20 Most Recent Tamron 75-300mm f/4.0-5.6 LD Lens for Minolta Maxxum - Page 9 Questions & Answers

Maybe it's just sulking - try taking it tea in bed tomorrow

Cameras • Answered on Aug 30, 2020

Where the manual suggests you insert it.

Cameras • Answered on Aug 30, 2020

This seems to be a manufacturing problem. When the disk is loaded it is centered on a spindle and to make sure that centering succeeds a magnet mounted to a small white rotating plastic piece on the top of the DVD drive. The magnet seems to bee too strong on my machine so the spindle isn't able to disengage when trying to open the tray. The result is blocking. It is of course possible that the electric motor moving the tray and the spindle movement is too weak. Anyhow this is how I solved the problem on my Philips Video/DVS DVDR3510V: 1) Disconnect the device from mains power.2) Unscrew the eight screws holding the top in place.3) Unscew four black screws keeping the DVD unit fixed to the main body.4) Carefully drag the DVD slightly back which allows you to rotate it to point sideways (this allows simpler testing of the mechanical working).5) Unscew the two blank screws keeping the front half of the top of the DVD unit in place.6) Using a small screw driver carefully bend the clips to allow the top plate to be removed.7) Connect the mains power and don't ouch anything inside.8) After startup try Eject/Load several times to ensure that the DVD unit is mechanically working OK. If the Eject/Load doesnt work with the top off there is no use going further.9) Disconnect mains power.10) Use a small felt tipped pen to mark the face of the small metallic (magnet) part in the center of the white movable component fixed to the top.11) Using a small flat screw driver carefully open the clips holding the two halves of the white component together. Careful! The clips may break easily.12) Cut small pieces of tape (or use thick drawing paper). The idea is to lift the magnet slightly upwards. We thus use tape or paper as shims. Notice that a hole is needed in the center.13) When the shims are in place put the magnet back oriented correctly (if you didn't mark it test it against the spindle rotating the disk. The correct orientation is where the magnetic force is strong.14) Mount the halves back into the hole in the top component and align the clips. Then press the halves together until the clips connect.15) Put the top component back and clip it into place. No need to screw in the screws yet.16) Connect mains power, don't touch anything inside.17) Check that the tray now opens both with a disk and when empty. Check that a DVD is recognized correctly (too little pressure leads to disk loading failure).18) If the DVD unit now works assemble it and you are done. The first picture shows the white round plastic part that is modified on the left hand side of picture.The second picture shows an additional support I glued to the top with super glue because the top is fairly flexible. Initially I thought this was the reason why the spindle got stuck. I think the extra support is unnecessary but i didn't bother with removing it. 11_10_2011_5_05_06_pm.jpg11_10_2011_5_05_22_pm.jpg

Cameras • Answered on Aug 20, 2020

The Garrett Gold metal detector is designed using a waterproof control housing and waterproof connections. These features protect the detector in dusty, murky, wet and moist environments. The AT Gold can be submerged in water to a depth of 10 feet. Garrett Gold Pan Kit Review Detectorly

Cameras • Answered on Aug 13, 2020

it depends on your need. if you want to post the image to instagram,facebook etc. then go with jpeg. for images like screenshots or graphics, PNGs are better suited. you can use https://theimagekit.com to convert one type to another.

Cameras • Answered on Jul 26, 2020

Check your Internet bandwidth by using an online speed test, such as nperf,or and Speedtest, or Comparitech. Contact your corporate IT department to check your WiFi and internet hotspots. Turn off the group HD in your Account Management if your WiFI bandwidth is insufficient. Turn off your corporate VPN if it is not required for the meeting.

Cameras • Answered on Jul 22, 2020

You are shorting something inside the camera. This can even be a faulty SD card.
Battery problem: bad quality of the battery bring this challenges. It normally occurs when the battery has been user beyond its operation.

Cameras • Answered on Jul 12, 2020

This forum is for Cameras. The item about which you are enquiring is a watch. Try using Google for a manual.

Cameras • Answered on Jul 04, 2020

Only if you want explosions and a fire. These batteries are NOT re-chargeable in any charger.

Cameras • Answered on Jul 02, 2020

Any make or style of camera can have a stuck shutter - it is not confined to digitals. Two options - replace or repair.

Cameras • Answered on Jul 02, 2020

The Satio plays these formats

Audio types = MP3, AAC, AAC+, eAAC+, WMA
Video Types = 3GPP, MPEG4
Ringtones = MP3, AAC

If you want the full spec's of the phone go here

Sony Ericsson Satio specifications from o2

and for converting videos you can use this and its free

Free Video Converter - Any Video Converter Free Version - convert video to any formats, avi to MPEG, avi to MP4, flv to MPG

Cameras • Answered on Jun 30, 2020

Wild guess, there is a security code to prevent theft. A dealer would know the code if you don't have it in the owner's manual somewhere.

Cameras • Answered on Jun 29, 2020

SD card, must be an Android phone or tablet. Watch this video about dr.fone for Android, it can help to recover deleted or lost photos from your phone or SD card. https://youtu.be/BOZOMqgSKhc

Cameras • Answered on Jun 29, 2020


fist of all remove the memory card from cam then don't use it like reading or writing until you recovery your files.

connect to computer and use any recovery software to recovery your data you use this

fallowing link to download a free software


if any problem while doing this mail me to [email protected]

Cameras • Answered on Jun 22, 2020

hi rednpat986. this is all i could find,if this does not work go to the link at the bottom. How to transfer photos from camera internal memory to SD card? Follow these steps:
  1. Insert a memory card into your camera.
  2. Turn on your camera.
  3. On the camera, press the Review button then the Menu button.
  4. On the Setup tab in the menu (your menu tabs might be named differently), select Image Storage.
  5. Select Internal Memory.
More items...

Transfer pictures from internal memory to a card - Kodak Support

camera How do transfer pictures from the internal storage to sd card...

Cameras • Answered on Jun 16, 2020

There will be an option for this contained within the menu system.

Cameras • Answered on Jun 07, 2020

Without knowing the make and model of the camera, it is difficult to provide a solution. However, if you remove the media card prior to turning it on, then select 'Factory Reset' (or equivalent) from the menu system, it may sort out the problem. Should this prove unavailing, then your next option is either repair or replacement.

Cameras • Answered on Jun 06, 2020

Not finding what you are looking for?
Tamron 75-300mm f/4.0-5.6 LD Lens for Minolta Maxxum Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top Tamron Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

595 Answers

Brad Brown

Level 3 Expert

18666 Answers


Level 3 Expert

6746 Answers

Are you a Tamron Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tamron Cameras

  • Tamron Cameras

Most Popular Question

attaching canon eos 400d rebel xti

  • Cameras