Top 20 Dyson AM08 Pedestal Fan Questions & Answers

manual
0helpful
1answer

My power flash off & back on, now I have an F6 error, how do i fix / reset it? Thanks

Hi Dana, it's Jack at Dyson. I'm sorry to hear you're having difficulty with your Dyson Cool AM08 Pedestal fan. If your machine displays an F6 error code I would strongly encourage you to contact Dyson directly, as we will need to provide further assistance to help you to resolve this. When you have your machine easily to hand, please contact the Dyson Customer Helpline on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU). Our experts will be happy to take some additional details and advise you of your options. We'll look forward to speaking with you.
6/1/2015 5:34:44 PM • Dyson AM08... • 1,590 views • 0 helpful votes
0helpful
1answer

Dyson Am04 model no longer turns on due to a power surge. What part is required to fix it? TIA.

First thing is to check the wall socket. Use a desk lamp or something similar and plug it into the socket you use for the heater. If the lamp works so does the socket. Next check the fuse. UK machine have a fuse in the plug, other countries use different systems. If all these check out OK the surge may have damaged a circuit board inside the heater. Only a Dyson specialist could help you with that.
8/17/2020 4:43:12 AM • Dyson Dryers • 251 views • 0 helpful votes
0helpful
1answer

My dyson hot and cold fan is displaying code C2 and won't turn on or off

quote from amazon site***Mine also showed H2. I had a suspicion that it was the remote causing it. Changed the remote battery (CR 2032), turned on the heater and let it circulate for 3 minutes, then I went and tested all remote buttons. It worked! No more H2 error code! Amazon Customer · September 11, 2018
8/28/2019 3:05:02 PM • Dyson Dryers • 1,583 views • 0 helpful votes
0helpful
1answer

DYSON AM08 PEDESTAL FAN HAS OPERATED FLAWLESSLY FOR TWO YEARS ! TODAY I STARTED IT , IT RAN AS USUAL THEN QUIT AFTER A MINUTE. I TRIED AND SEARCHED FOR A CAUSE FOR AN HOUR FOUND NOTHING UNUSUAL. WHAT COULD BE WRONG?

Probably the bearings are dry. remove the fan and housing to get to the shaft and oil it. The circuit breaker is shutting it off because it is drawing excessive current.
9/24/2019 4:18:06 AM • Dyson Dryers • 408 views • 0 helpful votes
0helpful
1answer

H2 error code on Dyson hot/cold fan unit.

what is the question?
10/28/2018 4:49:37 PM • Dyson Dryers • 18,781 views • 0 helpful votes
0helpful
1answer

My dyson heater-fan shows a E8. What should I do?

7/5/2018 11:54:33 AM • Dyson Dryers • 3,867 views • 0 helpful votes
0helpful
1answer

How to detach Dyson Pedestal AM08 fan?

Call Dyson support, I do not have this answer and a search rendered no results

DYSON USA SUPPORT

Call us at 1-866-693-9766
8/2/2018 10:02:04 PM • Dyson Dryers • 303 views • 0 helpful votes
0helpful
1answer

What size battery do I need for the dyson hot and cool heater remote?

Open the battery access panel and if no batteries are present, look in side of battery holder and the size/type is usually stamped in the cradle. I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720
10/18/2017 8:29:20 PM • Dyson Dryers • 516 views • 1 helpful votes
0helpful
1answer

What does code f4 mean on a dyson am08 fan

Turn the power off and unplug the machine for 60 seconds. Plug the machine back in and turn power on. Repeat this process up to 3 times until the F4 error code has cleared.
9/29/2015 2:58:49 AM • Dyson Dryers • 8,664 views • 0 helpful votes
0helpful
1answer

My bladeless dyson fan frequently does not work. When you turn the power button on the light blinks blue. I've only had it a month

Hi there, it's Jack at Dyson. A blinking on/off switch LED light can indicate an interruption to the power supply. However we'd appreciate the chance to check your machine is working correctly - it sounds as if it should be well within our 2-year warranty period. Please get in touch directly so our experts can help. You can reach us on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).
3/17/2014 7:21:37 PM • Dyson Dryers • 937 views • 0 helpful votes
0helpful
1answer

Circuit board repair

ACS repairs most makes and models of circuit boards. If you do not see your manufacturer in our LIST OF OEM MANUFACTURERS, don't worry. We can probably repair your item. Call to speak to one of customer service reps for help, 1-800-605-6419, email at [email protected], or use our Contact Pagebathroom light
5/8/2012 6:52:40 PM • Dyson Dryers • 537 views • 0 helpful votes
0helpful
1answer

Logik lhp8w22 fault - suspect E05 as dont have manual

https://currys-ssl.cdn.dixons.com/manuals/Logik%208%20kgs%20Heat%20Pump%20Tumble%20Dryer%20LHP8W22%20Manual.pdf
12/2/2022 4:08:20 PM • Dryers • 27 views • 1 helpful votes
0helpful
1answer

Logik LVD7W18 Tumble-dryer making a knocking sound

Hi, One might need to oil up some of the internal parts of the dryer that are not electronic. It sounds like there might be friction causing the nocking sound. After the oiling of metal portions of the dryer, the sound should go away. Thank you.
11/17/2022 9:14:02 PM • Dryers • 29 views • 0 helpful votes
0helpful
1answer

Why does my dryer keep shutting off?

Please always include FULL 'make model (what it is)'. Question moved from Cars and Trucks! Overheating dues to clogged air flow or failed temperature management sensors (they have 3) in your mystery dryer.
11/26/2022 8:17:00 PM • Dryers • 20 views • 0 helpful votes
0helpful
1answer

I just installed a Fanimation Blitz fan with light kit. The light works but the fan does not, Any suggestions.

Incorrectly wired is the most likely reason. Different makers wire in different ways. I have not heard of this make before. https://www.google.com/search?q=fanimation+blitz+fan+with+light+kit+wiring+diagram ..
10/30/2022 1:37:08 PM • Dryers • 28 views • 1 helpful votes
0helpful
1answer

Milnor industrial dryer gives a three wire disable warning and won't switch on

Check your incoming power supply cables, you might have a loose connection
10/11/2022 8:03:48 AM • Dryers • 41 views • 0 helpful votes
Not finding what you are looking for?
Dyson AM08 Pedestal Fan Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Dryers Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2029 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

NOEL
NOEL

Level 3 Expert

8603 Answers

Are you a Dyson Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dyson Dryers

  • Dyson Dryers

Most Popular Question

power flash off back now f6 error

  • Dryers
Loading...