Blaupunkt BLA32/147 32" LED TV 1920x1080, 50 Hz, Freeview, HDTV - Page 4 - Answered Questions & Fixed issues

Ive never heard of that make!!

I do not know this TV but my reaction would be to unplug any external monitors so its working just its own, then turn it off (by the mains) wait five minutes then turn on and see if anything has changed. If not then see if you can get the menu up, if you can find its system reset/ restore to bring it back to when it was new, this will mean you will have to reset things but it might clear any other issues. Should that fail then I suspect its graphic IC has failed which will be a new TV because modern sets are not worth repairing beyond about 3 years less so for the real cheap types, due to technology moving on which results in older models losing value very quickly. Hope this helps..........

The forum///or utube

There is usually a process for resetting the TV to factory just like cell phones (you will have to google it for your specific TV), once this reset is done and no progress I suggest that there is electronic issues and capacitor/s typically need to be replaced, or its a backlight issue and that may be more difficult to fix but can be seen on youtube videos for examples of what needs to be done.

It sounds to me that you no longer have standby voltage. If you are good with a multimeter, I would measure voltages on your power supply, check the fuse, and see if there are any burned components or bulging capacitors. Also check that you have your right voltage from the wall. Trying an outlet you know that works would be good if you don't have a multimeter.

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

In the front of the DVD tray, look for a tiny hole. Straighten out a paper clip, push it into the hole and the tray may release.

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Unlock procedure and to override the password lock of many popular brand TVs and other devices are given. Search the site by type in this key phrase "How to unlock television"; in the search box at the top left of the display window, to get gathered related posts.

If you do a google search or a worldwide search on Ebay you might find a replacement somewhere. I obtained a replacement Grundig pattern control from Germany for a fifteen year old set. You might be lucky. Sorry if this does not directly answer your question but it is an alternative possibility particularly if the remote you do have is unusable. Good Luck

Then just put the numbers or go back where you bought it and if they say they dont know then tell them thanks well thanks for helping me or youcan go ask them if they know a place where they can fix that hey ask fixya for that they can solve your problem in just one minute then you will be happy now o and thanks for my opinion

If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box. http://electronicshelponline.blogspot.com/ http://remotesearch.blogspot.com/ http://electro-medical.blogspot.com/ http://electrohelponline.blogspot.com/ Type in the brand name of your device, in the search box [at the top right] of the display window, and press enter to get all related posts. It will make surf easy.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/

go to the options and change the aspect ratio. This sound slike the only thing to cause this.

Sorry, we do not supply anything. I would aproach the supplier or manufacture for advice and spares availability.

Sorry, but we do not supply parts. This is a website for advice on repairing items. You could try contacting the store you bought it from or contacting iheater directly.

Refer its user manual for details.

Put the batteries back in and aim the front ot the remote at the front facing selfie camera on a smartphone. Press a button and you should see a flash. If no flash, the remote has failed. If there is a flash, the television IR module or main board has failed.

Telefunken Replacement TV Remote TLED-26FHDPA

Soundtech https://soundtech.co.za > telefunken-replacement-tv-rem... Telefunken replacement remote compatible with TV models: TLCD-29FHDP TLCD-32FHDA TLCD-32HDA TLCD-37FDHA TLCD-37FHDA TLCD-39FHDP TLCD-40FHDC TLED-26FHDPA ZAR 199.00 ..

Question edited for a lot more clarity, full 'make model (what it is)'. There is more to this that meets the eye because your set is analogue and the new cable box is digital. Have a read

Is it possible to modify my kitchen Venturer KLV39103C tv in

JustAnswer https://www.justanswer.com > TV Problems Jun 9, 2021 - Your TV has only one external input and it's an analog coaxial input, hence why the converter and modulator will be needed. 1 answer · Top answer: You are very welcome. In my opinion, it would be much simpler to simply j More here https://www.google.com/search?q=venturer+klv39103+convert+to+digital ..

Try replacing the batteries in the remote.

Don't use Universal Remotes. $20 for a facsimile copy of the original. No programming. https://www.google.com/search?q=harwa+tv+model+hw-32l1+remote+control https://www.google.com/search?q=harwa+tv+model+hw-32l1+remote+control Harwa Codes https://www.eliztech.com/remotes/codelists/harwa-tv-codes-for-ofa ..