20 Most Recent
- Page 8 Questions & Answers
Girbau fault codes
Continental girbau cg75-85 error code efan07 on led. What's this for?
7/13/2022 11:31:16 AM •
on Jul 13, 2022
How do I change the belt in my neptune dc?
'neptune dc', gives this
Full make, friendly name and numerical model helps.
Start at the back, remove the top console, remove the screws down the rear edges, remove the kick strip screw. The case should pull off forwards. Be careful at first and disconnect the door switch wires. The belt goes around the drum and the motor pulley and is tensioned by an idler pulley.
Oil the drum slides and rear bearing when you put it back, as well as vacuuming all the lint.
7/11/2022 4:32:07 PM •
on Jul 11, 2022
Zanussi TD4112W dryer does not heating anymore
in the UK are you???? cloths tumble dryer it is (true name)
you dismantled it and scrambled up the wiring, and did not buy the service manual to fix it?
call a service tech to fix this and they well charge extra for hacked cloths dryers.
moved you to dryer from CARS
- buy the manual
- or call for service.
- guess and smoke out.
240vac can be lethal , do not connect dryer to AC jack and touch parts inside , unless life insurance is paid up. or lucky
7/2/2022 11:21:27 AM •
on Jul 02, 2022
My Simpson Minimax 8p clothes dryer runs but the element does not heat.
If a dryer runs but doesn't heat first thing to check hi limit cut off on heating element. if it doesn't run at all check the little white thermal fuse on the blower assembly, then check door switch if you open and close the door and can hear the door switch click its usually good then the heating element. All theses items can be tested with a multi meter you can find for 10 t0 15 dollars at Walmart.
6/27/2022 7:08:05 AM •
on Jun 27, 2022
Not finding what you are looking for?