the boot logo ARNOVA is displayed, release the volume button -.
The ANDROID green robot is displayed.
3. Once the ANDROID green robot is displayed, press simultaneously the volume button + and the ON/OFF button.
The Android system recovery screen is displayed.
a. Use the volume buttons to navigate
b. Use the ON/OFF button to select an option

To restore the default parameters of your tablet:
1. In the Android system recovery, select Wipe data/factory reset;
2. Select Yes -delete all user data.
3. Select Reboot system now.
Your tablet reboots. Redefine your parameters through the wizard.
Your tablet is restored to its default settings.

Tablets &... | Answered Yesterday | 6,712 views


Try
Settings / Backup & Reset / Reset

Tablets &... | Answered Yesterday | 862 views


Hi Doug
I press two buttons at the same time on my tablet and a photo goes into my photos
Volume Down and Power buttons at the same time
Cheers
OR

Use a dedicated App

6 Ways To Take Screenshots On Android

Screenshot Capture Android Apps on Google Play

Tablets &... | Answered Yesterday | 112 views

Not finding what you are looking for?
Simbans TM S10W 10 Inch Tablet PC - QUAD CORE CPU, 8GB HDD, Android 4, Dual Camera, 1024x600 pixels - WHITE Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Simbans Tablets & eReaders Experts

 Mikey
Mikey

Level 3 Expert

6269 Answers

Tom Chichester

Level 3 Expert

55379 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

32322 Answers

Are you a Simbans Tablet and eReader Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...