20 Most Recent
PfaFF Sliding Buttonhole Foot 98-694882-00 - Page 5 Questions & Answers
My embroidery unit won't start in pfaff 7560 when hoop is in place
You should not place the hoop into the embroidery unit of the Creative 7560 until you see a prompt "Cover and insert frame 120" (or 80 if using the small hoop) on the LCD display. See
https://www.manualslib.com/manual/504999/Pfaff-Creative-7560.html?page=91#manual . This allows the sewing machine to freely test/calibrate the embroidery unit. Other Pfaff machines, for example the Pfaff Creative 3.0, prompt you to remove the hoop and clear the embroidery unit area for it to do this step. (For this information see page 7:3 (75 of the PDF) of the Creative 3.0 manual: http://www.pfaff.com/SiteMedia/PFAFF/Products/Machines/creative-line/creative3_0/Manual/creative_3_0-manual-EN.pdf .)
I hope this helps.
Cindy Wells
My Pfaff 1471 lights up,
Were the base plate pugs into the power leads, you should read about 6-18 is ohms. Open and short is a bad transformer.Also there are fuses, 2-3 right next to the transformer, small blueish and round are the shapes. They go bad often.
How to fill bobbins on Pfaff 332
The Pfaff 332 has a stop motion mechanism that is a small knob in the middle of the hand wheel. This disengages the needle and allows you to wind the bobbin without having to check on the material to be sewn. Hold the hand wheel so that it will not move. Turn the stop motion knob counter-clockwise (turn the knob all the way to the left). Put a second spool of thread (of appropriate weight and color) on the right hand pin. Lead the thread from the spool around the thread retainer clockwise. Pull the thread into the guide and then push the thread through the slot in the bobbin from inside the bobbin. Place the bobbin onto the bobbin winder spindle so that the key at the base of the spindle enters the slot in the bobbin. Press the lever into the bobbin. Hold onto the thread end and slowly start to wind the bobbin. After a few winds of the thread, break off or cut the thread that is above the bobbin. Continue winding the bobbin (at any speed). When the bobbin is full the lever will automatically move back to its original position. (If you do not need a full bobbin, move the lever when the bobbin is sufficiently full.) Remove the bobbin from the bobbin winder spindle and cut it free of the spool thread. Return the stop motion mechanism to the right by turning it clockwise while holding the hand wheel.
Pfaff has a manual for the 332-260 on their support page:
http://www.pfaff.com/en-US/Support-and-Updates/Support . The link to the machine page is
http://www.pfaff.com/en-US/Support/3421 . The current link to this manual is
http://www.pfaff.com/SiteMedia/PFAFF/Products/Machines/Support-manuals/pfaff_332-260-manual-EN.PDF . See pages 13-14 of the manual for some pictures of the guides and levers.
I hope this helps.
Cindy Wells
Can't adjust tension on pfaff 1475 cd. thread all bunched up underneath. have rethreaded it and adjusted tension.
Hi, Your problem is the UPPER tension. The thread may not be getting between the tension discs. Try this: Make sure the presser foot is up and thread the machine stopping short of the eye of the needle. Pull on the thread and it should move easily, Now drop the presser foot and you should feel tension on the thread. Adjust the tension up and down and you should feel a difference.
If there is no change then there is something keeping the tension discs open.
Bob
Not finding what you are looking for?
