Top 20
Tamron Zoom Telephoto AF 70-300mm f/4.0-5.6 LD Macro Autofocus Lens for Canon EOS - Page 5 Questions & Answers
User instruction manual DS534?
since you did not specify manufacturer Igoogled you question and came up with senco.
copy and paste
https://www.senco.com/senco-tool/ds534-ac/
5/10/2023 3:22:01 PM •
Cameras
•
52 views • 0 helpful votes
My replay xd1080 camera battery will not charge.
If your Replay XD1080 camera battery is not charging and the green charging status LED does not illuminate when plugged into the charger, it is possible that the battery needs to be replaced.
Replacing the battery can be a DIY project, but it may require some technical skills and tools. If you are comfortable with opening up the camera and handling electrical components, you can try replacing the battery yourself. However, if you are not confident in your ability to do so, it is recommended that you contact Replay customer support for assistance.
When contacting customer support, be sure to provide them with as much information as possible about the issue you are experiencing, including the fact that the green charging status LED is not illuminating. They may be able to provide you with troubleshooting steps or determine if the battery needs to be replaced.
3/11/2023 8:09:48 PM •
Cameras
•
192 views • 1 helpful votes
Light on Segway ninebot charger keeps blinking green.
A blinking green light on a Segway Ninebot charger typically indicates that the charger is properly connected and charging the device, but the battery is not yet fully charged. Once the battery is fully charged, the light should turn solid green. If the light continues to blink green and the battery does not charge, it could be an issue with the charger or the battery. Try using a different charger or testing the charger on another device to see if it is working properly. If the issue persists, contact Segway Ninebot customer service for further assistance.
1/13/2023 9:31:17 PM •
Cameras
•
388 views • 0 helpful votes
Night Hunter remote controller red light comes on wene charging but doesn't charge why
It is likely that the charger or the battery is not functioning correctly. If the battery is not taking a charge from the charger, then the battery may need to be replaced. You may also need to check the charging cable and port for any damage or corrosion. If the charger itself is not working, then it may need to be replaced.
Additionally, you may need to check the internal components of the remote controller for any issues. If the components are damaged or malfunctioning, then they may need to be replaced or repaired in order to get the remote controller working correctly.
12/26/2022 4:25:34 AM •
Cameras
•
589 views • 2 helpful votes
Can an iegeek battery camera be opened up successfully?
If there is no obvious battery compartment on the camera or any visible screws DO NOT try to open it up. Some of these cameras are built as "sealed units" meaning once they become faulty you just replace the whole thing. These cameras are clipped together with pegs moulded into the outer case. If you force the case open they tend to break off and can't be fitted back together and are no longer weather proof making the camera useless.
1/7/2023 3:22:56 PM •
Cameras
•
380 views • 1 helpful votes
I need a Winait camera manual please?
Question edited for clarity.
No model number given, so generic guesswork, plus a link to the maker.
http://www.winait.com/sdp/316052/4/pd-1265240/12676298-2946016/18MP_digital_camera_with_2_7_tft_display_4_x_dig.html
Digital Camera Owner Manual
mypni.eu
https://www.mypni.eu > download > manuals
PDF
This camera supports any compatible SD memory card up to 32GB. Limited internal memory is only for you to take test photo, these photo will be lost when you ...
18MP digital camera with 2.7'' tft display 4 x digital zoom ...
Winait
http://www.winait.com > ... > Digital Camera
DC-530I winait China, Main Feature 18/16.0Mega pixel Anti-Shake 2.7" TFT LCD Face ... Accessories USB cable ,hand strap, pouch,user manual,Li-ion battery,CD ...
Winait Instant Film Camera,Manual Control Kids Old ...
Alibaba
https://www.alibaba.com > ... > Digital Camera
1:100% hand-powered instant camera. Taking instant photos without batteries needed. 2:100% Analogue. 3:100% Manual Control. 4:An unprecedented instant ...
Type: Still Camera
Sensor Element Type: CMOS
Special Feature: Cheap Camera
Optical Zoom: Fixed Focus
Rating: 4 · Review by anonymous · US$29.99 · In stock
..
3/23/2023 1:24:03 PM •
Cameras
•
42 views • 0 helpful votes
The old batteries in the iota triceratops corroded. One of the spring in the battery compartment broke how can I fix this so it will work again
It sounds like the battery compartment of your Iota Triceratops may be damaged and in need of repair. Depending on the severity of the damage, there are a few options you can try to fix it.
One option is to try to clean the battery compartment and remove any corrosion that may be present. You can use a small amount of baking soda mixed with water to create a paste, and then use a soft cloth or brush to apply the paste to the affected area. Once the paste has been applied, use a damp cloth to wipe away any excess and let the battery compartment dry completely before reassembling the device.
If the damage is more severe, such as a broken spring, you may need to replace the battery compartment or seek professional repair. You can try contacting the manufacturer of the Iota Triceratops for assistance in finding a replacement part or for information on where to send the device for repair. Alternatively, you may be able to find a replacement battery compartment or repair services through an online retailer or a local electronics repair shop.
12/25/2022 8:26:18 PM •
Cameras
•
261 views • 0 helpful votes
Got a Ryobi charger that was plugged in on 220v and varistor looks burned, if I change varistor?would that fix the problem??
A varistor, also known as a voltage-dependent resistor (VDR), is a component that helps to protect electronic devices from voltage surges. If the varistor in your Ryobi charger looks burned, it is likely that it has been damaged by a voltage surge and will need to be replaced.
Replacing the varistor may fix the problem, but it is important to keep in mind that the charger may have sustained other damage. It is also important to identify and correct the underlying issue that caused the varistor to burn out in the first place.
It is also important to verify the charger's specifications and the voltage you are using, as some chargers can be damaged if connected to a voltage that does not match with the charger's specifications.
If you are not familiar with electronics repair, it might be best to contact a professional technician to diagnose and fix the problem. Additionally, you can share pictures of the inside of the charger, this way the technician can have a better understanding of the problem and can guide you better.
1/19/2023 2:34:57 PM •
Cameras
•
115 views • 0 helpful votes
On off switch is in on position but camera is not working
It's possible that the switch mechanism inside the camera is stuck or damaged, causing it to stay in the on position. You can try a few troubleshooting steps to see if it resolves the issue:
- Remove the batteries from the camera, wait for a few minutes, and then reinsert them. This may reset the camera and resolve any temporary issues.
- Clean the battery contacts inside the camera with a dry cloth or cotton swab. Sometimes, dirt or debris can accumulate on the contacts and prevent the camera from turning on.
- Check the battery compartment for any signs of damage or corrosion. If there is any damage, the switch may not be making proper contact with the batteries.
If none of these steps work, it's likely that the switch mechanism needs to be repaired or replaced. You may want to take the camera to a professional repair service or contact the manufacturer for assistance.
2/24/2023 7:32:22 PM •
Cameras
•
41 views • 0 helpful votes
Not finding what you are looking for?