20 Most Recent Honeywell 5804 Ademco Wireless Security watch Questions & Answers


It is located inside a tan colored metal box 12"wide by 15" tall and 4" deep; unless it is flush mounted, then only .5" deep. inside you will most likely find a 12 volt 4 or 5 or 7 amp hour battery. Note; the door may have a lock on it. I have found the key on top of the box, in the lock, and unlocked. The box could be located anywhere but, many times in closets, utility rooms, garages, crawl spaces, etc.

Honeywell 5804... | Answered on Jun 15, 2017


Turn the alarm off two times. If it still indicates A/C not ready, press the * key and it will tell you what zone is open or what zone has a low battery.

Honeywell 5804... | Answered on May 14, 2017


"bf" stands for "Back up failure. Your system communication to the monitoring station is working on phone lines only if it's tied into them. I would call the monitoring station and see if it's still communicating.

Honeywell 5804... | Answered on Mar 14, 2015


6150 is the type of keypad you have the alarm system itself. The 6150 works on a number of different Honeywell panels. You need to locate the main metal box and open it. There should be a white sticker on the board with the panel type. (Ex. v10,v20, Vista...)

Honeywell 5804... | Answered on Mar 14, 2015


It's something that has to be done in the systems programming. A programming guide will most likely also be needed.

Honeywell 5804... | Answered on Mar 14, 2015


The answer above is incorrect. If the back up battery was low it says, "bat" on the screen and that's it. Since the "11" is being displayed, zone #11 on your wireless system as a low battery.

Honeywell 5804... | Answered on Mar 14, 2015


Get into programming then enter # 197. If you get a zero and a beep, enter *1971 then get out of programming. This will work on vista-15p, vista-15psia, vista-20p, and vista-20psia panels

Honeywell 5804... | Answered on Oct 02, 2013


123 battery for the xmtrs and motion.not sure about the watch.123s are available at cvs or walgreens or where ever.

Honeywell 5804... | Answered on Dec 06, 2012


I dont know why you put this under "watches" but I found a Honeywell customer support site at:

http://www.security.honeywell.com/contact/support/index.html

Honeywell 5804... | Answered on Sep 17, 2011


without knowing the system type I can only guess. try entering 4 digit code then 1. if you don't know the code and have never really used system try 1234 then 1. this is assuming you have an ademco panel.

Honeywell 5804... | Answered on May 22, 2011


enter your 4 digit code then 9 example 1234 then 9

Honeywell 5804... | Answered on May 22, 2011


Your current monitoring company would take information from you that is typically on the cell radio then upload it with any changes they need. Your new monitoring company should be able to help GL.

Honeywell 5804... | Answered on May 22, 2011


I have found the User Manual, Installation Manual, and the Programming Form at the following website:
http://www.diyalarmforum.com/board/index.php?topic=95.0

However, this is a restricted website and you must register to download these manuals and forms. And, the Admin. must approve the request before you can download them.

You can view the Installation Instruction Manual here without registration:
http://www.info-techs.com/ademco/files/controls/installation/4110xmii.pdf

Additional programming information can be viewed here:
http://forum.doityourself.com/archive/index.php/t-175366.html


Contact ID Format Guide:
http://www.walkerhomesecurity.com/home_alarm_manuals/ademco/a4130xm.pdf

I haven't been able to reference the # 91 code unless I just overlooked it.

Honeywell 5804... | Answered on Feb 10, 2011


First of all, what is the model number of your control panel? Setting a new master code is different for different models. The model is usually named on the diagram on the inside of the control panel cabinet.

Honeywell 5804... | Answered on Oct 15, 2010


Check 09 indicates a problem with an expansion device, either a hardwired expansion board (4219 or 4229) or wireless (RF) receiver (5881 or 5883 in Canada) or RF receiver integrated in one of your keypads. What expansion device(s) do you have?

Honeywell 5804... | Answered on Oct 15, 2010


tires36, This forum isn't showing prior posts. I answered a lot of posts yesterday and I'm not sure which one your was. Try posting your problem in diyalarmforum where we can talk back and forth.

Honeywell 5804... | Answered on Oct 10, 2010

Not finding what you are looking for?
Honeywell 5804 Ademco Wireless Security watch Logo

81 questions posted

Ask a Question

Usually answered in minutes!

Top Honeywell Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Bruce Robin

Level 2 Expert

300 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Honeywell Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Honeywell Watches

  • Honeywell Watches

Most Popular Question

honeywell ademco alarm panel beeped

  • Watches
Loading...