20 Most Recent Toshiba 50A62 50" Rear Projection Television Questions & Answers


there is a few things that can cause that 1 the bulb blew 2 the cooling fan quit or 3 the hitemp sensor for the bulb is bad sometimes its cheaper to replace a rear projector tv then to repair a bulb on some models can run $600.00

Toshiba 50A62... | Answered on Aug 23, 2013


person with the TV: it is soldered to two pins where the opening in the back is--either that or a two pin plug is there with no wires now.

Toshiba 50A62... | Answered on Jun 08, 2012


Check the 1.8 ohm resistors,located in front of ICs. Try replacing all 3 of them.

Toshiba 50A62... | Answered on Jun 23, 2011


Hello
Remote sensor is an internal component, and can be locakted just beneath the remote sensor window at the front panel of all TVs. It is usually a three terminal black colure component, diretly soldered to a circuit board. In some sets, it will be on a seperate circuit board, and in some otheres it will be soldered to the front panel control switches board. OK.

Toshiba 50A62... | Answered on Mar 06, 2011


Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded overs.


You can find more details and solutions here on Fixya at the following link below. Or click HERE


3d884ac.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Toshiba 50A62... | Answered on Oct 15, 2010


Sounds like a convergence failure, here is a tutorial I made:
http://www.fixya.com/support/r5001731-convergence_diagnosing_convergence
Let me know if I can be of further assistance.

Toshiba 50A62... | Answered on Sep 09, 2010


You can quickly test the remote in question with a digital camera... please vist my Tips & Tricks so see how.

Toshiba 50A62... | Answered on Mar 16, 2010


snap off the fron cover its pretty tight so kind of pull hard dont worry it wont break its just snaped on tightly, after uncrew 3 screws under the screen lift up and pull out screen there will be 2 wires attached to screen, unplug them to set screen to side. dust off the projectors with dry rag, then clean mirror with windex or any window cleaning product. u are done cleaning front of Toshiba, put everything back together, then unscrew the bottom back and vaccum any dust balls u will see inside T.V. u r now done! let me know how it went.

Toshiba 50A62... | Answered on Jan 29, 2010


does it look like these?
http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Toshiba 50A62... | Answered on Dec 05, 2007


CHECK WITH TOSHIBA WEBSITE

Toshiba... | Answered on Jan 14, 2020

Not finding what you are looking for?
Toshiba 50A62 50" Rear Projection Television Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Toshiba Televison & Video

  • Toshiba Televison & Video

Most Popular Question

toshiba rear projection tv model 51vw9ua

  • Televison & Video
Loading...