20 Most Recent
- Page 4 Questions & Answers
We have a Panasonic Panafax UF-790
It could be a refilled Kyocera KM-F650 cartridge in a Panasonic UG-5510 box.
They look identical, but are configured differently.
You need to try another cartridge as it appears it is not a machine problem.
on Jan 06, 2009
Jamming paper at fuser. Paper try is pulling fine. Stops at Fuser
Open the fuser and look at the exit area. There should be little scrapers (pick off fingers). These are mostly spring loaded and rest on the upper fuser roller. If the spring or pressure level is missing or detached, the scraper /finger will hang in the paper path and catch the paper. There could be 4-6 scrapers. The main scrapers needed are the 2 ends and the middle. So if a spring is missing you could take the scraper/ finger out. **** MAKE SURE AS TO NOT SCRAPE THE FUSER ROLLER AS THIS WILL LEAVE A MARK ON EVERY COPY*****
on Jan 05, 2009
I got Panafax UF-595 and
There is a small plastic tab broken off of the front of the paper cassette.
Remove the paper cassette
remove the rear brown tray
remove the toner
set the machine on it's back side
wad up a small piece of electrical tape
stick the tape in the black U-shaped photo sensor at the bottom left corner of the machine to cheat it.
on Dec 10, 2008
File System Setup Message
one - there might be a memory card in you machine causing problems. if there is remove it when the power is off.
two- if you dont have memory you can try a shipment set. and if that doesnt work you main board is blown
any questions feel free to ask
on Dec 04, 2008
Not finding what you are looking for?