20 Most Recent Bosch Maxx 6 WAB28260GB White 600 mm Washer Front Loading, 6kg, A Energy Rating - Page 6 Questions & Answers

Try the above. They are listed as knowing your brand codes.

Bosch Washing... | Answered on Apr 16, 2019

What is a Bosch Max 800??

Bosch Washing... | Answered on Apr 14, 2019

chek if you have power by the on of button , if tere is power , chek transformer , if there is power on both sides , if motor have a capacitor , test it don,t get shocked ,u can test it with a meter , or it must be abel to make a spark, look for lose wires , chek if tere is belds on the motor and the drum ,chec if the pully on the motor axes is not lose , that the motor run but not the drum ,chec the power lead and the male plug that go to the wall , find the book let in dex for ansers lastly phone your electrical persone , but don ,t get shoked ! please hope it helped

Bosch Washing... | Answered on Apr 07, 2019

E00 usually requires a technician to reset, although you may manually do it by pressing and hold the start button for five seconds the "feature" should disable. E21 is blocked filter or excess of fabric in the filter over time. Turn the appliance off by the main supply, access the filter located on the bottom kick plate. Remove the filter and clean in hot soapy water, check the propeller for fabric debris. Run a hot wash without any clothing 70C or above with 1/4 cup white vinegar, you should do a maintenance wash at least every month and clean and remove the powder draw or detergent draw and inside every 2 weeks, clean the rubber door seal remove coins which are common and build up of debris

Bosch Washing... | Answered on Mar 29, 2019

1.while it was working it has high temprther with very hot water??
2.and now machine has stoping sotting tast only gining mathin sound?

Bosch Washing... | Answered on Mar 23, 2019

Check the door lock switch

Bosch Washing... | Answered on Mar 14, 2019

First check the if there's a debris screen on the got water inlet, as it may be plugged. Make sure the hot water volume is good. With hot water hose disconnected at the washer, put end of hose in bucket and turn on hot water. You should get 20L (5Gal) a minute minimum. If water volume is good and screens are not plugged, then likely the hot water inlet valve has seized. Could be both hot/cold valves are integrated so both get changed. Not a bad idea to just do them both if separate hot/cold valve.
If you know how to use a volt meter you could check power at the hot valve to make sure its not a control issue or swap the control wires and select a warm temp cycle. If you get cold water then its not a control issue.(dont forget to put wires back)

Bosch Washing... | Answered on Mar 14, 2019

disconnect the power the door unlock within 30 secound

Bosch Washing... | Answered on Mar 12, 2019

I have a Siemens WM16S772DN washing machine and encountered the error code "F:67" followed by repeated beeps. (Note: Siemens and Bosch are related companies). I called Siemens and they said the code means "Fatal error" or program error. The service technician was called, and he replaced the electronic board and reprogrammed it.

Bosch Washing... | Answered on Mar 09, 2019

Not finding what you are looking for?
Bosch Maxx 6 WAB28260GB White 600 mm Washer Front Loading, 6kg, A Energy Rating Logo

Popular Tags

7 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts


Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

peter gittos
peter gittos

Level 2 Expert

247 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Washing Machines

  • Bosch Washing Machines

Most Popular Question

fix faulty door switch

  • Washing Machines