20 Most Recent Tamron 75-300mm f/4.0-5.6 LD Lens for Minolta Maxxum - Page 2 Questions & Answers

This is the UK service centre http://www.tamron.eu/uk/service/repair-service/

After doing a Google search this link may help you: https://www.google.com/search?client=safari&rls=en&q=tamron+lens+repair&ie=UTF-8&oe=UTF-8

Using Google search I came with this link: https://www.google.com/search?client=safari&rls=en&q=tamron+lens+repair&ie=UTF-8&oe=UTF-8

Repair manuals can be bought by certified repair centres. Sometimes you get the manuals when you have done the repair course at the firm. Not sure Tamron does so. But they most of the time don't sell these manuals to normal people, to avoid they start opening a lens, because they never will be able to put it together as a working lens, without the tools, like a collimator.

Did you switch the AF / MF switch to AF (Auto Focus)? It is on the lens.

all of my Tamron lenses have the serial number on the barrel of the lens right next to the "Made in Japan" label. When the lens is in the camera the MIJ label is on the bottom side. I hope that helps with your lens

Simple idea? Dont go to F32..just stay at F22 and increase the camera speed one stop. A little test will give you right calibration

No. The LA-DC58K only allows you to use the TC-DC58K teleconverter with your camera. The Tamron 28-200mm lens is intended for use with SLR (single-lens reflex) cameras, not with point&shoot cameras. As far as I know, there aren't any adapters which will allow you to use an SLR lens with the G10. A teleconverter is an add-on accessory that works with an existing lens. The 28-200 is a lens, which is intended to be used as-is. Using it on the G10 would basically require removing the built-in lens on the G10. As that lens can't be removed...

If you got a lens with a Nikon mount then you don't need anything else to fit it to a Nikon camera.

What mount do you have on the Tamron lens? (The built-in mount.) If it has a Nikon mount, you don't need an adapter at all. If it has the Adaptall mount then the adapter should fit onto the back of the lens, then the combo should fit onto your Nikon camera. If the lens has a different mount then nothing you can do will make it fit.Does the adapter fit onto the lens?

Do you have a lens collimator and other gear needed to ensure proper alignment when reassembling the lens? If not, leave the job to a properly trained and equipped professional.

It might help if you could tell us which error message you're getting.

Hi, all the Sony Alpha dslr's will work on these lenses, try to get a newer model, most of these older lenses are as good if not better than the new kit lenses that come with cameras now