20 Most Recent Toshiba 43A10 43" Rear Projection Television Questions & Answers

0helpful

1answer

Is there a good replacement remote for my 43a10 t.v.? I need to adjust the convergence and my universal will not work.

TV Parts Universal TV Stands DLP Chips ShopJimmy See if these guys have an original remote.

Read full answer

1/30/2018 6:46:40 AM • Toshiba 43A10... • Answered on Jan 30, 2018

0helpful

4answers

43A10 43in

Hi,

Yes, the screen can be replaced. The screen is comprised of 3 screens. The Fresnal Screen (inner screen), Lenticular Screen (middle screen), and the Protective Screen (outer screen). Please see below for links to these items.

Need all 3 to complete screen assembly.The only screen that is still available is the innermost screen, which is probably not the 1 you need. You will only be able to find the middle (lenticular) and outer (protective) screens from a distributor that has them in stock as no one will be able to order them from the manufacturer.

Fresnal Screen
Lenticular Screen (no longer available)
Protective Screen (no longer available)

Read full answer

5/5/2015 4:41:51 PM • Toshiba 43A10... • Answered on May 05, 2015

0answers

Toshiba 43a10 won't turn on

Read full answer

Be the first to answer 4/11/2014 4:31:18 AM • Toshiba 43A10... • Posted on Apr 11, 2014 • Be the first to answer

manual

43A10 43" Rear Projection Television Manual

Toshiba Televison & Video • Uploaded on Oct 15, 2013

0helpful

1answer

No picture

Hello waylongross,

This might be an indication that your voltage tripler have gone bad. You will have to use a HV probe to measure the voltage on the anodes of your Red Green and Blue CRTs to see if there is HV present. Then you will have to measure the voltage off of the IHVT (Integrated High Voltage Transformer) to see if it is delivering the proper voltage to the voltage tripler. If there is not HV at the IHVT then you will have to check the HV and Horizontal Circuits for a problem.

If you do not have the equipment for these checks I would advise that you take the TV to a qualified TV repair shop or have a technician come to you place to check the TV.

I hope this helps,

Thank you,

Shuttle83

Read full answer

7/2/2013 10:09:18 AM • Toshiba 43A10... • Answered on Jul 02, 2013

0answers

I have a toshiba 43v7da rear projection tv and when turned off last it won't turn back on no blue screen or anything just blank. do i need to buy a new bulb.

Read full answer

Be the first to answer 6/17/2012 4:01:41 AM • Toshiba 43A10... • Posted on Jun 17, 2012 • Be the first to answer

0helpful

1answer

How do we get the blue shadow out of the tv screen

if it looks at all like the attached photos you replace the two convergence chips

Read full answer

6/16/2012 3:56:00 PM • Toshiba 43A10... • Answered on Jun 16, 2012

0helpful

1answer

Setting color and contrast

contrast on this model usually at a max of 75 percent and color at about 50 percent.What issue or problem does the set have if any?

Read full answer

5/16/2012 4:33:32 PM • Toshiba 43A10... • Answered on May 16, 2012

0helpful

1answer

A speaker wire on my Toshiba 43A10 rear projection tv came loose when I wanted to replace the speaker, it fell onto the cuircut board and made a short, tv switches on but no pictute or sound

set has a number of pico fuses (up to 7) that are not glass and look like a small resistor and are usually orange, green in color--all will have marked on top of board amperage which is a easy way to find them--have to test them like any fuse (set unplugged please) as they will look perfect even when bad.

Read full answer

4/24/2012 3:29:44 PM • Toshiba 43A10... • Answered on Apr 24, 2012

0answers

Our Toshiba 43A10 projection TV stopped displaying

Read full answer

Be the first to answer 8/21/2011 3:47:21 PM • Toshiba 43A10... • Posted on Aug 21, 2011 • Be the first to answer

0helpful

1answer

Toshiba 43VJ22P, the colours blue

You will need to replace the Convergence ICs ,they are Big Black ICs and will have part number on them. Example STK392-110
Mats Electronics has Parts 1-800-628-1118

Read full answer

6/30/2011 11:59:39 AM • Toshiba 43A10... • Answered on Jun 30, 2011

0helpful

1answer

Hi , i have toshiba

Hi,
I would like to view that short video clip to diagnose possible cause of picture problem and would you please confirm model number of tv that would be written at rear?
Thanks.

Read full answer

5/7/2011 9:44:46 PM • Toshiba 43A10... • Answered on May 07, 2011

0helpful

1answer

I have a toshiba tv

While percussive maintenance works in the short term, it's going to be time to fix it sooner or later.
I would specifically check for cold solder joints on the power board.
Touching up the solder connections even if they don't look bad may provide the answer.
Try moving the cables or tapping the boards while it's on with an insulated instrument (I use a sharpie plastic marker myself) until you zone in on what board and eventually what connector/cable/component is causing the issue.
When in doubt, if you at least locate the board with the problem, SOLDER EVERYTHING.
if you actually locate the issue though, just solder the area that needs it.

Read full answer

4/12/2011 2:47:58 AM • Toshiba 43A10... • Answered on Apr 12, 2011

0answers

Hi there, I own a toshiba 43vj22p tv and of recent

Read full answer

Be the first to answer 12/28/2010 5:47:40 PM • Toshiba 43A10... • Posted on Dec 28, 2010 • Be the first to answer

0helpful

1answer

Picture appears to be 3d

Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.
This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....
•Screen looks 3D
•Colors don't line up
•One or more colors can't be adjusted when using the convergence menu.
•Screen is bowed or warped.
•TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.

Here are some photos of convergence problems

CONVERGENCE SOLUTION

You can see some more examples and find a fix using this link on Fixya - CLICK HERE

Read full answer

8/28/2010 4:06:03 AM • Toshiba 43A10... • Answered on Aug 28, 2010

0helpful

2answers

Have a model 43A10 toshiba tv, has a purple color

you either have a color purity problem or a convergence problem. purity can be effected by electro magnets in power supplys of audio amps and subwoofers too close to the tv

Convergence is the ability of the red green blue to drop on top of each other. can usally be adjusted via remote control. Please claify and repost.

Read full answer

7/30/2010 10:55:11 PM • Toshiba 43A10... • Answered on Jul 30, 2010

0helpful

1answer

It's like watching 3d

Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

This is a very common failure on these projection sets and a fairly simple DIY fix. All projeciton sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....

Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.

Here are some photos of convergence problems.

Here is a quick test....

Using your original remote go-to the settings menu then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move RED and BLUE in all directions - up, down, left, and right. And you should be able to get the grid straight.

If you can't move them in all directions or cant move them far enough your convergence chips are bad and should be replaced. This is a common problem.

Note: If you TV has as flash focus or magic focus button only try pressing the button. If it fails to fix the convergence your need to fix it. See below for a fix

CONVERGENCE SOLUTION

You will need to replace the convergence chips and possibly some convergence resistors and pico fuses.
This is a a fairly easy DIY job if you are handy and can follow directions. You can get complete repair kits from TvRepairKits.com or click here. They have put together DIY repair kits that include the OEM parts and step by step photo instructions for each repair. If you are not handy or can't follow directions we would suggest calling a shop.

Read full answer

7/11/2010 6:44:03 AM • Toshiba 43A10... • Answered on Jul 11, 2010

0answers

Hi i have a toshiba 43v7da television which ive

Read full answer

Be the first to answer 7/8/2010 9:15:00 PM • Toshiba 43A10... • Posted on Jul 08, 2010 • Be the first to answer

0helpful

1answer

Where can i get the plexie glass cover for the

YES j.d.w.

Read full answer

6/25/2010 3:38:25 AM • Toshiba 43A10... • Answered on Jun 25, 2010

0helpful

1answer

My sound just went out on the Toshiba, the volume

It is either the speaker, or the Audio amp.
http://www.eserviceinfo.com/downloadsm/20698/Toshiba_43A10.html
Above is a service and repair manual to download.

Read full answer

5/22/2010 11:03:34 PM • Toshiba 43A10... • Answered on May 22, 2010